#
5367601b |
| 09-Dec-2019 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
drivers/base: base.h: add proper copyright and header info base.h didn't have any copyright information in it, so update it with the correct information. Cc: "Rafael J. Wysocki"
drivers/base: base.h: add proper copyright and header info base.h didn't have any copyright information in it, so update it with the correct information. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/20191209193303.1694546-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2 |
|
#
c2fa1e1b |
| 16-Jul-2019 |
Joel Fernandes (Google) <joel@joelfernandes.org> |
driver/core: Convert to use built-in RCU list checking This commit applies the consolidated hlist_for_each_entry_rcu() support for lockdep conditions. Acked-by: Greg Kroah-Hartm
driver/core: Convert to use built-in RCU list checking This commit applies the consolidated hlist_for_each_entry_rcu() support for lockdep conditions. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
show more ...
|
Revision tags: v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17 |
|
#
ef0ff683 |
| 22-Jan-2019 |
Alexander Duyck <alexander.h.duyck@linux.intel.com> |
driver core: Probe devices asynchronously instead of the driver Probe devices asynchronously instead of the driver. This results in us seeing the same behavior if the device is registere
driver core: Probe devices asynchronously instead of the driver Probe devices asynchronously instead of the driver. This results in us seeing the same behavior if the device is registered before the driver or after. This way we can avoid serializing the initialization should the driver not be loaded until after the devices have already been added. The motivation behind this is that if we have a set of devices that take a significant amount of time to load we can greatly reduce the time to load by processing them in parallel instead of one at a time. In addition, each device can exist on a different node so placing a single thread on one CPU to initialize all of the devices for a given driver can result in poor performance on a system with multiple nodes. This approach can reduce the time needed to scan SCSI LUNs significantly. The only way to realize that speedup is by enabling more concurrency which is what is achieved with this patch. To achieve this it was necessary to add a new member "async_driver" to the device_private structure to store the driver pointer while we wait on the deferred probe call. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
ed88747c |
| 22-Jan-2019 |
Alexander Duyck <alexander.h.duyck@linux.intel.com> |
device core: Consolidate locking and unlocking of parent and device Try to consolidate all of the locking and unlocking of both the parent and device when attaching or removing a driver
device core: Consolidate locking and unlocking of parent and device Try to consolidate all of the locking and unlocking of both the parent and device when attaching or removing a driver from a given device. To do that I first consolidated the lock pattern into two functions __device_driver_lock and __device_driver_unlock. After doing that I then created functions specific to attaching and detaching the driver while acquiring these locks. By doing this I was able to reduce the number of spots where we touch need_parent_lock from 12 down to 4. This patch should produce no functional changes, it is meant to be a code clean-up/consolidation only. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
3451a495 |
| 22-Jan-2019 |
Alexander Duyck <alexander.h.duyck@linux.intel.com> |
driver core: Establish order of operations for device_add and device_del via bitflag Add an additional bit flag to the device_private struct named "dead". This additional flag provi
