arm64: dts: meson-axg: s400: Enable PHY interrupt

Now that the GPIO controller has been enabled also on AXG we can hook up
the GPIO interrupt for the PHY.

Tested-by: Jerome Brun

arm64: dts: meson-axg: s400: Enable PHY interrupt

Now that the GPIO controller has been enabled also on AXG we can hook up
the GPIO interrupt for the PHY.

Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson: s400: add bcm bluetooth device

Add broadcom bluetooth device on the s400

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khil

arm64: dts: meson: s400: add bcm bluetooth device

Add broadcom bluetooth device on the s400

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: s400: add cts-rts to the bluetooth uart

The uart used with bluetooth chipset on the s400 has flow control
available. Let's enable it.

Signed-off-by: Jerom

arm64: dts: meson-axg: s400: add cts-rts to the bluetooth uart

The uart used with bluetooth chipset on the s400 has flow control
available. Let's enable it.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: fix dtc warning about unit address

section 2.2.1 of the DT specs says: " If the node has no reg property,
the @unit-address must be omitted and the node-name alone

arm64: dts: meson-axg: fix dtc warning about unit address

section 2.2.1 of the DT specs says: " If the node has no reg property,
the @unit-address must be omitted and the node-name alone differentiates
the node from other nodes at the same level in the tree"

Simply replace the '@' with a '-' to fix this warning.

Cc: Fabio Estevam <festevam@gmail.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: s400: disable emmc

While it is possible to rework the s400 board to solder an eMMC on it,
it is not the default option and most boards are fitted with a NAND
i

arm64: dts: meson-axg: s400: disable emmc

While it is possible to rework the s400 board to solder an eMMC on it,
it is not the default option and most boards are fitted with a NAND
instead.

Let's disable the emmc device by default to reflect this. The board
equipped with an eMMC will just have to alter the DT in the
bootloader, like we do for the reserved memory regions.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: s400: add missing emmc pwrseq

eMMC pwrseq is defined in the s400 dts but not used in the emmc node.
This is probably just a copy/paste error

Fixes: 221cf3

arm64: dts: meson-axg: s400: add missing emmc pwrseq

eMMC pwrseq is defined in the s400 dts but not used in the emmc node.
This is probably just a copy/paste error

Fixes: 221cf34bac54 ("ARM64: dts: meson-axg: enable the eMMC controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg-s400: Add chosen and memory nodes

Add missing chosen and memory nodes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumensting

arm64: dts: meson-axg-s400: Add chosen and memory nodes

Add missing chosen and memory nodes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: s400: add pdm to the sound card

Enable the PDM input device on the S400 and it to the sound card

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signe

arm64: dts: meson-axg: s400: add pdm to the sound card

Enable the PDM input device on the S400 and it to the sound card

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: s400: add dmic codec

There are 7 digital mics on the MIC daughter board attached
to the s400 board, so add the digital microphone codec to
its DTS

Sig

arm64: dts: meson-axg: s400: add dmic codec

There are 7 digital mics on the MIC daughter board attached
to the s400 board, so add the digital microphone codec to
its DTS

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: sort nodes consistently

Sort DT nodes by address when possible, by node node name otherwise.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-of

arm64: dts: meson-axg: sort nodes consistently

Sort DT nodes by address when possible, by node node name otherwise.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: s400: add sound card

Add the sound card of the s400. With it the following interface
should be working:
* Lineout
* Daugther card speaker 1 (same output

arm64: dts: meson-axg: s400: add sound card

Add the sound card of the s400. With it the following interface
should be working:
* Lineout
* Daugther card speaker 1 (same output as lineout)
* Linein
* SPDIF output

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: s400: enable audio devices

Enable the audio devices on the s400.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@

arm64: dts: meson-axg: s400: enable audio devices

Enable the audio devices on the s400.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

Merge tag 'amlogic-dt64-3' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic 64-bit DT updates for v4.19, round 3
- add DT support for AXG Aud

Merge tag 'amlogic-dt64-3' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic 64-bit DT updates for v4.19, round 3
- add DT support for AXG Audio

* tag 'amlogic-dt64-3' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson-axg: add spdif-dit codec
arm64: dts: meson-axg: add lineout codec
arm64: dts: meson-axg: add linein codec
arm64: dts: meson-axg: add tdm interfaces
arm64: dts: meson-axg: add tdmout formatters
arm64: dts: meson-axg: add tdmin formatters
arm64: dts: meson-axg: add spdifout
arm64: dts: meson-axg: add audio arb reset controller
arm64: dts: meson-axg: add usb power regulator
arm64: dts: meson-axg: add vcc 5v regulator on the s400
arm64: dts: meson-axg: improve power supplies description

