s390: move the install rule to arch/s390/Makefile

Currently, the install target in arch/s390/Makefile descends into
arch/s390/boot/Makefile to invoke the shell script, but there is no
good reason to

s390: move the install rule to arch/s390/Makefile

Currently, the install target in arch/s390/Makefile descends into
arch/s390/boot/Makefile to invoke the shell script, but there is no
good reason to do so.

arch/s390/Makefile can run the shell script directly.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210729142338.446002-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390: enable KCSAN

s390x GCC and SystemZ Clang have ThreadSanitizer support now [1] [2],
so enable KCSAN for s390.

[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=ea22954e7c58
[2] https://reviews

s390: enable KCSAN

s390x GCC and SystemZ Clang have ThreadSanitizer support now [1] [2],
so enable KCSAN for s390.

[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=ea22954e7c58
[2] https://reviews.llvm.org/D105629

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/boot: move dma sections from decompressor to decompressed kernel

This change simplifies the task of making the decompressor relocatable.

The decompressor's image contains special DMA sections

s390/boot: move dma sections from decompressor to decompressed kernel

This change simplifies the task of making the decompressor relocatable.

The decompressor's image contains special DMA sections between _sdma and
_edma. This DMA segment is loaded at boot as part of the decompressor and
then simply handed over to the decompressed kernel. The decompressor itself
never uses it in any way. The primary reason for this is the need to keep
the aforementioned DMA segment below 2GB which is required by architecture,
and because the decompressor is always loaded at a fixed low physical
address, it is guaranteed that the DMA region will not cross the 2GB
memory limit. If the DMA region had been placed in the decompressed kernel,
then KASLR would make this guarantee impossible to fulfill or it would
be restricted to the first 2GB of memory address space.

This commit moves all DMA sections between _sdma and _edma from
the decompressor's image to the decompressed kernel's image. The complete
DMA region is placed in the init section of the decompressed kernel and
immediately relocated below 2GB at start-up before it is needed by other
parts of the decompressed kernel. The relocation of the DMA region happens
even if the decompressed kernel is already located below 2GB in order
to keep the first implementation simple. The relocation should not have
any noticeable impact on boot time because the DMA segment is only a couple
of pages.

After relocating the DMA sections, the kernel has to fix all references
which point into it. In order to automate this, place all variables
pointing into the DMA sections in a special .dma.refs section. All such
variables must be defined using the new __dma_ref macro. Only variables
containing addresses within the DMA sections must be placed in the new
.dma.refs section.

Furthermore, move the initialization of control registers from
the decompressor to the decompressed kernel because some control registers
reference tables that must be placed in the DMA data section to
guarantee that their addresses are below 2G. Because the decompressed
kernel relocates the DMA sections at startup, the content of control
registers CR2, CR5 and CR15 must be updated with new addresses after
the relocation. The decompressed kernel initializes all control registers
early at boot and then updates the content of CR2, CR5 and CR15
as soon as the DMA relocation has occurred. This practically reverts
the commit a80313ff91ab ("s390/kernel: introduce .dma sections").

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.12 merge window.

Merge tag 'v5.11' into next

Merge with mainline to get latest APIs and device tree bindings.

Merge branch 'for-5.11/elecom' into for-linus

- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma

Merge remote-tracking branch 'spi/for-5.10' into spi-linus

Merge remote-tracking branch 'asoc/for-5.10' into asoc-linus

Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-nex

Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-next/signal-tag-bits' and 'for-next/cmdline-extended' into for-next/core

* for-next/kvm-build-fix:
: Fix KVM build issues with 64K pages
KVM: arm64: Fix build error in user_mem_abort()

* for-next/va-refactor:
: VA layout changes
arm64: mm: don't assume struct page is always 64 bytes
Documentation/arm64: fix RST layout of memory.rst
arm64: mm: tidy up top of kernel VA space
arm64: mm: make vmemmap region a projection of the linear region
arm64: mm: extend linear region for 52-bit VA configurations

* for-next/lto:
: Upgrade READ_ONCE() to RCpc acquire on arm64 with LTO
arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y
arm64: alternatives: Remove READ_ONCE() usage during patch operation
arm64: cpufeatures: Add capability for LDAPR instruction
arm64: alternatives: Split up alternative.h
arm64: uaccess: move uao_* alternatives to asm-uaccess.h

* for-next/mem-hotplug:
: Memory hotplug improvements
arm64/mm/hotplug: Ensure early memory sections are all online
arm64/mm/hotplug: Enable MEM_OFFLINE event handling
arm64/mm/hotplug: Register boot memory hot remove notifier earlier
arm64: mm: account for hotplug memory when randomizing the linear region

* for-next/cppc-ffh:
: Add CPPC FFH support using arm64 AMU counters
arm64: abort counter_read_on_cpu() when irqs_disabled()
arm64: implement CPPC FFH support using AMUs
arm64: split counter validation function
arm64: wrap and generalise counter read functions

* for-next/pad-image-header:
: Pad Image header to 64KB and unmap it
arm64: head: tidy up the Image header definition
arm64/head: avoid symbol names pointing into first 64 KB of kernel image
arm64: omit [_text, _stext) from permanent kernel mapping