driver core: Establish order of operations for device_add and device_del via bitflag Add an additional bit flag to the device_private struct named "dead". This additional flag provides a guarantee that when a device_del is executed on a given interface an async worker will not attempt to attach the driver following the earlier device_del call. Previously this guarantee was not present and could result in the device_del call attempting to remove a driver from an interface only to have the async worker attempt to probe the driver later when it finally completes the asynchronous probe call. One additional change added was that I pulled the check for dev->driver out of the __device_attach_driver call and instead placed it in the __device_attach_async_helper call. This was motivated by the fact that the only other caller of this, __device_attach, had already taken the device_lock() and checked for dev->driver. Instead of testing for this twice in this path it makes more sense to just consolidate the dev->dead and dev->driver checks together into one set of checks. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
570d0200 |
| 17-Jan-2019 |
Wei Yang <richardw.yang@linux.intel.com> |
driver core: move device->knode_class to device_private As the description of struct device_private says, it stores data which is private to driver core. And it already has similar field
driver core: move device->knode_class to device_private As the description of struct device_private says, it stores data which is private to driver core. And it already has similar fields like: knode_parent, knode_driver, knode_driver and knode_bus. This look it is more proper to put knode_class together with those fields to make it private to driver core. This patch move device->knode_class to device_private to make it comply with code convention. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7 |
|
#
46d3a037 |
| 15-Jul-2018 |
Shaokun Zhang <zhangshaokun@hisilicon.com> |
driver core: remove unnecessary function extern declare device_private_init is called only in core.c, extern declare is unnecessary and make it static. Cc: Greg Kroah-Hartman <g
driver core: remove unnecessary function extern declare device_private_init is called only in core.c, extern declare is unnecessary and make it static. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
494fd7b7 |
| 10-Apr-2018 |
Feng Kan <fkan@apm.com> |
PM / core: fix deferred probe breaking suspend resume order When bridge and its endpoint is enumerated the devices are added to the dpm list. Afterward, the bridge defers probe when IOMM
PM / core: fix deferred probe breaking suspend resume order When bridge and its endpoint is enumerated the devices are added to the dpm list. Afterward, the bridge defers probe when IOMMU is not ready. This causes the bridge to be moved to the end of the dpm list when deferred probe kicks in. The order of the dpm list for bridge and endpoint is reversed. Add reordering code to move the bridge and its children and consumers to the end of the pm list so the order for suspend and resume is not altered. The code also move device and its children and consumers to the tail of device_kset list if it is registered. Signed-off-by: Toan Le <toanle@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
show more ...
|
Revision tags: v4.16, v4.15, v4.13.16, v4.14 |
|
#
b2441318 |
| 01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.13.5, v4.13 |
|
#
a7670d42 |
| 19-Jul-2017 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
driver core: make device_{add|remove}_groups() public Many drivers create additional driver-specific device attributes when binding to the device. To avoid them calling SYSFS API directl
driver core: make device_{add|remove}_groups() public Many drivers create additional driver-specific device attributes when binding to the device. To avoid them calling SYSFS API directly, let's export these helpers. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10 |
|
#
c7334ce8 |
| 14-Jan-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Revert "driver core: Add deferred_probe attribute to devices in sysfs" This reverts commit 6751667a29d6fd64afb9ce30567ad616b68ed789. Rob Herring objected to it, and a replacement fo
Revert "driver core: Add deferred_probe attribute to devices in sysfs" This reverts commit 6751667a29d6fd64afb9ce30567ad616b68ed789. Rob Herring objected to it, and a replacement for it will be added using debugfs in the future. Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1 |
|
#
6751667a |
| 16-Aug-2016 |
Ben Hutchings <ben.hutchings@codethink.co.uk> |
driver core: Add deferred_probe attribute to devices in sysfs It is sometimes useful to know that a device is on the deferred probe list rather than, say, not having a driver available.
