crypto: atmel - switch to SPDX license identifiers

Adopt the SPDX license identifiers to ease license compliance
management.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchi

crypto: atmel - switch to SPDX license identifiers

Adopt the SPDX license identifiers to ease license compliance
management.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: remove redundant type flags from tfm allocation

Some crypto API users allocating a tfm with crypto_alloc_$FOO() are also
specifying the type flags for $FOO, e.g. crypto_alloc_sha

crypto: remove redundant type flags from tfm allocation

Some crypto API users allocating a tfm with crypto_alloc_$FOO() are also
specifying the type flags for $FOO, e.g. crypto_alloc_shash() with
CRYPTO_ALG_TYPE_SHASH. But, that's redundant since the crypto API will
override any specified type flag/mask with the correct ones.

So, remove the unneeded flags.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel - Delete error messages for a failed memory allocation in six functions

Omit extra messages for a memory allocation failure in these functions.

This issue was detected

crypto: atmel - Delete error messages for a failed memory allocation in six functions

Omit extra messages for a memory allocation failure in these functions.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel - remove useless irq init

irq would be set to -1 and then unused, if we failed to get IORESOURCE_MEM.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Si

crypto: atmel - remove useless irq init

irq would be set to -1 and then unused, if we failed to get IORESOURCE_MEM.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel - return appropriate error code

Return -ENODEV when dma_request_slave_channel_compat() fails.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off

crypto: atmel - return appropriate error code

Return -ENODEV when dma_request_slave_channel_compat() fails.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - remove unnecessary static in atmel_sha_remove()

Remove unnecessary static on local variable sha_dd. Such variable
is initialized before being used, on every execution

crypto: atmel-sha - remove unnecessary static in atmel_sha_remove()

Remove unnecessary static on local variable sha_dd. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces the
object file size.

This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci

In the following log you can see a significant difference in the object
file size. This log is the output of the size command, before and after
the code change:

before:
text data bss dec hex filename
30005 10264 128 40397 9dcd drivers/crypto/atmel-sha.o

after:
text data bss dec hex filename
29934 10208 64 40206 9d0e drivers/crypto/atmel-sha.o

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel - only treat EBUSY as transient if backlog

The Atmel SHA driver was treating -EBUSY as indication of queueing
to backlog without checking that backlog is enabled for the re

crypto: atmel - only treat EBUSY as transient if backlog

The Atmel SHA driver was treating -EBUSY as indication of queueing
to backlog without checking that backlog is enabled for the request.

Fix it by checking request flags.

Cc: <stable@vger.kernel.org>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - fix error management in atmel_sha_start()

This patch clarifies and fixes how errors should be handled by
atmel_sha_start().

For update operations, the previo

crypto: atmel-sha - fix error management in atmel_sha_start()

This patch clarifies and fixes how errors should be handled by
atmel_sha_start().

For update operations, the previous code wrongly assumed that
(err != -EINPROGRESS) implies (err == 0). It's wrong because that doesn't
take the error cases (err < 0) into account.

This patch also adds many comments to detail all the possible returned
values and what should be done in each case.

Especially, when an error occurs, since atmel_sha_complete() has already
been called, hence releasing the hardware, atmel_sha_start() must not call
atmel_sha_finish_req() later otherwise atmel_sha_complete() would be
called a second time.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - fix missing "return" instructions

This patch fixes a previous patch: "crypto: atmel-sha - update request
queue management to make it more generic".

Indeed th

crypto: atmel-sha - fix missing "return" instructions

This patch fixes a previous patch: "crypto: atmel-sha - update request
queue management to make it more generic".

Indeed the patch above should have replaced the "return -EINVAL;" lines by
"return atmel_sha_complete(dd, -EINVAL);" but instead replaced them by a
simple call of "atmel_sha_complete(dd, -EINVAL);".
Hence all "return" instructions were missing.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel - fix 64-bit build warnings

When we enable COMPILE_TEST building for the Atmel sha and tdes implementations,
we run into a couple of warnings about incorrect format strings

crypto: atmel - fix 64-bit build warnings

When we enable COMPILE_TEST building for the Atmel sha and tdes implementations,
we run into a couple of warnings about incorrect format strings, e.g.

In file included from include/linux/platform_device.h:14:0,
from drivers/crypto/atmel-sha.c:24:
drivers/crypto/atmel-sha.c: In function 'atmel_sha_xmit_cpu':
drivers/crypto/atmel-sha.c:571:19: error: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Werror=format=]
In file included from include/linux/printk.h:6:0,
from include/linux/kernel.h:13,
from drivers/crypto/atmel-tdes.c:17:
drivers/crypto/atmel-tdes.c: In function 'atmel_tdes_crypt_dma_stop':
include/linux/kern_levels.h:4:18: error: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'size_t {aka long unsigned int}' [-Werror=format=]

These are all fixed by using the "%z" modifier for size_t data.

