dmaengine: idxd: set defaults for wq configs

Add default values for wq size, max_xfer_size and max_batch_size. These
values should provide a general guidance for the wq configuration when
the user d

dmaengine: idxd: set defaults for wq configs

Add default values for wq size, max_xfer_size and max_batch_size. These
values should provide a general guidance for the wq configuration when
the user does not specify any specific values.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528473483.3926048.7950067926287180976.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: handle interrupt handle revoked event

"Interrupt handle revoked" is an event that happens when the driver is
running on a guest kernel and the VM is migrated to a new machine.
The d

dmaengine: idxd: handle interrupt handle revoked event

"Interrupt handle revoked" is an event that happens when the driver is
running on a guest kernel and the VM is migrated to a new machine.
The device will trigger an interrupt that signals to the guest driver
that the interrupt handles need to be replaced.

The misc irq thread function calls a helper function to handle the
event. The function uses the WQ percpu_ref to quiesce the kernel
submissions. It then replaces the interrupt handles by requesting
interrupt handle command for each I/O MSIX vector. Once the handle is
updated, the driver will unblock the submission path to allow new
submissions.

The submitter will attempt to acquire a percpu_ref before submission. When
the request fails, it will wait on the wq_resurrect 'completion'.

The driver does anticipate the possibility of descriptors being submitted
before the WQ percpu_ref is killed. If a descriptor has already been
submitted, it will return with incorrect interrupt handle status. The
descriptor will be re-submitted with the new interrupt handle on the
completion path. For descriptors with incorrect interrupt handles,
completion interrupt won't be triggered.

At the completion of the interrupt handle refresh, the handling function
will call idxd_int_handle_refresh_drain() to issue drain descriptors to
each of the wq with associated interrupt handle. The drain descriptor will have
interrupt request set but without completion record. This will ensure all
descriptors with incorrect interrupt completion handle get drained and
a completion interrupt is triggered for the guest driver to process them.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Co-Developed-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528420189.3925689.18212568593220415551.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: int handle management refactoring

Attach int_handle to irq_entry. This removes the separate management of int
handles and reduces the confusion of interating through int handles tha

dmaengine: idxd: int handle management refactoring

Attach int_handle to irq_entry. This removes the separate management of int
handles and reduces the confusion of interating through int handles that is
off by 1 count.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528417065.3925689.11505755433684476288.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: rework descriptor free path on failure

Refactor the completion function to allow skipping of descriptor freeing on
the submission failure path. This completely removes descriptor fr

dmaengine: idxd: rework descriptor free path on failure

Refactor the completion function to allow skipping of descriptor freeing on
the submission failure path. This completely removes descriptor freeing
from the submit failure path and leave the responsibility to the caller.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528416222.3925689.12859769271667814762.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmanegine: idxd: fix resource free ordering on driver removal

Fault triggers on ioread32() when pci driver unbind is envoked. The
placement of idxd sub-driver removal causes the probing of the devic

dmanegine: idxd: fix resource free ordering on driver removal

Fault triggers on ioread32() when pci driver unbind is envoked. The
placement of idxd sub-driver removal causes the probing of the device mmio
region after the mmio mapping being torn down. The driver needs the
sub-drivers to be unbound but not release the idxd context until all
shutdown activities has been done. Move the sub-driver unregistering up
before the remove() calls shutdown(). But take a device ref on the
idxd->conf_dev so that the memory does not get freed in ->release(). When
all cleanup activities has been done, release the ref to allow the idxd
memory to be freed.

