s390: update defconfigs

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/defconfig: allow early device mapper disks

doing make install on an Ubuntu that is installed on an LVM will fail to
boot. Turns out that defconfig misses 2 device mapper related configs
for the

s390/defconfig: allow early device mapper disks

doing make install on an Ubuntu that is installed on an LVM will fail to
boot. Turns out that defconfig misses 2 device mapper related configs
for the Ubuntu initramfs.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/configs: change CONFIG_VIRTIO_CONSOLE to "m"

In former times, the virtio-console code had to be compiled into
the kernel since the old guest virtio transport had some hard de-
pendencies. But s

s390/configs: change CONFIG_VIRTIO_CONSOLE to "m"

In former times, the virtio-console code had to be compiled into
the kernel since the old guest virtio transport had some hard de-
pendencies. But since the old virtio transport has been removed in
commit 7fb2b2d51244 ("s390/virtio: remove the old KVM virtio transport"),
we do not have this limitation anymore.
Commit bb533ec8bacd ("s390/config: do not select VIRTIO_CONSOLE via
Kconfig") then also lifted the hard setting in the Kconfig system, so
we can finally switch the CONFIG_VIRTIO_CONSOLE knob to compile this
driver as a module now, making it more flexible for the user to only
load it if it is really required.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20210428082442.321327-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/configs: enable CONFIG_PCI_IOV

All major distributions ship with CONFIG_PCI_IOV=y so let us enable it
for our defconfigs as well.

Note also that since commit e5794cf1a270 ("s390/pci: create li

s390/configs: enable CONFIG_PCI_IOV

All major distributions ship with CONFIG_PCI_IOV=y so let us enable it
for our defconfigs as well.

Note also that since commit e5794cf1a270 ("s390/pci: create links
between PFs and VFs") we enabled proper linking between PFs and their
associated VFs so with this commit and its fixes applied we can fully
support handling SR-IOV enabled PFs.

Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390: update defconfigs

Set CONFIG_FRAME_WARN to 2048, which is the default for 64 bit architectures.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390: update defconfigs

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/defconfig: add some NFT modules

Since Fedora 33 the virtualization stack of Fedora requires a couple of
netfilter modules to function properly. Let's add these to defconfig and
debug_defconfig.

s390/defconfig: add some NFT modules

Since Fedora 33 the virtualization stack of Fedora requires a couple of
netfilter modules to function properly. Let's add these to defconfig and
debug_defconfig.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390: update defconfigs

Disable CONFIG_TMPFS_INODE64 which is currently broken on s390x
because size of ino_t on s390x is 4 bytes.

This fixes the following error with kdump:

[ 9.415082] [608]:

s390: update defconfigs

Disable CONFIG_TMPFS_INODE64 which is currently broken on s390x
because size of ino_t on s390x is 4 bytes.

This fixes the following error with kdump:

[ 9.415082] [608]: Remounting '/' read-only in with options 'size=238372k,nr_inodes=59593,inode64'.
[ 9.415093] rootfs: Cannot use inode64 with <64bit inums in kernel
[ 9.415093]
[ 9.415100] [608]: Failed to remount '/' read-only: Invalid argument

Fixes: 5c60ed283e1d ("s390: update defconfigs")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

module: remove EXPORT_UNUSED_SYMBOL*

EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the
unused functionality as we generally just remove unused code anyway.

Reviewed-by: Miroslav Bene

module: remove EXPORT_UNUSED_SYMBOL*

EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the
unused functionality as we generally just remove unused code anyway.

Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>

show more ...

arch: s390: Remove CONFIG_OPROFILE support

The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf inter

arch: s390: Remove CONFIG_OPROFILE support

The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.

Remove the old oprofile's architecture specific support.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

show more ...

s390: convert to generic entry

This patch converts s390 to use the generic entry infrastructure from
kernel/entry/*.

There are a few special things on s390:

- PIF_PER_TRAP is moved to TIF_PER_TRAP

s390: convert to generic entry

This patch converts s390 to use the generic entry infrastructure from
kernel/entry/*.

There are a few special things on s390:

- PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't
know about our PIF flags in exit_to_user_mode_loop().

- The old code had several ways to restart syscalls:

a) PIF_SYSCALL_RESTART, which was only set during execve to force a
restart after upgrading a process (usually qemu-kvm) to pgste page
table extensions.

b) PIF_SYSCALL, which is set by do_signal() to indicate that the
current syscall should be restarted. This is changed so that
do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use
PIF_SYSCALL doesn't work with the generic code, and changing it
to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART
more unique.

- On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by
executing a svc instruction on the process stack which causes a fault.
While handling that fault the fault code sets PIF_SYSCALL to hand over
processing to the syscall code on exit to usermode.

The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets
a return value for a syscall. The s390x ptrace ABI uses r2 both for the
syscall number and return value, so ptrace cannot set the syscall number +
return value at the same time. The flag makes handling that a bit easier.
do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET
is set.

CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY.
CR1/7/13 will be checked both on kernel entry and exit to contain the
correct asces.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390: update defconfigs

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: update defconfigs

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

mm/gup_benchmark: rename to mm/gup_test

Patch series "selftests/vm: gup_test, hmm-tests, assorted improvements", v3.

Summary: This series provides two main things, and a number of smaller
supportin

mm/gup_benchmark: rename to mm/gup_test

Patch series "selftests/vm: gup_test, hmm-tests, assorted improvements", v3.