There are also a few uses of min()/max() with incompatible types:

drivers/crypto/atmel-tdes.c: In function 'atmel_tdes_crypt_start':
drivers/crypto/atmel-tdes.c:528:181: error: comparison of distinct pointer types lacks a cast [-Werror]

Where possible, we should use consistent types here, otherwise we can use
min_t()/max_t() to get well-defined behavior without a warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - add verbose debug facilities to print hw register names

When VERBOSE_DEBUG is defined and SHA_FLAGS_DUMP_REG flag is set in
dd->flags, this patch prints the register

crypto: atmel-sha - add verbose debug facilities to print hw register names

When VERBOSE_DEBUG is defined and SHA_FLAGS_DUMP_REG flag is set in
dd->flags, this patch prints the register names and values when performing
IO accesses.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-authenc - add support to authenc(hmac(shaX), Y(aes)) modes

This patchs allows to combine the AES and SHA hardware accelerators on
some Atmel SoCs. Doing so, AES blocks are

crypto: atmel-authenc - add support to authenc(hmac(shaX), Y(aes)) modes

This patchs allows to combine the AES and SHA hardware accelerators on
some Atmel SoCs. Doing so, AES blocks are only written to/read from the
AES hardware. Those blocks are also transferred from the AES to the SHA
accelerator internally, without additionnal accesses to the system busses.

Hence, the AES and SHA accelerators work in parallel to process all the
data blocks, instead of serializing the process by (de)crypting those
blocks first then authenticating them after like the generic
crypto/authenc.c driver does.

Of course, both the AES and SHA hardware accelerators need to be available
before we can start to process the data blocks. Hence we use their crypto
request queue to synchronize both drivers.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - add support to hmac(shaX)

This patch adds support to the hmac(shaX) algorithms.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Her

crypto: atmel-sha - add support to hmac(shaX)

This patch adds support to the hmac(shaX) algorithms.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - add simple DMA transfers

This patch adds a simple function to perform data transfer with the DMA
controller.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@

crypto: atmel-sha - add simple DMA transfers

This patch adds a simple function to perform data transfer with the DMA
controller.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - add atmel_sha_cpu_start()

This patch adds a simple function to perform data transfer with PIO, hence
handled by the CPU.

Signed-off-by: Cyrille Pitchen <cyri

crypto: atmel-sha - add atmel_sha_cpu_start()

This patch adds a simple function to perform data transfer with PIO, hence
handled by the CPU.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - add atmel_sha_wait_for_data_ready()

This patch simply defines a helper function to test the 'Data Ready' flag
of the Status Register. It also gives a chance for the c

crypto: atmel-sha - add atmel_sha_wait_for_data_ready()

This patch simply defines a helper function to test the 'Data Ready' flag
of the Status Register. It also gives a chance for the crypto request to
be processed synchronously if this 'Data Ready' flag is already set when
polling the Status Register. Indeed, running synchronously avoid the
latency of the 'Data Ready' interrupt.

When the 'Data Ready' flag has not been set yet, we enable the associated
interrupt and resume processing the crypto request asynchronously from the
'done' task just as before.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - redefine SHA_FLAGS_SHA* flags to match SHA_MR_ALGO_SHA*

This patch modifies the SHA_FLAGS_SHA* flags: those algo flags are now
organized as values of a single bitfiel

crypto: atmel-sha - redefine SHA_FLAGS_SHA* flags to match SHA_MR_ALGO_SHA*

This patch modifies the SHA_FLAGS_SHA* flags: those algo flags are now
organized as values of a single bitfield instead of individual bits.
This allows to reduce the number of bits needed to encode all possible
values. Also the new values match the SHA_MR_ALGO_SHA* values hence
the algorithm bitfield of the SHA_MR register could simply be set with:

mr = (mr & ~SHA_FLAGS_ALGO_MASK) | (ctx->flags & SHA_FLAGS_ALGO_MASK)

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - make atmel_sha_done_task more generic

This patch is a transitional patch. It updates atmel_sha_done_task() to
make it more generic. Indeed, it adds a new .resume() me

crypto: atmel-sha - make atmel_sha_done_task more generic

This patch is a transitional patch. It updates atmel_sha_done_task() to
make it more generic. Indeed, it adds a new .resume() member in the
atmel_sha_dev structure. This hook is called from atmel_sha_done_task()
to resume processing an asynchronous request.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - update request queue management to make it more generic

This patch is a transitional patch. It splits the atmel_sha_handle_queue()
function. Now atmel_sha_handle_queu

crypto: atmel-sha - update request queue management to make it more generic

This patch is a transitional patch. It splits the atmel_sha_handle_queue()
function. Now atmel_sha_handle_queue() only manages the request queue and
calls a new .start() hook from the atmel_sha_ctx structure.
This hook allows to implement different kind of requests still handled by
a single queue.