[57159.542766] RIP: 0010:ioread32+0x27/0x60
[57159.547097] Code: 00 66 90 48 81 ff ff ff 03 00 77 1e 48 81 ff 00 00 01 00 76 05 0f
b7 d7 ed c3 8b 15 03 50 41 01 b8 ff ff ff ff 85 d2 75 04 c3 <8b> 07 c3 55 83 ea 01 48
89 fe 48 c7 c7 00 70 5f 82 48 89 e5 48 83
[57159.566647] RSP: 0018:ffffc900011abb60 EFLAGS: 00010292
[57159.572295] RAX: ffffc900011e0000 RBX: ffff888107d39800 RCX: 0000000000000000
[57159.579842] RDX: 0000000000000000 RSI: ffffffff82b1e448 RDI: ffffc900011e0090
[57159.587421] RBP: ffffc900011abb88 R08: 0000000000000000 R09: 0000000000000001
[57159.594972] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881019840d0
[57159.602533] R13: ffff8881097e9000 R14: ffffffffa08542a0 R15: 00000000000003a8
[57159.610093] FS: 00007f991e0a8740(0000) GS:ffff888459900000(0000) knlGS:00000000000
00000
[57159.618614] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[57159.624814] CR2: ffffc900011e0090 CR3: 000000010862a002 CR4: 00000000003706e0
[57159.632397] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[57159.639973] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[57159.647601] Call Trace:
[57159.650502] ? idxd_device_disable+0x41/0x110 [idxd]
[57159.655948] idxd_device_drv_remove+0x2b/0x80 [idxd]
[57159.661374] idxd_config_bus_remove+0x16/0x20
[57159.666191] __device_release_driver+0x163/0x240
[57159.671320] device_release_driver+0x2b/0x40
[57159.676052] bus_remove_device+0xf5/0x160
[57159.680524] device_del+0x19c/0x400
[57159.684440] device_unregister+0x18/0x60
[57159.688792] idxd_remove+0x140/0x1c0 [idxd]
[57159.693406] pci_device_remove+0x3e/0xb0
[57159.697758] __device_release_driver+0x163/0x240
[57159.702788] device_driver_detach+0x43/0xb0
[57159.707424] unbind_store+0x11e/0x130
[57159.711537] drv_attr_store+0x24/0x30
[57159.715646] sysfs_kf_write+0x4b/0x60
[57159.719710] kernfs_fop_write_iter+0x153/0x1e0
[57159.724563] new_sync_write+0x120/0x1b0
[57159.728812] vfs_write+0x23e/0x350
[57159.732624] ksys_write+0x70/0xf0
[57159.736335] __x64_sys_write+0x1a/0x20
[57159.740492] do_syscall_64+0x3b/0x90
[57159.744465] entry_SYSCALL_64_after_hwframe+0x44/0xae
[57159.749908] RIP: 0033:0x7f991e19c387
[57159.753898] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e
fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51
c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[57159.773564] RSP: 002b:00007ffc2ce2d6a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[57159.781550] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f991e19c387
[57159.789133] RDX: 000000000000000c RSI: 000055ee2630e140 RDI: 0000000000000001
[57159.796695] RBP: 000055ee2630e140 R08: 0000000000000000 R09: 00007f991e2324e0
[57159.804246] R10: 00007f991e2323e0 R11: 0000000000000246 R12: 000000000000000c
[57159.811800] R13: 00007f991e26f520 R14: 000000000000000c R15: 00007f991e26f700
[57159.819373] Modules linked in: idxd bridge stp llc bnep sunrpc nls_iso8859_1 intel_
rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_code
c_realtek iTCO_wdt 8250_dw snd_hda_codec_generic kvm_intel ledtrig_audio iTCO_vendor_s
upport snd_hda_intel snd_intel_dspcfg ppdev kvm snd_hda_codec intel_wmi_thunderbolt sn
d_hwdep irqbypass iwlwifi btusb snd_hda_core rapl btrtl intel_cstate snd_seq btbcm snd
_seq_device btintel snd_pcm cfg80211 bluetooth pcspkr psmouse input_leds snd_timer int
el_lpss_pci mei_me intel_lpss snd ecdh_generic ecc mei ucsi_acpi i2c_i801 idma64 i2c_s
mbus virt_dma soundcore typec_ucsi typec wmi parport_pc parport video mac_hid acpi_pad
sch_fq_codel drm ip_tables x_tables crct10dif_pclmul crc32_pclmul ghash_clmulni_intel
usbkbd hid_generic usbmouse aesni_intel usbhid crypto_simd cryptd e1000e hid serio_ra
w ahci libahci pinctrl_sunrisepoint fuse msr autofs4 [last unloaded: idxd]
[57159.904082] CR2: ffffc900011e0090
[57159.907877] ---[ end trace b4e32f49ce9176a4 ]---