driver core: Add deferred_probe attribute to devices in sysfs It is sometimes useful to know that a device is on the deferred probe list rather than, say, not having a driver available. Expose this information to user-space. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
9ed98953 |
| 30-Oct-2016 |
Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
driver core: Functional dependencies tracking support Currently, there is a problem with taking functional dependencies between devices into account. What I mean by a "functiona
driver core: Functional dependencies tracking support Currently, there is a problem with taking functional dependencies between devices into account. What I mean by a "functional dependency" is when the driver of device B needs device A to be functional and (generally) its driver to be present in order to work properly. This has certain consequences for power management (suspend/resume and runtime PM ordering) and shutdown ordering of these devices. In general, it also implies that the driver of A needs to be working for B to be probed successfully and it cannot be unbound from the device before the B's driver. Support for representing those functional dependencies between devices is added here to allow the driver core to track them and act on them in certain cases where applicable. The argument for doing that in the driver core is that there are quite a few distinct use cases involving device dependencies, they are relatively hard to get right in a driver (if one wants to address all of them properly) and it only gets worse if multiplied by the number of drivers potentially needing to do it. Morever, at least one case (asynchronous system suspend/resume) cannot be handled in a single driver at all, because it requires the driver of A to wait for B to suspend (during system suspend) and the driver of B to wait for A to resume (during system resume). For this reason, represent dependencies between devices as "links", with the help of struct device_link objects each containing pointers to the "linked" devices, a list node for each of them, status information, flags, and an RCU head for synchronization. Also add two new list heads, representing the lists of links to the devices that depend on the given one (consumers) and to the devices depended on by it (suppliers), and a "driver presence status" field (needed for figuring out initial states of device links) to struct device. The entire data structure consisting of all of the lists of link objects for all devices is protected by a mutex (for link object addition/removal and for list walks during device driver probing and removal) and by SRCU (for list walking in other case that will be introduced by subsequent change sets). If CONFIG_SRCU is not selected, however, an rwsem is used for protecting the entire data structure. In addition, each link object has an internal status field whose value reflects whether or not drivers are bound to the devices pointed to by the link or probing/removal of their drivers is in progress etc. That field is only modified under the device links mutex, but it may be read outside of it in some cases (introduced by subsequent change sets), so modifications of it are annotated with WRITE_ONCE(). New links are added by calling device_link_add() which takes three arguments: pointers to the devices in question and flags. In particular, if DL_FLAG_STATELESS is set in the flags, the link status is not to be taken into account for this link and the driver core will not manage it. In turn, if DL_FLAG_AUTOREMOVE is set in the flags, the driver core will remove the link automatically when the consumer device driver unbinds from it. One of the actions carried out by device_link_add() is to reorder the lists used for device shutdown and system suspend/resume to put the consumer device along with all of its children and all of its consumers (and so on, recursively) to the ends of those lists in order to ensure the right ordering between all of the supplier and consumer devices. For this reason, it is not possible to create a link between two devices if the would-be supplier device already depends on the would-be consumer device as either a direct descendant of it or a consumer of one of its direct descendants or one of its consumers and so on. There are two types of link objects, persistent and non-persistent. The persistent ones stay around until one of the target devices is deleted, while the non-persistent ones are removed automatically when the consumer driver unbinds from its device (ie. they are assumed to be valid only as long as the consumer device has a driver bound to it). Persistent links are created by default and non-persistent links are created when the DL_FLAG_AUTOREMOVE flag is passed to device_link_add(). Both persistent and non-persistent device links can be deleted with an explicit call to device_link_del(). Links created without the DL_FLAG_STATELESS flag set are managed by the driver core using a simple state machine. There are 5 states each link can be in: DORMANT (unused), AVAILABLE (the supplier driver is present and functional), CONSUMER_PROBE (the consumer driver is probing), ACTIVE (both supplier and consumer drivers are present and functional), and SUPPLIER_UNBIND (the supplier driver is unbinding). The driver core updates the link state automatically depending on what happens to the linked devices and for each link state specific actions are taken in addition to that. For example, if the supplier driver unbinds from its device, the driver core will also unbind the drivers of all of its consumers automatically under the assumption that they cannot function properly without the supplier. Analogously, the driver core will only allow the consumer driver to bind to its device if the supplier driver is present and functional (ie. the link is in the AVAILABLE state). If that's not the case, it will rely on the existing deferred probing mechanism to wait for the supplier driver to become available. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1 |
|
#
013c074f |
| 10-Nov-2015 |
Strashko, Grygorii <grygorii.strashko@ti.com> |
PM / sleep: prohibit devices probing during suspend/hibernation It is unsafe [1] if probing of devices will happen during suspend or hibernation and system behavior will be unpredictable
PM / sleep: prohibit devices probing during suspend/hibernation It is unsafe [1] if probing of devices will happen during suspend or hibernation and system behavior will be unpredictable in this case. So, let's prohibit device's probing in dpm_prepare() and defer their probing instead. The normal behavior will be restored in dpm_complete(). This patch introduces new DD core APIs: device_block_probing() It will disable probing of devices and defer their probes instead. device_unblock_probing() It will restore normal behavior and trigger re-probing of deferred devices. [1] https://lkml.org/lkml/2015/9/11/554 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
show more ...