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

arm64: dts: meson-axg: add spdif-dit codec

Add the SPDIF playback codec to the axg s400 board

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <kh

arm64: dts: meson-axg: add spdif-dit codec

Add the SPDIF playback codec to the axg s400 board

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: add lineout codec

Add the es7154 digital to analog converter which supplies the
lienout jack of the s400

Signed-off-by: Jerome Brunet <jbrunet@baylibre.co

arm64: dts: meson-axg: add lineout codec

Add the es7154 digital to analog converter which supplies the
lienout jack of the s400

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: add linein codec

Add the es7241 analog to digital converter which is fed by the
lienin jack of the s400

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com

arm64: dts: meson-axg: add linein codec

Add the es7241 analog to digital converter which is fed by the
lienin jack of the s400

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: add usb power regulator

The usb power regulator is supplied by the vcc 5v regulator and
controlled by a GPIO. This will be needed to enable usb.

Signed-of

arm64: dts: meson-axg: add usb power regulator

The usb power regulator is supplied by the vcc 5v regulator and
controlled by a GPIO. This will be needed to enable usb.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: add vcc 5v regulator on the s400

This regulator is controlled by a GPIO and supplies various devices
on the board, such as the lineout codec, the usb supply or the

arm64: dts: meson-axg: add vcc 5v regulator on the s400

This regulator is controlled by a GPIO and supplies various devices
on the board, such as the lineout codec, the usb supply or the lcd
controller.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-axg: improve power supplies description

Add the parent supply of the s400 power supplies.
Also add 'regulator-always-on' property on the regulators which can't
be d

arm64: dts: meson-axg: improve power supplies description

Add the parent supply of the s400 power supplies.
Also add 'regulator-always-on' property on the regulators which can't
be disabled

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

Merge tag 'amlogic-dt64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic 64-bit DT updates for v4.19
- new SoC: S805x
- new board: S80

Merge tag 'amlogic-dt64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic 64-bit DT updates for v4.19
- new SoC: S805x
- new board: S805x-based P241 board from Amlogic
- AXG: add ADC support w/buttons, add pins for PDM, SPDIF
- AXG: s400 board: preliminary support for audio
- GX: nanopi-k2: add HDMI, CEC, CVBS support

* tag 'amlogic-dt64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-axg: add pdm pins
ARM64: dts: meson-axg: add spdif input pins
ARM64: dts: meson-axg: remove spdif out from gpio a7
ARM64: dts: meson-axg: add adc buttons the S400
ARM64: dts: meson-axg: remove vddio_ao18 from SoC dtsi
ARM64: dts: meson-axg: add saradc support
ARM64: dts: add S805X based P241 board
dt-bindings: amlogic: Add support for GXL S805X and the P241 board
ARM64: dts: amlogic: Add missing cooling device properties for CPUs
ARM64: dts: meson-axg: add spdif output pins
ARM64: dts: meson-axg: add s400 speaker amplifier
ARM64: dts: meson-axg: add s400 main 12v supply
ARM64: dts: meson-axg: add s400 microphone card leds
ARM64: dts: meson-gxbb-nanopi-k2: Add HDMI, CEC and CVBS nodes
ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts
ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM64: dts: meson-axg: add adc buttons the S400

Add the 6 adc buttons of the amlogic S400

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilma

ARM64: dts: meson-axg: add adc buttons the S400

Add the 6 adc buttons of the amlogic S400

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-axg: add saradc support

Add the DT info for SAR ADC of the Amlogic's Meson-AXG SoC.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Yixun L

ARM64: dts: meson-axg: add saradc support

Add the DT info for SAR ADC of the Amlogic's Meson-AXG SoC.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-axg: add s400 speaker amplifier

Add the first of the two tas5707 power amplifier present on the
speaker daughter board.

According to the schematics of the S400

ARM64: dts: meson-axg: add s400 speaker amplifier

Add the first of the two tas5707 power amplifier present on the
speaker daughter board.

According to the schematics of the S400 v3, only I2SB_DIN3 and
I2SC_DOUT2 will be available to the speaker board.

9R83, 9R84 and 9R18 are not connected so no audio signal will be
provided to the second amplifier. There is no point in enabling it
even if it is visible on the i2c bus.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-axg: add s400 main 12v supply

Add a fixed regulator for the main 12v which is the main power supply
of the board.

Signed-off-by: Jerome Brunet <jbrunet@baylibr

ARM64: dts: meson-axg: add s400 main 12v supply

Add a fixed regulator for the main 12v which is the main power supply
of the board.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-axg: add s400 microphone card leds

The microphone card connected to the s400 has 6 leds controlled
through an additional i2c gpio controller.

Signed-off-by: Je

ARM64: dts: meson-axg: add s400 microphone card leds

The microphone card connected to the s400 has 6 leds controlled
through an additional i2c gpio controller.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...