Fixes: 49c4959f04b5 ("dmaengine: idxd: fix sequence for pci driver remove() and shutdown()")
Reported-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163225535868.4152687.9318737776682088722.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: change bandwidth token to read buffers

[ Upstream commit 7ed6f1b85fb613e5e44ef3e14d73f2dc96860935 ]

DSA spec v1.2 has changed the term of "bandwidth tokens" to "read buffers"
in or

dmaengine: idxd: change bandwidth token to read buffers

[ Upstream commit 7ed6f1b85fb613e5e44ef3e14d73f2dc96860935 ]

DSA spec v1.2 has changed the term of "bandwidth tokens" to "read buffers"
in order to make the concept clearer. Deprecate bandwidth token
naming in the driver and convert to read buffers in order to match with
the spec and reduce confusion when reading the spec.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951338932.2988321.6162640806935567317.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

dmanegine: idxd: fix resource free ordering on driver removal

[ Upstream commit 98da0106aac0d3c5d4a3c95d238f1ff88957bbfc ]

Fault triggers on ioread32() when pci driver unbind is envoked. The
placem

dmanegine: idxd: fix resource free ordering on driver removal

[ Upstream commit 98da0106aac0d3c5d4a3c95d238f1ff88957bbfc ]

Fault triggers on ioread32() when pci driver unbind is envoked. The
placement of idxd sub-driver removal causes the probing of the device mmio
region after the mmio mapping being torn down. The driver needs the
sub-drivers to be unbound but not release the idxd context until all
shutdown activities has been done. Move the sub-driver unregistering up
before the remove() calls shutdown(). But take a device ref on the
idxd->conf_dev so that the memory does not get freed in ->release(). When
all cleanup activities has been done, release the ref to allow the idxd
memory to be freed.

