sh: initial stack protector support.

This implements basic -fstack-protector support, based on the early ARM
version in c743f38013aeff58ef6252601e397b5ba281c633. The SMP case is
limited to the initi

sh: initial stack protector support.

This implements basic -fstack-protector support, based on the early ARM
version in c743f38013aeff58ef6252601e397b5ba281c633. The SMP case is
limited to the initial canary value, while the UP case handles per-task
granularity (limited to 32-bit sh until a new enough sh64 compiler
manifests itself).

Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com>
Reviewed-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: Add default uImage rule for sh7757lcr

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

serial: sh-sci: Abstract register maps.

This takes a bit of a sledgehammer to the horribly CPU subtype
ifdef-ridden header and abstracts all of the different register layouts
in to distinct types wh

serial: sh-sci: Abstract register maps.

This takes a bit of a sledgehammer to the horribly CPU subtype
ifdef-ridden header and abstracts all of the different register layouts
in to distinct types which in turn can be overriden on a per-port basis,
or permitted to default to the map matching the port type at probe time.

In the process this ultimately fixes up inumerable bugs with mismatches
on various CPU types (particularly the legacy ones that were obviously
broken years ago and no one noticed) and provides a more tightly coupled
and consolidated platform for extending and implementing generic
features.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: support XZ-compressed kernel.

Follow the x86 change and wire up support for the XZ decompressor.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: mach-edosk7705: Kill off machtype, consolidate board def.

Trivial shuffling and tidying.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: mach-systemh: Kill off dead board.

This code has been untouched since it was merged many years ago, and has
severely bitrotted since, suggesting that the board has no real users
left. Notice of

sh: mach-systemh: Kill off dead board.

This code has been untouched since it was merged many years ago, and has
severely bitrotted since, suggesting that the board has no real users
left. Notice of intent to remove has been sent out over the last few
years, with no takers. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: mach-snapgear: Kill off machtype, consolidate board def.

Only the secureedge5410 was ever supported by this code, so make the
board specification explicit rather than perpetuating a mach group.

sh: mach-snapgear: Kill off machtype, consolidate board def.

Only the secureedge5410 was ever supported by this code, so make the
board specification explicit rather than perpetuating a mach group.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: mach-sdk7786: update defconfig for compressed kernel image.

Now that compressed image loading is possible for sdk7786, drop the
vmlinux.bin default image target and update the defconfig accordin

sh: mach-sdk7786: update defconfig for compressed kernel image.

Now that compressed image loading is possible for sdk7786, drop the
vmlinux.bin default image target and update the defconfig accordingly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: mach-titan: Kill off unused PIO port mangling.

Nothing is using this, kill it off. Fixing up access sizes can be done
with trapped I/O for anyone wanting to make use of this for devices that
nee

sh: mach-titan: Kill off unused PIO port mangling.

Nothing is using this, kill it off. Fixing up access sizes can be done
with trapped I/O for anyone wanting to make use of this for devices that
need it, everything else is already pure MMIO.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: Preliminary SDK7786 board support.

This stubs in some preliminary board support for the RTE SDK7786.

This is quite stunted at the moment, and primarily builds on top of the
system FPGA. FPGA IR

sh: Preliminary SDK7786 board support.

This stubs in some preliminary board support for the RTE SDK7786.

This is quite stunted at the moment, and primarily builds on top of the
system FPGA. FPGA IRQs are handled via CPU IRL masking for simplicity,
with initial peripheral support restricted to the debug ethernet.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: Add a vmlinux.bin target.

This makes vmlinux.bin generation an explicit make target, as opposed to
just a dependency for some of the other targets.

Signed-off-by: Paul Mundt <lethal@linux-sh.or

sh: Add a vmlinux.bin target.

This makes vmlinux.bin generation an explicit make target, as opposed to
just a dependency for some of the other targets.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: Add support for LZO-compressed kernels.

Plugs in LZO along with the others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: move machtypes.h to include/generated

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michal Marek <mmare

sh: move machtypes.h to include/generated

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>

show more ...

sh: Add default uImage rule for se7724, ap325rxa, and migor.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Move ap325rxa board code into separate directory

Move the AP325RXA board code from a single board file
to a separate directory. This to make it easy to add
support for sdram sleep mode code.

Si

sh: Move ap325rxa board code into separate directory

Move the AP325RXA board code from a single board file
to a separate directory. This to make it easy to add
support for sdram sleep mode code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: Document uImage.bin target in archhelp.

This was missing from the previous patch.

Reported-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: add uImage.bin target

Add an uImage.bin target to allow uncompressed uImages.
Useful for boards with busted u-boot decompression like
the rsk7203 on my desk.

Signed-off-by: Magnus Damm <damm@op

sh: add uImage.bin target

Add an uImage.bin target to allow uncompressed uImages.
Useful for boards with busted u-boot decompression like
the rsk7203 on my desk.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: Add EcoVec (SH7724) board support

This adds preliminary support for the EcoVec board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh

sh: Add EcoVec (SH7724) board support

This adds preliminary support for the EcoVec board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: dwarf unwinder support.

This is a first cut at a generic DWARF unwinder for the kernel. It's
still lacking DWARF64 support and the DWARF expression support hasn't
been tested very well but it is

sh: dwarf unwinder support.

This is a first cut at a generic DWARF unwinder for the kernel. It's
still lacking DWARF64 support and the DWARF expression support hasn't
been tested very well but it is generating proper stacktraces on SH for
WARN_ON() and NULL dereferences.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: Add romImage target to archhelp.

Adds an archhelp blurb for the romImage target so it is reflected in
'make help'.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: romImage support V2

This patch contains support for the romImage build target V2.

The resulting romImage file should be burned to rom
or flash and could be used as small boot loader.

Board cod

sh: romImage support V2

This patch contains support for the romImage build target V2.

The resulting romImage file should be burned to rom
or flash and could be used as small boot loader.

Board code should keep their setup code in the file
romimage.h located in their mach include directory.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: kfr2r09 board support - SCIF console

This patch adds basic kfr2r09 board support. Only
the SCIF1 console is supported with this patch, but
this patch and a proper sh7724 configuration is all
tha

sh: kfr2r09 board support - SCIF console

This patch adds basic kfr2r09 board support. Only
the SCIF1 console is supported with this patch, but
this patch and a proper sh7724 configuration is all
that is needed. Combine with an initramfs to have a
small RAM based kernel and distribution booted as
zImage from RAM via JTAG.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: bzip2/lzma uImage support.

This builds on the bzip2/lzma zImage support change and wires it up for
uImages. Based on the blackfin implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Decouple mcount from ftrace.

This adds a general CONFIG_MCOUNT in order to permit mcount generation
without ftrace support. This is primarily for allowing platforms to
enable aggressive stack ov

sh: Decouple mcount from ftrace.

This adds a general CONFIG_MCOUNT in order to permit mcount generation
without ftrace support. This is primarily for allowing platforms to
enable aggressive stack overflow checking without having to enable ftrace
support. Based on the sparc64 implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

sh: plug vsyscall dir in to archclean.

The vsyscall targets are presently not cleaned up, so just handle it in
the archclean rule.

Reported-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mun

sh: plug vsyscall dir in to archclean.

The vsyscall targets are presently not cleaned up, so just handle it in
the archclean rule.

Reported-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...