sparc64: Implement HAVE_CONTEXT_TRACKING

Mark the places when the system are in user or are in kernel.
This is used to make full dynticks system (tickless) --
CONFIG_NO_HZ_FULL dependence.

Signed-o

sparc64: Implement HAVE_CONTEXT_TRACKING

Mark the places when the system are in user or are in kernel.
This is used to make full dynticks system (tickless) --
CONFIG_NO_HZ_FULL dependence.

Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

sparc: convert to ksignal

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sparc: switch to generic old sigsuspend

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sparc: bury the sys_sigpause() remains

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sparc: switch to generic sigaltstack

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sparc64: not any error from do_sigaltstack() should fail rt_sigreturn()

If a signal handler is executed on altstack and another signal comes,
we will end up with rt_sigreturn() on return from the se

sparc64: not any error from do_sigaltstack() should fail rt_sigreturn()

If a signal handler is executed on altstack and another signal comes,
we will end up with rt_sigreturn() on return from the second handler
getting -EPERM from do_sigaltstack(). It's perfectly OK, since we
are not asking to change the settings; in fact, they couldn't have been
changed during the second handler execution exactly because we'd been
on altstack all along. 64bit sigreturn on sparc treats any error from
do_sigaltstack() as "SIGSEGV now"; we need to switch to the same semantics
we are using on other architectures.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

new helper: signal_delivered()

Does block_sigmask() + tracehook_signal_handler(); called when
sigframe has been successfully built. All architectures converted
to it; block_sigmask() itself is gon

new helper: signal_delivered()

Does block_sigmask() + tracehook_signal_handler(); called when
sigframe has been successfully built. All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).

I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set

Only 3 out of 63 do not. Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will ex

most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set

Only 3 out of 63 do not. Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will exclude unblockable signals, switched
open-coded instances to it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

pull clearing RESTORE_SIGMASK into block_sigmask()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

new helper: sigmask_to_save()

replace boilerplate "should we use ->saved_sigmask or ->blocked?"
with calls of obvious inlined helper...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

new helper: restore_saved_sigmask()

first fruits of ..._restore_sigmask() helpers: now we can take
boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK
and restore the blocked mask from

new helper: restore_saved_sigmask()

first fruits of ..._restore_sigmask() helpers: now we can take
boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK
and restore the blocked mask from ->saved_mask" into a common
helper. Open-coded instances switched...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

move key_repace_session_keyring() into tracehook_notify_resume()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

new helper: sigsuspend()

guts of saved_sigmask-based sigsuspend/rt_sigsuspend. Takes
kernel sigset_t *.

Open-coded instances replaced with calling it.

Signed-off-by: Al Viro <viro@zeniv.linux.org

new helper: sigsuspend()

guts of saved_sigmask-based sigsuspend/rt_sigsuspend. Takes
kernel sigset_t *.

Open-coded instances replaced with calling it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

Disintegrate asm/system.h for Sparc

Disintegrate asm/system.h for Sparc.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: sparclinux@vger.kernel.org

sparc: use block_sigmask()

Use the new helper function introduced in commit 5e6292c0f28f ("signal:
add block_sigmask() for adding sigmask to current->blocked") which
centralises the code for updatin

sparc: use block_sigmask()

Use the new helper function introduced in commit 5e6292c0f28f ("signal:
add block_sigmask() for adding sigmask to current->blocked") which
centralises the code for updating current->blocked after successfully
delivering a signal and reduces the amount of duplicate code across
architectures. In the past some architectures got this code wrong, so
using this helper function should stop that from happening again.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

sparc: Stash orig_i0 into %g6 instead of %g2

As per the comments added by this commit, %g2 turns out to not be a
usable place to save away orig_i0 for syscall restart handling.

In fact all of %g2,

sparc: Stash orig_i0 into %g6 instead of %g2

As per the comments added by this commit, %g2 turns out to not be a
usable place to save away orig_i0 for syscall restart handling.

In fact all of %g2, %g3, %g4, and %g5 are assumed to be saved across
a system call by various bits of code in glibc.

%g1 can't be used because that holds the syscall number, which would
need to be saved and restored for syscall restart handling too, and
that would only compound our problems :-)

This leaves us with %g6 and %g7 which are for "system use". %g7 is
used as the "thread register" by glibc, but %g6 is used as a compiler
and assembler temporary scratch register. And in no instance is %g6
used to hold a value across a system call.

Therefore %g6 is safe for storing away orig_i0, at least for now.

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

sparc: Fix handling of orig_i0 wrt. debugging when restarting syscalls.

Although we provide a proper way for a debugger to control whether
syscall restart occurs, we run into problems because orig_i

sparc: Fix handling of orig_i0 wrt. debugging when restarting syscalls.

Although we provide a proper way for a debugger to control whether
syscall restart occurs, we run into problems because orig_i0 is not
saved and restored properly.

Luckily we can solve this problem without having to make debuggers
aware of the issue. Across system calls, several registers are
considered volatile and can be safely clobbered.

Therefore we use the pt_regs save area of one of those registers, %g2,
as a place to save and restore orig_i0.

Debuggers transparently will do the right thing because they save and
restore this register already.

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

sparc: Avoid calling sigprocmask()

Use set_current_blocked() instead.