[57159.542766] RIP: 0010:ioread32+0x27/0x60
[57159.547097] Code: 00 66 90 48 81 ff ff ff 03 00 77 1e 48 81 ff 00 00 01 00 76 05 0f
b7 d7 ed c3 8b 15 03 50 41 01 b8 ff ff ff ff 85 d2 75 04 c3 <8b> 07 c3 55 83 ea 01 48
89 fe 48 c7 c7 00 70 5f 82 48 89 e5 48 83
[57159.566647] RSP: 0018:ffffc900011abb60 EFLAGS: 00010292
[57159.572295] RAX: ffffc900011e0000 RBX: ffff888107d39800 RCX: 0000000000000000
[57159.579842] RDX: 0000000000000000 RSI: ffffffff82b1e448 RDI: ffffc900011e0090
[57159.587421] RBP: ffffc900011abb88 R08: 0000000000000000 R09: 0000000000000001
[57159.594972] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881019840d0
[57159.602533] R13: ffff8881097e9000 R14: ffffffffa08542a0 R15: 00000000000003a8
[57159.610093] FS: 00007f991e0a8740(0000) GS:ffff888459900000(0000) knlGS:00000000000
00000
[57159.618614] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[57159.624814] CR2: ffffc900011e0090 CR3: 000000010862a002 CR4: 00000000003706e0
[57159.632397] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[57159.639973] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[57159.647601] Call Trace:
[57159.650502] ? idxd_device_disable+0x41/0x110 [idxd]
[57159.655948] idxd_device_drv_remove+0x2b/0x80 [idxd]
[57159.661374] idxd_config_bus_remove+0x16/0x20
[57159.666191] __device_release_driver+0x163/0x240
[57159.671320] device_release_driver+0x2b/0x40
[57159.676052] bus_remove_device+0xf5/0x160
[57159.680524] device_del+0x19c/0x400
[57159.684440] device_unregister+0x18/0x60
[57159.688792] idxd_remove+0x140/0x1c0 [idxd]
[57159.693406] pci_device_remove+0x3e/0xb0
[57159.697758] __device_release_driver+0x163/0x240
[57159.702788] device_driver_detach+0x43/0xb0
[57159.707424] unbind_store+0x11e/0x130
[57159.711537] drv_attr_store+0x24/0x30
[57159.715646] sysfs_kf_write+0x4b/0x60
[57159.719710] kernfs_fop_write_iter+0x153/0x1e0
[57159.724563] new_sync_write+0x120/0x1b0
[57159.728812] vfs_write+0x23e/0x350
[57159.732624] ksys_write+0x70/0xf0
[57159.736335] __x64_sys_write+0x1a/0x20
[57159.740492] do_syscall_64+0x3b/0x90
[57159.744465] entry_SYSCALL_64_after_hwframe+0x44/0xae
[57159.749908] RIP: 0033:0x7f991e19c387
[57159.753898] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e
fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51
c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[57159.773564] RSP: 002b:00007ffc2ce2d6a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[57159.781550] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f991e19c387
[57159.789133] RDX: 000000000000000c RSI: 000055ee2630e140 RDI: 0000000000000001
[57159.796695] RBP: 000055ee2630e140 R08: 0000000000000000 R09: 00007f991e2324e0
[57159.804246] R10: 00007f991e2323e0 R11: 0000000000000246 R12: 000000000000000c
[57159.811800] R13: 00007f991e26f520 R14: 000000000000000c R15: 00007f991e26f700
[57159.819373] Modules linked in: idxd bridge stp llc bnep sunrpc nls_iso8859_1 intel_
rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_code
c_realtek iTCO_wdt 8250_dw snd_hda_codec_generic kvm_intel ledtrig_audio iTCO_vendor_s
upport snd_hda_intel snd_intel_dspcfg ppdev kvm snd_hda_codec intel_wmi_thunderbolt sn
d_hwdep irqbypass iwlwifi btusb snd_hda_core rapl btrtl intel_cstate snd_seq btbcm snd
_seq_device btintel snd_pcm cfg80211 bluetooth pcspkr psmouse input_leds snd_timer int
el_lpss_pci mei_me intel_lpss snd ecdh_generic ecc mei ucsi_acpi i2c_i801 idma64 i2c_s
mbus virt_dma soundcore typec_ucsi typec wmi parport_pc parport video mac_hid acpi_pad
sch_fq_codel drm ip_tables x_tables crct10dif_pclmul crc32_pclmul ghash_clmulni_intel
usbkbd hid_generic usbmouse aesni_intel usbhid crypto_simd cryptd e1000e hid serio_ra
w ahci libahci pinctrl_sunrisepoint fuse msr autofs4 [last unloaded: idxd]
[57159.904082] CR2: ffffc900011e0090
[57159.907877] ---[ end trace b4e32f49ce9176a4 ]---

Fixes: 49c4959f04b5 ("dmaengine: idxd: fix sequence for pci driver remove() and shutdown()")
Reported-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163225535868.4152687.9318737776682088722.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

dmaengine: idxd: Set defaults for GRPCFG traffic class

Set GRPCFG traffic class to value of 1 for best performance on current
generation of accelerators. Also add override option to allow experiment

dmaengine: idxd: Set defaults for GRPCFG traffic class

Set GRPCFG traffic class to value of 1 for best performance on current
generation of accelerators. Also add override option to allow experimentation.
Sysfs knobs are disabled for DSA/IAX gen1 devices.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373005.1968485.3761065664382799202.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: move dsa_drv support to compatible mode

The original architecture of /sys/bus/dsa invented a scheme whereby
a single entry in the list of bus drivers, /sys/bus/drivers/dsa,
handled

dmaengine: idxd: move dsa_drv support to compatible mode

The original architecture of /sys/bus/dsa invented a scheme whereby
a single entry in the list of bus drivers, /sys/bus/drivers/dsa,
handled all device types and internally routed them to different
different drivers. Those internal drivers were invisible to
userspace.

