[POWERPC] update {g5,iseries,pseries}_defconfigs

Updating the defconfigs for iseries, pseries, and G5. Sticking with
the defaults, with the following exceptions: I've turned off HW_RANDOM
for all

[POWERPC] update {g5,iseries,pseries}_defconfigs

Updating the defconfigs for iseries, pseries, and G5. Sticking with
the defaults, with the following exceptions: I've turned off HW_RANDOM
for all three configs. For G5, I've enabled SND_AOA and friends as
modules; this includes the FABRIC_LAYOUT, ONYX, TAS, TOONIE and
SOUNDBUS* config options.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

show more ...

[PATCH] powerpc: update {g5,iseries,pseries}_defconfigs

Default choices for all.

Signed-off-by: Will Schmidt <willschm@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Update {g5,pseries,ppc64}_defconfig

Update defconfigs for g5, pseries and generic ppc64. Default choices
for everything, with the following exceptions:

* Enable WINDFARM_PM112 on

[PATCH] powerpc: Update {g5,pseries,ppc64}_defconfig

Update defconfigs for g5, pseries and generic ppc64. Default choices
for everything, with the following exceptions:

* Enable WINDFARM_PM112 on g5 and ppc64.
* Increase CONFIG_NR_CPUS to 4 in g5_defconfig
* CONFIG_TIGON3=y instead of =m in g5_defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

show more ...

[PATCH] e1000: Added disable packet split capability

Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option a

[PATCH] e1000: Added disable packet split capability

Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

show more ...

powerpc: update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: update defconfigs

My patch moving ppc64 RTC to genrtc was supposed to update all
defconfigs, but for some reason, the patch actually posted only had the
pseries one... ouch. This pa

[PATCH] powerpc: update defconfigs

My patch moving ppc64 RTC to genrtc was supposed to update all
defconfigs, but for some reason, the patch actually posted only had the
pseries one... ouch. This patch properly updates all defconfigs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

show more ...

[PATCH] ppc64: Update g5_defconfig for ARCH=powerpc

This patch updates g5_defconfig for ARCH=powerpc in order to add the SMU
support & thermal drivers to it, the pmac sound driver (works on some
G5s

[PATCH] ppc64: Update g5_defconfig for ARCH=powerpc

This patch updates g5_defconfig for ARCH=powerpc in order to add the SMU
support & thermal drivers to it, the pmac sound driver (works on some
G5s) and replaces rivafb with nvidiafb which works better for the cards
found in G5 based machines.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

show more ...

powerpc: Copy default configs into arch/powerpc/configs

Copy default configs into arch/powerpc/configs, rename bpa_defconfig to
cell_defconfig while we're at it.

Signed-off-by: Michael Ellerman <mi

powerpc: Copy default configs into arch/powerpc/configs

Copy default configs into arch/powerpc/configs, rename bpa_defconfig to
cell_defconfig while we're at it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

show more ...

powerpc/configs: Remove dead symbols

Remove references to symbols that no longer exist as reported by
scripts/checkkconfigsymbols.py.

Signed-off-by: Michael Ellerman <mpe@ellerm

powerpc/configs: Remove dead symbols

Remove references to symbols that no longer exist as reported by
scripts/checkkconfigsymbols.py.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-2-mpe@ellerman.id.au

show more ...

scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabled

This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly

scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabled

This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.

The logic behind the quirks is always built into the sr driver.

This also removes the config from all the defconfig files that are enabling
this already.

Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

powerpc/configs: Disable latencytop

latencytop adds almost 4kB to each and every task struct and as such
it doesn't deserve to be in our defconfigs.

Signed-off-by: Anton Blancha

powerpc/configs: Disable latencytop

latencytop adds almost 4kB to each and every task struct and as such
it doesn't deserve to be in our defconfigs.

Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_

powerpc/configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/configs: Don't enable PPC_EARLY_DEBUG in defconfigs

This reverts the remains of commit b9ef7d6b11c1 ("powerpc: Update
default configurations").

That commit was proceeded

powerpc/configs: Don't enable PPC_EARLY_DEBUG in defconfigs

This reverts the remains of commit b9ef7d6b11c1 ("powerpc: Update
default configurations").

That commit was proceeded by a commit which added a config option to
control use of BOOTX for early debug, ie. PPC_EARLY_DEBUG_BOOTX, and
then the update of the defconfigs was intended to not change behaviour
by then enabling the new config option.

However enabling PPC_EARLY_DEBUG had other consequences, notably
causing us to register the udbg console at the end of udbg_early_init().

This means on a system which doesn't have anything that BOOTX can
use (most systems), we register the udbg console very early but the
bootx code just throws everything away, meaning early boot messages
are never printed to the console.

What we want to happen is for the udbg console to only be registered
later (from setup_arch()) once we've setup udbg_putc, and then all
early boot messages will be replayed.

Fixes: b9ef7d6b11c1 ("powerpc: Update default configurations")
Reported-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/config: Enable CONFIG_PRINTK_TIME

for 64bit configs which use for CONFIG_LOG_BUF_SHIFT the same
or higher value than the default (currently 17).