Also when the req parameter of atmel_sha_handle_queue() refers to the very
same request as the one returned by crypto_dequeue_request(), the queue
management now gives a chance to this crypto request to be handled
synchronously, hence reducing latencies. The .start() hook returns 0 if
the crypto request was handled synchronously and -EINPROGRESS if the
crypto request still need to be handled asynchronously.

Besides, the new .is_async member of the atmel_sha_dev structure helps
tagging this asynchronous state. Indeed, the req->base.complete() callback
should not be called if the crypto request is handled synchronously.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - create function to get an Atmel SHA device

This is a transitional patch: it creates the atmel_sha_find_dev() function,
which will be used in further patches to share

crypto: atmel-sha - create function to get an Atmel SHA device

This is a transitional patch: it creates the atmel_sha_find_dev() function,
which will be used in further patches to share the source code responsible
for finding a Atmel SHA device.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.6:

API:
-

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.6:

API:
- Convert remaining crypto_hash users to shash or ahash, also convert
blkcipher/ablkcipher users to skcipher.
- Remove crypto_hash interface.
- Remove crypto_pcomp interface.
- Add crypto engine for async cipher drivers.
- Add akcipher documentation.
- Add skcipher documentation.

Algorithms:
- Rename crypto/crc32 to avoid name clash with lib/crc32.
- Fix bug in keywrap where we zero the wrong pointer.

Drivers:
- Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver.
- Add PIC32 hwrng driver.
- Support BCM6368 in bcm63xx hwrng driver.
- Pack structs for 32-bit compat users in qat.
- Use crypto engine in omap-aes.
- Add support for sama5d2x SoCs in atmel-sha.
- Make atmel-sha available again.
- Make sahara hashing available again.
- Make ccp hashing available again.
- Make sha1-mb available again.
- Add support for multiple devices in ccp.
- Improve DMA performance in caam.
- Add hashing support to rockchip"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: qat - remove redundant arbiter configuration
crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
crypto: qat - Change the definition of icp_qat_uof_regtype
hwrng: exynos - use __maybe_unused to hide pm functions
crypto: ccp - Add abstraction for device-specific calls
crypto: ccp - CCP versioning support
crypto: ccp - Support for multiple CCPs
crypto: ccp - Remove check for x86 family and model
crypto: ccp - memset request context to zero during import
lib/mpi: use "static inline" instead of "extern inline"
lib/mpi: avoid assembler warning
hwrng: bcm63xx - fix non device tree compatibility
crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode.
crypto: qat - The AE id should be less than the maximal AE number
lib/mpi: Endianness fix
crypto: rockchip - add hash support for crypto engine in rk3288
crypto: xts - fix compile errors
crypto: doc - add skcipher API documentation
crypto: doc - update AEAD AD handling
...

show more ...

crypto: atmel - fix checks of error code returned by devm_ioremap_resource()

The change fixes potential oops while accessing iomem on invalid
address, if devm_ioremap_resource() fails du

crypto: atmel - fix checks of error code returned by devm_ioremap_resource()

The change fixes potential oops while accessing iomem on invalid
address, if devm_ioremap_resource() fails due to some reason.

The devm_ioremap_resource() function returns ERR_PTR() and never
returns NULL, which makes useless a following check for NULL.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Fixes: b0e8b3417a62 ("crypto: atmel - use devm_xxx() managed function")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - fix race in atmel_sha_final()

When (!ctx->bufcnt && !(ctx->flags & SHA_FLAGS_PAD)), the former source
code used to set the SHA_FLAGS_BUSY without checking whether thi

crypto: atmel-sha - fix race in atmel_sha_final()

When (!ctx->bufcnt && !(ctx->flags & SHA_FLAGS_PAD)), the former source
code used to set the SHA_FLAGS_BUSY without checking whether this flag was
already set. If so, the hardware is already processing another hash
request so the processing of the req argument of atmel_sha_final() should
be delayed by queueing this request, the same way as done for the
(ctx->bufcnt != 0) case.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - fix .import()/.export() implementation

Using only the digest, digcnt[], bufcnt and buffer[] fields of the
struct atmel_sha_reqctx was not enough to import/export the

crypto: atmel-sha - fix .import()/.export() implementation

Using only the digest, digcnt[], bufcnt and buffer[] fields of the
struct atmel_sha_reqctx was not enough to import/export the request state,
so now we use the whole structure.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

crypto: atmel-sha - remove calls of clk_prepare() from atomic contexts

clk_prepare()/clk_unprepare() must not be called within atomic context.

This patch calls clk_prepare() once fo

crypto: atmel-sha - remove calls of clk_prepare() from atomic contexts

clk_prepare()/clk_unprepare() must not be called within atomic context.

This patch calls clk_prepare() once for all from atmel_sha_probe() and
clk_unprepare() from atmel_sha_remove().

Then calls of clk_prepare_enable()/clk_disable_unprepare() were replaced
by calls of clk_enable()/clk_disable().

Cc: stable@vger.kernel.org
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Reported-by: Matthias Mayr <matthias.mayr@student.kit.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...