With the idxd driver transitioned to a proper bus device-driver model,
the legacy behavior needs to be preserved due to it being exposed to
user space via sysfs. Create a compat driver to provide the legacy
behavior for /sys/bus/dsa/drivers/dsa. This should satisfy user
tool accel-config v3.2 or ealier where this behavior is expected.
If the distro has a newer accel-config then the legacy mode does
not need to be enabled.

When the compat driver binds the device (i.e. dsa0) to the dsa driver,
it will be bound to the new idxd_drv. The wq device (i.e. wq0.0) will
be bound to either the dmaengine_drv or the user_drv. The dsa_drv
becomes a routing mechansim for the new drivers. It will not support
additional external drivers that are implemented later.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637468705.744545.4399080971745974435.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone

In preparation for dsa_drv compat support to be built-in, move the bus
code to its own compilation unit. A follow-on patch adds the

dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone

In preparation for dsa_drv compat support to be built-in, move the bus
code to its own compilation unit. A follow-on patch adds the compat
implementation. Recall that the compat implementation allows for the
deprecated / omnibus dsa_drv binding scheme rather than the idiomatic
organization of a full fledged bus driver per driver type.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637468142.744545.2811632736881720857.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: create user driver for wq 'device'

The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled
all d

dmaengine: idxd: create user driver for wq 'device'

The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled
all device types and internally routed them to different drivers.
Those internal drivers were invisible to userspace. Now, as
/sys/bus/dsa wants to grow support for alternate drivers for a given
device, for example vfio-mdev instead of kernel-internal-dmaengine, a
proper bus device-driver model is needed. The first step in that process
is separating the existing omnibus/implicit "dsa" driver into proper
individual drivers registered on /sys/bus/dsa. Establish the
idxd_user_drv driver that controls the enabling and disabling of the
wq and also register and unregister a char device to allow user space
to mmap the descriptor submission portal.

The cdev related bits are moved to the cdev driver probe/remove and out of
the drv_enabe/disable_wq() calls. These bits are exclusive to the cdev
operation and not part of the generic enable/disable of the wq device.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637467578.744545.10203997610072341376.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: create dmaengine driver for wq 'device'

The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled

dmaengine: idxd: create dmaengine driver for wq 'device'

The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled
all device types and internally routed them to different drivers.
Those internal drivers were invisible to userspace. Now, as
/sys/bus/dsa wants to grow support for alternate drivers for a given
device, for example vfio-mdev instead of kernel-internal-dmaengine, a
proper bus device-driver model is needed. The first step in that process
is separating the existing omnibus/implicit "dsa" driver into proper
individual drivers registered on /sys/bus/dsa. Establish the
idxd_dmaengine_drv driver that controls the enabling and disabling of the
wq and also register and unregister the dma channel.

idxd_wq_alloc_resources() and idxd_wq_free_resources() also get moved to
the dmaengine driver. The resources (dma descriptors allocation and setup)
are only used by the dmaengine driver and should only happen when it loads.

The char dev driver (cdev) related bits are left in the __drv_enable_wq()
and __drv_disable_wq() calls to be moved when we split out the char dev
driver just like how the dmaengine driver is split out.