* for-next/zone-dma-default-32-bit:
: Default to 32-bit wide ZONE_DMA (previously reduced to 1GB for RPi4)
of: unittest: Fix build on architectures without CONFIG_OF_ADDRESS
mm: Remove examples from enum zone_type comment
arm64: mm: Set ZONE_DMA size based on early IORT scan
arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges
of: unittest: Add test for of_dma_get_max_cpu_address()
of/address: Introduce of_dma_get_max_cpu_address()
arm64: mm: Move zone_dma_bits initialization into zone_sizes_init()
arm64: mm: Move reserve_crashkernel() into mem_init()
arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required
arm64: Ignore any DMA offsets in the max_zone_phys() calculation

* for-next/signal-tag-bits:
: Expose the FAR_EL1 tag bits in siginfo
arm64: expose FAR_EL1 tag bits in siginfo
signal: define the SA_EXPOSE_TAGBITS bit in sa_flags
signal: define the SA_UNSUPPORTED bit in sa_flags
arch: provide better documentation for the arch-specific SA_* flags
signal: clear non-uapi flag bits when passing/returning sa_flags
arch: move SA_* definitions to generic headers
parisc: start using signal-defs.h
parisc: Drop parisc special case for __sighandler_t

* for-next/cmdline-extended:
: Add support for CONFIG_CMDLINE_EXTENDED
arm64: Extend the kernel command line from the bootloader
arm64: kaslr: Refactor early init command line parsing

show more ...

Merge remote-tracking branch 'origin/master' into perf/core

Further perf/core patches will depend on:

d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")

which is already in Li

Merge remote-tracking branch 'origin/master' into perf/core

Further perf/core patches will depend on:

d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")

which is already in Linus' tree.

show more ...

Merge tag 'v5.10-rc1' into kvmarm-master/next

Linux 5.10-rc1

Signed-off-by: Marc Zyngier <maz@kernel.org>

Merge branch 'linus' into perf/kprobes

Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c

Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kerne

Merge branch 'linus' into perf/kprobes

Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c

Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kernel/kprobes.c, which effectively
reverts this upstream workaround:

645f224e7ba2: ("kprobes: Tell lockdep about kprobe nesting")

Since the new code *should* be fine without nesting.

Knock on wood ...

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up with v5.10-rc2 and drm-misc-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'core/urgent' into core/entry

Pick up the entry fix before further modifications.

Merge drm/drm-next into drm-misc-next

Daniel needs -rc2 in drm-misc-next to merge some patches

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'drm-intel-fixes-2020-10-29' into gvt-fixes

Backmerge for 5.10-rc1 to apply one extra APL fix.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'v5.10-rc1' into regulator-5.10

Linux 5.10-rc1

Merge tag 'v5.10-rc1' into spi-5.10

Linux 5.10-rc1

Merge tag 'v5.10-rc1' into asoc-5.10

Linux 5.10-rc1

Merge tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Remove address space overrides using set_fs()

- Convert to generic vDS

Merge tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Remove address space overrides using set_fs()

- Convert to generic vDSO

- Convert to generic page table dumper

- Add ARCH_HAS_DEBUG_WX support

- Add leap seconds handling support

- Add NVMe firmware-assisted kernel dump support

- Extend NVMe boot support with memory clearing control and addition of
kernel parameters

- AP bus and zcrypt api code rework. Add adapter configure/deconfigure
interface. Extend debug features. Add failure injection support

- Add ECC secure private keys support

- Add KASan support for running protected virtualization host with
4-level paging

- Utilize destroy page ultravisor call to speed up secure guests
shutdown

- Implement ioremap_wc() and ioremap_prot() with MIO in PCI code

- Various checksum improvements

- Other small various fixes and improvements all over the code

* tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits)
s390/uaccess: fix indentation
s390/uaccess: add default cases for __put_user_fn()/__get_user_fn()
s390/zcrypt: fix wrong format specifications
s390/kprobes: move insn_page to text segment
s390/sie: fix typo in SIGP code description
s390/lib: fix kernel doc for memcmp()
s390/zcrypt: Introduce Failure Injection feature
s390/zcrypt: move ap_msg param one level up the call chain
s390/ap/zcrypt: revisit ap and zcrypt error handling
s390/ap: Support AP card SCLP config and deconfig operations
s390/sclp: Add support for SCLP AP adapter config/deconfig
s390/ap: add card/queue deconfig state
s390/ap: add error response code field for ap queue devices
s390/ap: split ap queue state machine state from device state
s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG
s390/zcrypt: introduce msg tracking in zcrypt functions
s390/startup: correct early pgm check info formatting
s390: remove orphaned extern variables declarations
s390/kasan: make sure int handler always run with DAT on
s390/ipl: add support to control memory clearing for nvme re-IPL
...

show more ...

s390/boot: enable .bss section for compressed kernel

- Support static uninitialized variables in compressed kernel.
- Remove chkbss script
- Get rid of workarounds for not having .bss section

Signe

s390/boot: enable .bss section for compressed kernel

- Support static uninitialized variables in compressed kernel.
- Remove chkbss script
- Get rid of workarounds for not having .bss section

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

Merge branch 'master' into for-next

Sync with Linus' branch in order to be able to apply fixups
of more recent patches.

Merge branch 'next' into for-linus

Prepare input updates for 5.9 merge window.

Merge branch 'elan-i2c' into next

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

Merge branch 'next' into for-linus

Prepare input updates for 5.8 merge window.