clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static

The sparse tool complains as follows:

drivers/clk/qcom/clk-cpu-8996.c:341:19: warning:
symbol 'cpu_msm8996_clks' was n

clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static

The sparse tool complains as follows:

drivers/clk/qcom/clk-cpu-8996.c:341:19: warning:
symbol 'cpu_msm8996_clks' was not declared. Should it be static?

This variable is not used outside of clk-cpu-8996.c, so this commit
marks it static.

Fixes: 03e342dc45c9 ("clk: qcom: Add CPU clock driver for msm8996")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200714142155.35085-1-weiyongjun1@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: qcom: Add CPU clock driver for msm8996

Each of the CPU clusters (Power and Perf) on msm8996 are
clocked via 2 PLLs, a primary and alternate. There are also
2 Mux'es, a primary a

clk: qcom: Add CPU clock driver for msm8996

Each of the CPU clusters (Power and Perf) on msm8996 are
clocked via 2 PLLs, a primary and alternate. There are also
2 Mux'es, a primary and secondary all connected together
as shown below

+-------+
XO | |
+------------------>0 |
| |
PLL/2 | SMUX +----+
+------->1 | |
| | | |
| +-------+ | +-------+
| +---->0 |
| | |
+---------------+ | +----------->1 | CPU clk
|Primary PLL +----+ PLL_EARLY | | +------>
| +------+-----------+ +------>2 PMUX |
+---------------+ | | | |
| +------+ | +-->3 |
+--^+ ACD +-----+ | +-------+
+---------------+ +------+ |
|Alt PLL | |
| +---------------------------+
+---------------+ PLL_EARLY

The primary PLL is what drives the CPU clk, except for times
when we are reprogramming the PLL itself (for rate changes) when
we temporarily switch to an alternate PLL. A subsequent patch adds
support to switch between primary and alternate PLL during rate
changes.

The primary PLL operates on a single VCO range, between 600MHz
and 3GHz. However the CPUs do support OPPs with frequencies
between 300MHz and 600MHz. In order to support running the CPUs
at those frequencies we end up having to lock the PLL at twice
the rate and drive the CPU clk via the PLL/2 output and SMUX.

So for frequencies above 600MHz we follow the following path
Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk
and for frequencies between 300MHz and 600MHz we follow
Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk

ACD stands for Adaptive Clock Distribution and is used to
detect voltage droops.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Ilia Lin: - reworked clock registering
- Added clock-tree diagram
- non-builtin support
- clock notifier on rate change
- https://lkml.org/lkml/2018/5/24/123

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Loic Poulain: - fixed driver remove / clk deregistering
- Removed useless memory barriers
- devm usage when possible
- Fixed Kconfig depends

Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...