WQ autoload support is not expected currently. With the amount of
configuration needed for the device, the wq is always expected to
be enabled by a tool (or via sysfs) rather than auto enabled at driver
load.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637467033.744545.12330636655625405394.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: create idxd_device sub-driver

The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled
all device

dmaengine: idxd: create idxd_device sub-driver

The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled
all device types and internally routed them to different drivers.
Those internal drivers were invisible to userspace. Now, as
/sys/bus/dsa wants to grow support for alternate drivers for a given
device, for example vfio-mdev instead of kernel-internal-dmaengine, a
proper bus device-driver model is needed. The first step in that process
is separating the existing omnibus/implicit "dsa" driver into proper
individual drivers registered on /sys/bus/dsa. Establish the idxd_drv
driver that control the enabling and disabling of the accelerator device.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637466439.744545.15210886092627144577.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: add type to driver in order to allow device matching

Add an array of support device types to the idxd_device_driver
definition in order to enable simple matching of device type to a

dmaengine: idxd: add type to driver in order to allow device matching

Add an array of support device types to the idxd_device_driver
definition in order to enable simple matching of device type to a
given driver. The deprecated / omnibus dsa_drv driver specifies
IDXD_DEV_NONE as its only role is to service legacy userspace (old
accel-config) directed bind requests and route them to them the proper
driver. It need not attach to a device when the bus is autoprobed. The
accel-config tooling is being updated to drop its dependency on this
deprecated bind scheme.

Reviewed-by: Dan Willliams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637465882.744545.17456174666211577867.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmanegine: idxd: open code the dsa_drv registration

Don't need a wrapper to register the driver. Just do it directly.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang

dmanegine: idxd: open code the dsa_drv registration

Don't need a wrapper to register the driver. Just do it directly.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637465319.744545.16325178432532362906.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: remove IDXD_DEV_CONF_READY

The IDXD_DEV_CONF_READY state flag is no longer needed. The current
implementation uses this flag to stop the device from doing
configuration until the pc

dmaengine: idxd: remove IDXD_DEV_CONF_READY

The IDXD_DEV_CONF_READY state flag is no longer needed. The current
implementation uses this flag to stop the device from doing
configuration until the pci driver probe has completed. With the
driver architecture going towards multiple sub-driver attached to
the dsa_bus, this is no longer feasible. The sub-drivers will be
allowed to probe and return with failure when they are not ready
to complete the probe rather than using a state flag to gate the
probing.

There is no expectation that the devices auto-attach to a driver.
Userspace configuration is expected to setup the device before
enabling.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637460633.744545.8902095097471365420.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: add 'struct idxd_dev' as wrapper for conf_dev

Add a 'struct idxd_dev' that wraps the 'struct device' for idxd conf_dev
that registers with the dsa bus. This is introduced in order t

dmaengine: idxd: add 'struct idxd_dev' as wrapper for conf_dev

Add a 'struct idxd_dev' that wraps the 'struct device' for idxd conf_dev
that registers with the dsa bus. This is introduced in order to deal with
multiple different types of 'devices' that are registered on the dsa_bus
when the compat driver needs to route them to the correct driver to attach.
The bind() call now can determine the type of device and then do the
appropriate driver matching.

Reviewed-by Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637460065.744545.584492831446090984.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: add driver name

Add name field in idxd_device_driver so we don't have to touch the
'struct device_driver' during declaration.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
S

dmaengine: idxd: add driver name

Add name field in idxd_device_driver so we don't have to touch the
'struct device_driver' during declaration.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637459517.744545.7572915135318813722.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: add driver register helper

Add helper functions for dsa-driver registration similar to other
bus-types. In particular, do not require dsa-drivers to open-code the
bus, owner, and mo

dmaengine: idxd: add driver register helper

Add helper functions for dsa-driver registration similar to other
bus-types. In particular, do not require dsa-drivers to open-code the
bus, owner, and mod_name fields. Let registration and unregistration
operate on the 'struct idxd_device_driver' instead of the raw /
embedded 'struct device_driver'.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637458949.744545.14996726325385482050.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: fix sequence for pci driver remove() and shutdown()

->shutdown() call should only be responsible for quiescing the device.
Currently it is doing PCI device tear down. This causes is

dmaengine: idxd: fix sequence for pci driver remove() and shutdown()

->shutdown() call should only be responsible for quiescing the device.
Currently it is doing PCI device tear down. This causes issue when things
like MMIO mapping is removed while idxd_unregister_devices() will trigger
removal of idxd device sub-driver and still initiates MMIO writes to the
device. Another issue is with the unregistering of idxd 'struct device',
the memory context gets freed. So the teardown calls are accessing freed
memory and can cause kernel oops. Move all the teardown bits that doesn't
belong in shutdown to ->remove() call. Move unregistering of the idxd
conf_dev 'struct device' to after doing all the teardown to free all
the memory that's no longer needed.