|
Revision tags: openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5 |
|
#
52cdbdd4 |
| 27-Jul-2015 |
Grygorii Strashko <grygorii.strashko@ti.com> |
driver core: correct device's shutdown order Now device's shutdown sequence is performed in reverse order of their registration in devices_kset list and this sequence corresponds to the
driver core: correct device's shutdown order Now device's shutdown sequence is performed in reverse order of their registration in devices_kset list and this sequence corresponds to the reverse device's creation order. So, devices_kset data tracks "parent<-child" device's dependencies only. Unfortunately, that's not enough and causes problems in case of implementing board's specific shutdown procedures. For example [1]: "DRA7XX_evm uses PCF8575 and one of the PCF output lines feeds to MMC/SD and this line should be driven high in order for the MMC/SD to be detected. This line is modelled as regulator and the hsmmc driver takes care of enabling and disabling it. In the case of 'reboot', during shutdown path as part of it's cleanup process the hsmmc driver disables this regulator. This makes MMC boot not functional." To handle this issue the .shutdown() callback could be implemented for PCF8575 device where corresponding GPIO pins will be configured to states, required for correct warm/cold reset. This can be achieved only when all .shutdown() callbacks have been called already for all PCF8575's consumers. But devices_kset is not filled correctly now: devices_kset: Device61 4e000000.dmm devices_kset: Device62 48070000.i2c devices_kset: Device63 48072000.i2c devices_kset: Device64 48060000.i2c devices_kset: Device65 4809c000.mmc ... devices_kset: Device102 fixedregulator-sd ... devices_kset: Device181 0-0020 // PCF8575 devices_kset: Device182 gpiochip496 devices_kset: Device183 0-0021 // PCF8575 devices_kset: Device184 gpiochip480 As can be seen from above .shutdown() callback for PCF8575 will be called before its consumers, which, in turn means, that any changes of PCF8575 GPIO's pins will be or unsafe or overwritten later by GPIO's consumers. The problem can be solved if devices_kset list will be filled not only according device creation order, but also according device's probing order to track "supplier<-consumer" dependencies also. Hence, as a fix, lets add devices_kset_move_last(), devices_kset_move_before(), devices_kset_move_after() and call them from device_move() and also add call of devices_kset_move_last() in really_probe(). After this change all entries in devices_kset will be sorted according to device's creation ("parent<-child") and probing ("supplier<-consumer") order. devices_kset after: devices_kset: Device121 48070000.i2c devices_kset: Device122 i2c-0 ... devices_kset: Device147 regulator.24 devices_kset: Device148 0-0020 devices_kset: Device149 gpiochip496 devices_kset: Device150 0-0021 devices_kset: Device151 gpiochip480 devices_kset: Device152 0-0019 ... devices_kset: Device372 fixedregulator-sd devices_kset: Device373 regulator.29 devices_kset: Device374 4809c000.mmc devices_kset: Device375 mmc0 [1] http://www.spinics.net/lists/linux-mmc/msg29825.html Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1 |
|
#
82b2c3c5 |
| 29-Jun-2015 |
Tomeu Vizoso <tomeu.vizoso@collabora.com> |
driver core: fix docbook for device_private.device This field refers to the public device struct, not to classes. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed
driver core: fix docbook for device_private.device This field refers to the public device struct, not to classes. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7 |
|
#
765230b5 |
| 30-Mar-2015 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
driver-core: add asynchronous probing support for drivers Some devices take a long time when initializing, and not all drivers are suited to initialize their devices when they are open.