Signed-off-by: David S. Miller <davem@davemloft.net>

sparc: Use set_current_blocked()

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether

sparc: Use set_current_blocked()

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

sparc: Allow handling signals when stack is corrupted.

If we can't push the pending register windows onto the user's stack,
we disallow signal delivery even if the signal would be delivered on a
val

sparc: Allow handling signals when stack is corrupted.

If we can't push the pending register windows onto the user's stack,
we disallow signal delivery even if the signal would be delivered on a
valid seperate signal stack.

Add a register window save area in the signal frame, and store any
unsavable windows there.

On sigreturn, if any windows are still queued up in the signal frame,
try to push them back onto the stack and if that fails we kill the
process immediately.

This allows the debug/tst-longjmp_chk2 glibc test case to pass.

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

sparc: Prevent no-handler signal syscall restart recursion.

Explicitly clear the "in-syscall" bit when we have no signal
handler and back up the program counters to back up the system
call.

Reporte

sparc: Prevent no-handler signal syscall restart recursion.

Explicitly clear the "in-syscall" bit when we have no signal
handler and back up the program counters to back up the system
call.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

sparc: Don't mask signal when we can't setup signal frame.

Don't invoke the signal handler tracehook in that situation
either.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S.

sparc: Don't mask signal when we can't setup signal frame.

Don't invoke the signal handler tracehook in that situation
either.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

sparc: Align clone and signal stacks to 16 bytes.

This is mandatory for 64-bit processes, and doing it also for 32-bit
processes saves a conditional in the compat case.

This fixes the glibc/nptl/ts

sparc: Align clone and signal stacks to 16 bytes.

This is mandatory for 64-bit processes, and doing it also for 32-bit
processes saves a conditional in the compat case.

This fixes the glibc/nptl/tst-stdio1 test case, as well
as many others, on 64-bit.

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

KEYS: Add a keyctl to install a process's session keyring on its parent [try #6]

Add a keyctl to install a process's session keyring onto its parent. This
replaces the parent's session keyring. Be

KEYS: Add a keyctl to install a process's session keyring on its parent [try #6]

Add a keyctl to install a process's session keyring onto its parent. This
replaces the parent's session keyring. Because the COW credential code does
not permit one process to change another process's credentials directly, the
change is deferred until userspace next starts executing again. Normally this
will be after a wait*() syscall.

To support this, three new security hooks have been provided:
cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in
the blank security creds and key_session_to_parent() - which asks the LSM if
the process may replace its parent's session keyring.

The replacement may only happen if the process has the same ownership details
as its parent, and the process has LINK permission on the session keyring, and
the session keyring is owned by the process, and the LSM permits it.

Note that this requires alteration to each architecture's notify_resume path.
This has been done for all arches barring blackfin, m68k* and xtensa, all of
which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the
replacement to be performed at the point the parent process resumes userspace
execution.

This allows the userspace AFS pioctl emulation to fully emulate newpag() and
the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to
alter the parent process's PAG membership. However, since kAFS doesn't use
PAGs per se, but rather dumps the keys into the session keyring, the session
keyring of the parent must be replaced if, for example, VIOCSETTOK is passed
the newpag flag.

This can be tested with the following program:

#include <stdio.h>
#include <stdlib.h>
#include <keyutils.h>

#define KEYCTL_SESSION_TO_PARENT 18

#define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0)

int main(int argc, char **argv)
{
key_serial_t keyring, key;
long ret;

keyring = keyctl_join_session_keyring(argv[1]);
OSERROR(keyring, "keyctl_join_session_keyring");

key = add_key("user", "a", "b", 1, keyring);
OSERROR(key, "add_key");

ret = keyctl(KEYCTL_SESSION_TO_PARENT);
OSERROR(ret, "KEYCTL_SESSION_TO_PARENT");

return 0;
}

Compiled and linked with -lkeyutils, you should see something like:

[dhowells@andromeda ~]$ keyctl show
Session Keyring
-3 --alswrv 4043 4043 keyring: _ses
355907932 --alswrv 4043 -1 \_ keyring: _uid.4043
[dhowells@andromeda ~]$ /tmp/newpag
[dhowells@andromeda ~]$ keyctl show
Session Keyring
-3 --alswrv 4043 4043 keyring: _ses
1055658746 --alswrv 4043 4043 \_ user: a
[dhowells@andromeda ~]$ /tmp/newpag hello
[dhowells@andromeda ~]$ keyctl show
Session Keyring
-3 --alswrv 4043 4043 keyring: hello
340417692 --alswrv 4043 4043 \_ user: a

Where the test program creates a new session keyring, sticks a user key named
'a' into it and then installs it on its parent.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

show more ...

sparc,sparc64: unify kernel/

o Move all files from sparc64/kernel/ to sparc/kernel
- rename as appropriate
o Update sparc/Makefile to the changes
o Update sparc/kernel/Makefile to include the spar

sparc,sparc64: unify kernel/

o Move all files from sparc64/kernel/ to sparc/kernel
- rename as appropriate
o Update sparc/Makefile to the changes
o Update sparc/kernel/Makefile to include the sparc64 files

NOTE: This commit changes link order on sparc64!

Link order had to change for either of sparc32 and sparc64.
And assuming sparc64 see more testing than sparc32 change link
order on sparc64 where issues will be caught faster.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...