Fixes: 47c16ac27d4c ("dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162629983901.395844.17964803190905549615.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: fix sequence for pci driver remove() and shutdown()

->shutdown() call should only be responsible for quiescing the device.
Currently it is doing PCI device tear down. This causes is

dmaengine: idxd: fix sequence for pci driver remove() and shutdown()

->shutdown() call should only be responsible for quiescing the device.
Currently it is doing PCI device tear down. This causes issue when things
like MMIO mapping is removed while idxd_unregister_devices() will trigger
removal of idxd device sub-driver and still initiates MMIO writes to the
device. Another issue is with the unregistering of idxd 'struct device',
the memory context gets freed. So the teardown calls are accessing freed
memory and can cause kernel oops. Move all the teardown bits that doesn't
belong in shutdown to ->remove() call. Move unregistering of the idxd
conf_dev 'struct device' to after doing all the teardown to free all
the memory that's no longer needed.

Fixes: 47c16ac27d4c ("dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162629983901.395844.17964803190905549615.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: fix setup sequence for MSIXPERM table

The MSIX permission table should be programmed BEFORE request_irq()
happens. This prevents any possibility of an interrupt happening before the

dmaengine: idxd: fix setup sequence for MSIXPERM table

The MSIX permission table should be programmed BEFORE request_irq()
happens. This prevents any possibility of an interrupt happening before the
MSIX perm table is setup, however slight.

Fixes: 6df0e6c57dfc ("dmaengine: idxd: clear MSIX permission entry on shutdown")
Sign-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162456741222.1138073.1298447364671237896.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: Simplify code and axe the use of a deprecated API

The wrappers in include/linux/pci-dma-compat.h should go away.

Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equiva

dmaengine: idxd: Simplify code and axe the use of a deprecated API

The wrappers in include/linux/pci-dma-compat.h should go away.

Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent
and less verbose 'dma_set_mask_and_coherent()' call.

Even if the code may look different, it should have exactly the same
run-time behavior.
If pci_set_dma_mask(64) fails and pci_set_dma_mask(32) succeeds, then
pci_set_consistent_dma_mask(64) will also fail.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/70c8a3bc67e41c5fefb526ecd64c5174c1e2dc76.1625720835.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: idxd: Use cpu_feature_enabled()

When testing x86 feature bits, use cpu_feature_enabled() so that
build-disabled features can remain off, regardless of what CPUID says.

Fixes: 8e50d392652

dmaengine: idxd: Use cpu_feature_enabled()

When testing x86 feature bits, use cpu_feature_enabled() so that
build-disabled features can remain off, regardless of what CPUID says.

Fixes: 8e50d392652f ("dmaengine: idxd: Add shared workqueue support")
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-By: Vinod Koul <vkoul@kernel.org>
Cc: <stable@vger.kernel.org>

show more ...

dmaengine: idxd: Add missing cleanup for early error out in probe call

The probe call stack is missing some cleanup when things fail in the
middle. Add the appropriate cleanup routines to make sure

dmaengine: idxd: Add missing cleanup for early error out in probe call

The probe call stack is missing some cleanup when things fail in the
middle. Add the appropriate cleanup routines to make sure we exit
gracefully.

Fixes: a39c7cd0438e ("dmaengine: idxd: removal of pcim managed mmio mapping")
Reported-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162197061707.392656.15760573520817310791.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...