driver-core: add asynchronous probing support for drivers Some devices take a long time when initializing, and not all drivers are suited to initialize their devices when they are open. For example, input drivers need to interrogate their devices in order to publish device's capabilities before userspace will open them. When such drivers are compiled into kernel they may stall entire kernel initialization. This change allows drivers request for their probe functions to be called asynchronously during driver and device registration (manual binding is still synchronous). Because async_schedule is used to perform asynchronous calls module loading will still wait for the probing to complete. Note that the end goal is to make the probing asynchronous by default, so annotating drivers with PROBE_PREFER_ASYNCHRONOUS is a temporary measure that allows us to speed up boot process while we validating and fixing the rest of the drivers and preparing userspace. This change is based on earlier patch by "Luis R. Rodriguez" <mcgrof@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2 |
|
#
1bb6c08a |
| 14-Apr-2014 |
Jean Delvare <jdelvare@suse.de> |
driver core: Move driver_data back to struct device Having to allocate memory as part of dev_set_drvdata() is a problem because that memory may never get freed if the device itself is no
driver core: Move driver_data back to struct device Having to allocate memory as part of dev_set_drvdata() is a problem because that memory may never get freed if the device itself is not created. So move driver_data back to struct device. This is a partial revert of commit b4028437. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6 |
|
#
caa73ea1 |
| 29-Dec-2013 |
Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
ACPI / hotplug / driver core: Handle containers in a special way ACPI container devices require special hotplug handling, at least on some systems, since generally user space needs to ca
ACPI / hotplug / driver core: Handle containers in a special way ACPI container devices require special hotplug handling, at least on some systems, since generally user space needs to carry out system-specific cleanup before it makes sense to offline devices in the container. However, the current ACPI hotplug code for containers first attempts to offline devices in the container and only then it notifies user space of the container offline. Moreover, after commit 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace), ACPI device objects representing containers are present as long as the ACPI namespace nodes corresponding to them are present, which may be forever, even if the container devices are physically detached from the system (the return values of the corresponding _STA methods change in those cases, but generally the namespace nodes themselves are still there). Thus it is useful to introduce entities representing containers that will go away during container hot-unplug. The goal of this change is to address both the above issues. The idea is to create a "companion" container system device for each of the ACPI container device objects during the initial namespace scan or on a hotplug event making the container present. That system device will be unregistered on container removal. A new bus type for container devices is added for this purpose, because device offline and online operations need to be defined for them. The online operation is a trivial function that is always successful and the offline uses a callback pointed to by the container device's offline member. For ACPI containers that callback simply walks the list of ACPI device objects right below the container object (its children) and checks if all of their physical companion devices are offline. If that's not the case, it returns -EBUSY and the container system devivce cannot be put offline. Consequently, to put the container system device offline, it is necessary to put all of the physical devices depending on its ACPI companion object offline beforehand. Container system devices created for ACPI container objects are initially online. They are created by the container ACPI scan handler whose hotplug.demand_offline flag is set. That causes acpi_scan_hot_remove() to check if the companion container system device is offline before attempting to remove an ACPI container or any devices below it. If the check fails, a KOBJ_CHANGE uevent is emitted for the container system device in question and user space is expected to offline all devices below the container and the container itself in response to it. Then, user space can finalize the removal of the container with the help of its ACPI device object's eject attribute in sysfs. Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5 |
|
#
ed0617b5 |
| 08-Aug-2013 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
driver core: bus_type: add drv_groups attribute groups are much more flexible than just a list of attributes, due to their support for visibility of the attributes, and binary attrib
