#
ff36932e |
| 24-Jul-2018 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson-axg: add vcc 5v regulator on the s400
This regulator is controlled by a GPIO and supplies various devices on the board, such as the lineout codec, the usb supply or the lcd control
arm64: dts: meson-axg: add vcc 5v regulator on the s400
This regulator is controlled by a GPIO and supplies various devices on the board, such as the lineout codec, the usb supply or the lcd controller.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
9f2619d5 |
| 24-Jul-2018 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson-axg: improve power supplies description
Add the parent supply of the s400 power supplies. Also add 'regulator-always-on' property on the regulators which can't be disabled
Signed-
arm64: dts: meson-axg: improve power supplies description
Add the parent supply of the s400 power supplies. Also add 'regulator-always-on' property on the regulators which can't be disabled
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.17.9, v4.17.8, v4.17.7 |
|
#
aabe5d2d |
| 16-Jul-2018 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson-axg: add adc buttons the S400
Add the 6 adc buttons of the amlogic S400
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
Revision tags: v4.17.6, v4.17.5, v4.17.4 |
|
#
a51b74ea |
| 02-Jul-2018 |
Xingyu Chen <xingyu.chen@amlogic.com> |
ARM64: dts: meson-axg: add saradc support
Add the DT info for SAR ADC of the Amlogic's Meson-AXG SoC.
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogi
ARM64: dts: meson-axg: add saradc support
Add the DT info for SAR ADC of the Amlogic's Meson-AXG SoC.
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
a90193b9 |
| 28-Jun-2018 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson-axg: add s400 speaker amplifier
Add the first of the two tas5707 power amplifier present on the speaker daughter board.
According to the schematics of the S400 v3, only I2SB_DIN3
ARM64: dts: meson-axg: add s400 speaker amplifier
Add the first of the two tas5707 power amplifier present on the speaker daughter board.
According to the schematics of the S400 v3, only I2SB_DIN3 and I2SC_DOUT2 will be available to the speaker board.
9R83, 9R84 and 9R18 are not connected so no audio signal will be provided to the second amplifier. There is no point in enabling it even if it is visible on the i2c bus.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
e120289c |
| 28-Jun-2018 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson-axg: add s400 main 12v supply
Add a fixed regulator for the main 12v which is the main power supply of the board.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by
ARM64: dts: meson-axg: add s400 main 12v supply
Add a fixed regulator for the main 12v which is the main power supply of the board.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
6279f666 |
| 28-Jun-2018 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson-axg: add s400 microphone card leds
The microphone card connected to the s400 has 6 leds controlled through an additional i2c gpio controller.
Signed-off-by: Jerome Brunet <jbrunet
ARM64: dts: meson-axg: add s400 microphone card leds
The microphone card connected to the s400 has 6 leds controlled through an additional i2c gpio controller.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.17.3 |
|
#
6d28d577 |
| 25-Jun-2018 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson-axg: fix ethernet stability issue
Like the odroid-c2 and wetek, the s400 uses the RTL8211F and seems to suffer from the kind of stability issue.
Doing an iperf3 download test, we
ARM64: dts: meson-axg: fix ethernet stability issue
Like the odroid-c2 and wetek, the s400 uses the RTL8211F and seems to suffer from the kind of stability issue.
Doing an iperf3 download test, we can see a significant number of LPI interrupts on the tx path. After a short while (5 to 15 seconds), the network connection dies. If using rootfs over NFS, the connection may also break during the boot sequence.
We still don't have a real explanation for this problem so let's disable EEE once again.
Fixes: f6f6ac914b82 ("ARM64: dts: meson-axg: enable ethernet for A113D S400 board") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.17.2, v4.17.1, v4.17 |
|
#
ffe2f2a4 |
| 17-May-2018 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson-axg: enable i2c AO on the S400 board
The i2c AO is used for the MIC daughter card of the S400 board
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman
ARM64: dts: meson-axg: enable i2c AO on the S400 board
The i2c AO is used for the MIC daughter card of the S400 board
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
5a8a2ed6 |
| 04-May-2018 |
Yixun Lan <yixun.lan@amlogic.com> |
ARM64: dts: meson-axg: enable AP6255 wifi module
The Meson-AXG S400 board is shipped with AP6255 wifi module, which is actually using the brcmfmac 43455 driver.
Signed-off-by: Yixun Lan <yixun.lan@
ARM64: dts: meson-axg: enable AP6255 wifi module
The Meson-AXG S400 board is shipped with AP6255 wifi module, which is actually using the brcmfmac 43455 driver.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
221cf34b |
| 08-Apr-2018 |
Nan Li <nan.li@amlogic.com> |
ARM64: dts: meson-axg: enable the eMMC controller
The IP of eMMC controller in AXG is similiar to Meson-GX series. Here we add the initial support of the HS200 mode with clock running at 166MHz (to
ARM64: dts: meson-axg: enable the eMMC controller
The IP of eMMC controller in AXG is similiar to Meson-GX series. Here we add the initial support of the HS200 mode with clock running at 166MHz (to be safe), since we found some eMMC chip fail to run at 200MHz due to tunning phase error.
Signed-off-by: Nan Li <nan.li@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [khilman: drop incorrect SDIO pwrseq property] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.16 |
|
#
114abfe1 |
| 27-Feb-2018 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: amlogic: Convert to new-style SPDX license identifiers
Move the SPDX-License-Identifier lines to the top and drop the license splat.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.c
ARM64: dts: amlogic: Convert to new-style SPDX license identifiers
Move the SPDX-License-Identifier lines to the top and drop the license splat.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.15 |
|
#
3e5925c6 |
| 10-Jan-2018 |
Yixun Lan <yixun.lan@amlogic.com> |
ARM64: dts: meson-axg: enable the UART_A controller
The UART_A is connected to a BT module on the S400 board.
Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Yixun Lan <yixun.lan@amlo
ARM64: dts: meson-axg: enable the UART_A controller
The UART_A is connected to a BT module on the S400 board.
Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
e496c415 |
| 10-Jan-2018 |
Yixun Lan <yixun.lan@amlogic.com> |
ARM64: dts: meson-axg: complete the pinctrl info for UART_AO_A
Explictly request the pinctrl info for the UART_AO_A controller, otherwise we may need to rely on bootloader for the initialization.
A
ARM64: dts: meson-axg: complete the pinctrl info for UART_AO_A
Explictly request the pinctrl info for the UART_AO_A controller, otherwise we may need to rely on bootloader for the initialization.
Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.13.16 |
|
#
7d6d8a20 |
| 20-Nov-2017 |
Jian Hu <jian.hu@amlogic.com> |
ARM64: dts: meson-axg: enable I2C Master-1 for the audio speaker
In the S400 board, The I2C master-1 is connecting to the audio speaker daughter board.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
ARM64: dts: meson-axg: enable I2C Master-1 for the audio speaker
In the S400 board, The I2C master-1 is connecting to the audio speaker daughter board.
Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
f6f6ac91 |
| 15-Dec-2017 |
Yixun Lan <yixun.lan@amlogic.com> |
ARM64: dts: meson-axg: enable ethernet for A113D S400 board
This is tested in the S400 dev board which use a RTL8211F PHY, and the pins connect to the 'eth_rgmii_y_pins' group.
Reviewed-by: Neil Ar
ARM64: dts: meson-axg: enable ethernet for A113D S400 board
This is tested in the S400 dev board which use a RTL8211F PHY, and the pins connect to the 'eth_rgmii_y_pins' group.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
7bd46a79 |
| 15-Dec-2017 |
Yixun Lan <yixun.lan@amlogic.com> |
ARM64: dts: meson-axg: enable IR controller
Enable IR remote controller which found in Amlogic's Meson-AXG SoCs.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilma
ARM64: dts: meson-axg: enable IR controller
Enable IR remote controller which found in Amlogic's Meson-AXG SoCs.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.14 |
|
#
9d59b708 |
| 13-Oct-2017 |
Yixun Lan <yixun.lan@amlogic.com> |
arm64: dts: meson-axg: add initial A113D SoC DT support
Try to add basic DT support for the Amlogic's Meson-AXG A113D SoC, which describe components as follows: Reserve Memory, CPU, GIC, IRQ, Timer,
arm64: dts: meson-axg: add initial A113D SoC DT support
Try to add basic DT support for the Amlogic's Meson-AXG A113D SoC, which describe components as follows: Reserve Memory, CPU, GIC, IRQ, Timer, UART. It's capable of booting up into the serial console.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10 |
|
#
f450d2c2 |
| 17-Sep-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
arm64: dts: meson-axg-s400: enable USB OTG This enables USB OTG on the S400 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@bay
arm64: dts: meson-axg-s400: enable USB OTG This enables USB OTG on the S400 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23 |
|
#
43004923 |
| 24-Feb-2020 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson: s400: fix sound card codec nodes Some codec nodes of the s400 sound card are numbered with the pattern codec@XX. This pattern should be used only if there is a reg pro
arm64: dts: meson: s400: fix sound card codec nodes Some codec nodes of the s400 sound card are numbered with the pattern codec@XX. This pattern should be used only if there is a reg property in the node which is not case here. Change this to something acceptable. This change is only to better comply with the DT spec. No functional changes expected. Fixes: 6f59dc1afbb2 ("arm64: dts: meson-axg: s400: add sound card") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200224150812.263980-3-jbrunet@baylibre.com
show more ...
|
Revision tags: v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9 |
|
#
b43033b1 |
| 18-Apr-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson: fix mmc pin bias Clk pin does not require bias, data strobe should be pulled low. The rest of the pin (data and cmd) are pulled up. Signed-off-by: Jerome Brun
arm64: dts: meson: fix mmc pin bias Clk pin does not require bias, data strobe should be pulled low. The rest of the pin (data and cmd) are pulled up. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16 |
|
#
ec01fb69 |
| 16-Jan-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson: s400: fix emmc maximum rate Limiting the HS200 rate on the s400 was just a way to mask that the tuning setting were not correct. This seems to have been fixed with
arm64: dts: meson: s400: fix emmc maximum rate Limiting the HS200 rate on the s400 was just a way to mask that the tuning setting were not correct. This seems to have been fixed with the recent MMC driver update. We can now use HS200 at full speed. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
5ca872c5 |
| 16-Jan-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson: s400: enable sdr104 on sdio The bcm wifi/bt device on SDIO support SDR104 and it seems to work well following the recent mmc driver update, so enable this ultra hi
arm64: dts: meson: s400: enable sdr104 on sdio The bcm wifi/bt device on SDIO support SDR104 and it seems to work well following the recent mmc driver update, so enable this ultra high speed mode Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10 |
|
#
99e322cc |
| 13-Dec-2018 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson-axg: s400: add spdifin to the sound card Enable spdif input device on the S400 and add it to the card Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signe
arm64: dts: meson-axg: s400: add spdifin to the sound card Enable spdif input device on the S400 and add it to the card Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
e6a55397 |
| 13-Dec-2018 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson-axg: s400: add spdif-dir codec Add the SPDIF capture codec to the axg s400 board Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilma
arm64: dts: meson-axg: s400: add spdif-dir codec Add the SPDIF capture codec to the axg s400 board Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|