Summary: This series provides two main things, and a number of smaller
supporting goodies. The two main points are:

1) Add a new sub-test to gup_test, which in turn is a renamed version
of gup_benchmark. This sub-test allows nicer testing of dump_pages(),
at least on user-space pages.

For quite a while, I was doing a quick hack to gup_test.c whenever I
wanted to try out changes to dump_page(). Then Matthew Wilcox asked me
what I meant when I said "I used my dump_page() unit test", and I
realized that it might be nice to check in a polished up version of
that.

Details about how it works and how to use it are in the commit
description for patch #6 ("selftests/vm: gup_test: introduce the
dump_pages() sub-test").

2) Fixes a limitation of hmm-tests: these tests are incredibly useful,
but only if people actually build and run them. And it turns out that
libhugetlbfs is a little too effective at throwing a wrench in the
works, there. So I've added a little configuration check that removes
just two of the 21 hmm-tests, if libhugetlbfs is not available.

Further details in the commit description of patch #8
("selftests/vm: hmm-tests: remove the libhugetlbfs dependency").

Other smaller things that this series does:

a) Remove code duplication by creating gup_test.h.

b) Clear up the sub-test organization, and their invocation within
run_vmtests.sh.

c) Other minor assorted improvements.

[1] v2 is here:
https://lore.kernel.org/linux-doc/20200929212747.251804-1-jhubbard@nvidia.com/

[2] https://lore.kernel.org/r/CAHk-=wgh-TMPHLY3jueHX7Y2fWh3D+nMBqVS__AZm6-oorquWA@mail.gmail.com

This patch (of 9):

Rename nearly every "gup_benchmark" reference and file name to "gup_test".
The one exception is for the actual gup benchmark test itself.

The current code already does a *little* bit more than benchmarking, and
definitely covers more than get_user_pages_fast(). More importantly,
however, subsequent patches are about to add some functionality that is
non-benchmark related.

Closely related changes:

* Kconfig: in addition to renaming the options from GUP_BENCHMARK to
GUP_TEST, update the help text to reflect that it's no longer a
benchmark-only test.

Link: https://lkml.kernel.org/r/20201026064021.3545418-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20201026064021.3545418-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

s390: update defconfigs

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390: add ARCH_HAS_DEBUG_WX support

Checks the whole kernel address space for W+X mappings. Note that
currently the first lowcore page unfortunately has to be mapped
W+X. Therefore this not reported

s390: add ARCH_HAS_DEBUG_WX support

Checks the whole kernel address space for W+X mappings. Note that
currently the first lowcore page unfortunately has to be mapped
W+X. Therefore this not reported as an insecure mapping.

For the very same reason the wording is also different to other
architectures if the test passes:

On s390 it is "no unexpected W+X pages found" instead of
"no W+X pages found".

Tested-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/mm,ptdump: convert to generic page table dumper

Make use of generic ptdump infrastructure.

Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Sign

s390/mm,ptdump: convert to generic page table dumper

Make use of generic ptdump infrastructure.

Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390: update defconfigs

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: update defconfigs

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

s390/config: do not select VIRTIO_CONSOLE via Kconfig

select does not ensure that dependencies are also selected. Instead of
selecting VIRTIO_CONSOLE from S390_GUEST we should rather add this to
the

s390/config: do not select VIRTIO_CONSOLE via Kconfig

select does not ensure that dependencies are also selected. Instead of
selecting VIRTIO_CONSOLE from S390_GUEST we should rather add this to
the defconfigs. So we update those as well.

Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390/defconfig: enable CONFIG_PROTECTED_VIRTUALIZATION_GUEST

The guest support for protected virtualization is default on most
distributions.

Also refresh defconfig and debug_defconfig.

Signed-off

s390/defconfig: enable CONFIG_PROTECTED_VIRTUALIZATION_GUEST

The guest support for protected virtualization is default on most
distributions.

Also refresh defconfig and debug_defconfig.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

s390: update defconfigs

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/crypto: Support for SHA3 via CPACF (MSA6)

This patch introduces sha3 support for s390.

- Rework the s390-specific SHA1 and SHA2 related code to
provide the basis for SHA3.
- Provide two new

s390/crypto: Support for SHA3 via CPACF (MSA6)

This patch introduces sha3 support for s390.

- Rework the s390-specific SHA1 and SHA2 related code to
provide the basis for SHA3.
- Provide two new kernel modules sha3_256_s390 and
sha3_512_s390 together with new kernel options.

Signed-off-by: Joerg Schmidbauer <jschmidb@de.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

show more ...

kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE

This is a preparatory patch for kexec_file_load() lockdown. A locked down
kernel needs to prevent unsigned kernel images from b

kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE

This is a preparatory patch for kexec_file_load() lockdown. A locked down
kernel needs to prevent unsigned kernel images from being loaded with
kexec_file_load(). Currently, the only way to force the signature
verification is compiling with KEXEC_VERIFY_SIG. This prevents loading
usigned images even when the kernel is not locked down at runtime.

This patch splits KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE.
Analogous to the MODULE_SIG and MODULE_SIG_FORCE for modules, KEXEC_SIG
turns on the signature verification but allows unsigned images to be
loaded. KEXEC_SIG_FORCE disallows images without a valid signature.

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
cc: kexec@lists.infradead.org
Signed-off-by: James Morris <jmorris@namei.org>

show more ...

s390: update configs

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>