driver core: bus_type: add drv_groups attribute groups are much more flexible than just a list of attributes, due to their support for visibility of the attributes, and binary attributes. Add drv_groups to struct bus_type which should be used instead of drv_attrs. drv_attrs will be removed from the structure soon. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
fa6fdb33 |
| 08-Aug-2013 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
driver core: bus_type: add dev_groups attribute groups are much more flexible than just a list of attributes, due to their support for visibility of the attributes, and binary attrib
driver core: bus_type: add dev_groups attribute groups are much more flexible than just a list of attributes, due to their support for visibility of the attributes, and binary attributes. Add dev_groups to struct bus_type which should be used instead of dev_attrs. dev_attrs will be removed from the structure soon. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3 |
|
#
d73ce004 |
| 12-Mar-2013 |
Tejun Heo <tj@kernel.org> |
driver/base: implement subsys_virtual_register() Kay tells me the most appropriate place to expose workqueues to userland would be /sys/devices/virtual/workqueues/WQ_NAME which is sy
driver/base: implement subsys_virtual_register() Kay tells me the most appropriate place to expose workqueues to userland would be /sys/devices/virtual/workqueues/WQ_NAME which is symlinked to /sys/bus/workqueue/devices/WQ_NAME and that we're lacking a way to do that outside of driver core as virtual_device_parent() isn't exported and there's no inteface to conveniently create a virtual subsystem. This patch implements subsys_virtual_register() by factoring out subsys_register() from subsys_system_register() and using it with virtual_device_parent() as the origin directory. It's identical to subsys_system_register() other than the origin directory but we aren't gonna restrict the device names which should be used under it. This will be used to expose workqueue attributes to userland. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kay Sievers <kay.sievers@vrfy.org>
show more ...
|
Revision tags: v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7 |
|
#
ef8a3fd6 |
| 08-Mar-2012 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
driver core: move the deferred probe pointer into the private area Nothing outside of the driver core needs to get to the deferred probe pointer, so move it inside the private area of 's
driver core: move the deferred probe pointer into the private area Nothing outside of the driver core needs to get to the deferred probe pointer, so move it inside the private area of 'struct device' so no one tries to mess around with it. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
d1c3414c |
| 05-Mar-2012 |
Grant Likely <grant.likely@secretlab.ca> |
drivercore: Add driver probe deferral mechanism Allow drivers to report at probe time that they cannot get all the resources required by the device, and should be retried at a later time
drivercore: Add driver probe deferral mechanism Allow drivers to report at probe time that they cannot get all the resources required by the device, and should be retried at a later time. This should completely solve the problem of getting devices initialized in the right order. Right now this is mostly handled by mucking about with initcall ordering which is a complete hack, and doesn't even remotely handle the case where device drivers are in modules. This approach completely sidesteps the issues by allowing driver registration to occur in any order, and any driver can request to be retried after a few more other drivers get probed. v4: - Integrate Manjunath's addition of a separate workqueue - Change -EAGAIN to -EPROBE_DEFER for drivers to trigger deferral - Update comment blocks to reflect how the code really works v3: - Hold off workqueue scheduling until late_initcall so that the bulk of driver probes are complete before we start retrying deferred devices. - Tested with simple use cases. Still needs more testing though. Using it to get rid of the gpio early_initcall madness, or to replace the ASoC internal probe deferral code would be ideal. v2: - added locking so it should no longer be utterly broken in that regard - remove device from deferred list at device_del time. - Still completely untested with any real use case, but has been boot tested. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dilan Lee <dilee@nvidia.com> Cc: Manjunath GKondaiah <manjunath.gkondaiah@linaro.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Tony Lindgren <tony@atomide.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1 |
|
#
024f7846 |
| 09-Jan-2012 |
Ben Hutchings <ben@decadent.org.uk> |
cpu: Do not return errors from cpu_dev_init() which will be ignored cpu_dev_init() is only called from driver_init(), which does not check its return value. Therefore make cpu_dev_init(
cpu: Do not return errors from cpu_dev_init() which will be ignored cpu_dev_init() is only called from driver_init(), which does not check its return value. Therefore make cpu_dev_init() return void. We must register the CPU subsystem, so panic if this fails. If sched_create_sysfs_power_savings_entries() fails, the damage is contained, so ignore this (as before). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|