Signed-off-by: Petr Vore

powerpc/config: Enable CONFIG_PRINTK_TIME

for 64bit configs which use for CONFIG_LOG_BUF_SHIFT the same
or higher value than the default (currently 17).

Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

USB: serial: keyspan: Drop firmware Kconfig options

The USB_SERIAL_KEYSPAN_* firmware options no longer do anything.

Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware")

USB: serial: keyspan: Drop firmware Kconfig options

The USB_SERIAL_KEYSPAN_* firmware options no longer do anything.

Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware")
Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

powerpc/configs: Update for CONFIG_SND changes

Commit eb3b705aaed9 ("ALSA: Make CONFIG_SND_OSSEMUL user-selectable")
means we need to set CONFIG_SND_OSSEMUL in our configs, otherwise we

powerpc/configs: Update for CONFIG_SND changes

Commit eb3b705aaed9 ("ALSA: Make CONFIG_SND_OSSEMUL user-selectable")
means we need to set CONFIG_SND_OSSEMUL in our configs, otherwise we
lose some of the SND symbols.

And commit 0181307abc1d ("ALSA: seq: Reorganize kconfig and build")
reorganised things, which causes the churn.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/configs: Drop no longer needed CONFIG_CRYPTO_NULL in g5 / c2k

Since commit 3491244c6298 ("crypto: echainiv - Set Kconfig default to
m") we no longer need to set CONFIG_CRYPTO_NUL

powerpc/configs: Drop no longer needed CONFIG_CRYPTO_NULL in g5 / c2k

Since commit 3491244c6298 ("crypto: echainiv - Set Kconfig default to
m") we no longer need to set CONFIG_CRYPTO_NULL in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/configs: Update for CONFIG_DEBUG_FS being selected via CONFIG_RCU_TRACE

In commit 961518259b3b ("rcu: Enable RCU tracepoints by default to aid
in debugging"), CONFIG_RCU_TRACE wa

powerpc/configs: Update for CONFIG_DEBUG_FS being selected via CONFIG_RCU_TRACE

In commit 961518259b3b ("rcu: Enable RCU tracepoints by default to aid
in debugging"), CONFIG_RCU_TRACE was made default y (if CONFIG_TREE_RCU=y,
which it is for some of our configs).

That in turn causes CONFIG_TREE_RCU_TRACE to be enabled, which selects
CONFIG_DEBUG_FS. The end result is that CONFIG_DEBUG_FS is forced on,
meaning we don't have to enable it in some of our configs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/configs: Drop no longer needed CONFIG_FHANDLE

Since commit f76be61755c5 ("Make CONFIG_FHANDLE default y") we no
longer need to set CONFIG_FHANDLE in our defconfigs.

Sign

powerpc/configs: Drop no longer needed CONFIG_FHANDLE

Since commit f76be61755c5 ("Make CONFIG_FHANDLE default y") we no
longer need to set CONFIG_FHANDLE in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/configs: Explicitly drop CONFIG_INPUT_MOUSEDEV

In commit 73d8ef76006b ("Input: mousedev - stop offering PS/2 to userspace by
default") (Jan 2017), CONFIG_INPUT_MOUSEDEV was switc

powerpc/configs: Explicitly drop CONFIG_INPUT_MOUSEDEV

In commit 73d8ef76006b ("Input: mousedev - stop offering PS/2 to userspace by
default") (Jan 2017), CONFIG_INPUT_MOUSEDEV was switched from default y to
default n, with the explanation:

Evdev interface has been available for many years and by now everyone
is switched to using it, so let's stop offering /dev/input/mouseN
and /dev/psaux by default.

We had a number of configs which had it enabled, but going by the above
explanation probably don't need it enabled anymore.

So drop the last remnants of it from our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNG

Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconf

powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNG

Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc/configs: Update for symbol movement only

Update defconfigs for symbols that have moved around, without their
value changing.

Signed-off-by: Michael Ellerman <mpe@ellerma

powerpc/configs: Update for symbol movement only

Update defconfigs for symbols that have moved around, without their
value changing.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc: convert g5_defconfig to use libata PATA drivers

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata

powerpc: convert g5_defconfig to use libata PATA drivers

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts g5_defconfig to use libata PATA drivers.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

show more ...

powerpc/configs: Remove old symbols from defconfigs

Update defconfigs to remove old symbols and comments referencing old
symbols.

Dropped:

* AVERAGE
* INET_LRO

powerpc/configs: Remove old symbols from defconfigs

Update defconfigs to remove old symbols and comments referencing old
symbols.

Dropped:

* AVERAGE
* INET_LRO
* EXT3_DEFAULTS_TO_ORDERED
* EXT3_FS_XATTR
* I2O
* INFINIBAND_AMSO1100
* INFINIBAND_EHCA
* IP1000

Replaced:

* BLK_DEV_XIP -> BLK_DEV_RAM_DAX
* CLK_PPC_CORENET -> CLK_QORIQ
* EXT2_FS_XIP -> FS_DAX
* EXT3_FS* -> EXT4_FS*

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show more ...

powerpc: Update G5 defconfig

Add CGROUPS and DEVTMPFS, which allows booting with newer userspaces.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>