#
ba785205 |
| 05-Jan-2013 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: nomadik: add FSMC NAND
This adds the FSMC NAND driver and flash partitions to the Nomadik device tree.
The only compatible string accepted by this driver is currently "st,spear600-fsmc-nand" w
ARM: nomadik: add FSMC NAND
This adds the FSMC NAND driver and flash partitions to the Nomadik device tree.
The only compatible string accepted by this driver is currently "st,spear600-fsmc-nand" which is inappropriate for this system, so this patch adds the compatible value "stericsson,fsmc-nand" as well.
Cc: linux-mtd@vger.kernel.org Cc: David Woodhouse <dwmw2@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
27bda036 |
| 05-Jan-2013 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: nomadik: move remaining PrimeCells to device tree
The two remaining PrimeCells, RNG and RTC, are migrated to the device tree for device tree boot.
Signed-off-by: Linus Walleij <linus.walleij@l
ARM: nomadik: move remaining PrimeCells to device tree
The two remaining PrimeCells, RNG and RTC, are migrated to the device tree for device tree boot.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
1b542757 |
| 04-Jan-2013 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: nomadik: move pin maps to cpu file
Move the pinctrl maps over to the CPU file and register them right before the pin controller itself. This way the pinmaps will also benefit the device tree bo
ARM: nomadik: move pin maps to cpu file
Move the pinctrl maps over to the CPU file and register them right before the pin controller itself. This way the pinmaps will also benefit the device tree boot.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
f8635abd |
| 04-Jan-2013 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: nomadik: initial devicetree support
Support basic device tree boot on the Nomadik. Implement the support in the cpu file with the intent of deleting the board files later. At this stage IRQ con
ARM: nomadik: initial devicetree support
Support basic device tree boot on the Nomadik. Implement the support in the cpu file with the intent of deleting the board files later. At this stage IRQ controllers, system timer, l2x0 cache, UARTs and thus console boot is fully functional. Patch out the code adding devices by initcalls for now so as not to disturb the boot.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
9e47b8bf |
| 07-Jan-2013 |
Rob Herring <rob.herring@calxeda.com> |
irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h
Now that we have VIC moved to drivers/irqchip and all VIC DT init for platforms using irqchip_init, move gic.h and update the remaining inc
irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h
Now that we have VIC moved to drivers/irqchip and all VIC DT init for platforms using irqchip_init, move gic.h and update the remaining includes.
Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org
show more ...
|
Revision tags: v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1 |
|
#
7cb15e10 |
| 10-Oct-2012 |
Linus Walleij <linus.walleij@linaro.org> |
pinctrl/nomadik: move the platform data header
This moves the platform data header for the Nomadik pin controller to <linux/platform_data/pinctrl-nomadik.h>.
Signed-off-by: Linus Walleij <linus.wal
pinctrl/nomadik: move the platform data header
This moves the platform data header for the Nomadik pin controller to <linux/platform_data/pinctrl-nomadik.h>.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
bb16bd9b |
| 10-Oct-2012 |
Linus Walleij <linus.walleij@linaro.org> |
pinctrl/nomadik: move the platform data header
This moves the platform data header for the Nomadik pin controller to <linux/platform_data/pinctrl-nomadik.h>.
Signed-off-by: Linus Walleij <linus.wal
pinctrl/nomadik: move the platform data header
This moves the platform data header for the Nomadik pin controller to <linux/platform_data/pinctrl-nomadik.h>.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2 |
|
#
2601ccfe |
| 09-Aug-2012 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: nomadik: configure Nomadik for pin control
This converts the Nomadik to using pin control using the driver for the STN8815 ASIC.
Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by:
ARM: nomadik: configure Nomadik for pin control
This converts the Nomadik to using pin control using the driver for the STN8815 ASIC.
Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1 |
|
#
4a31bd28 |
| 11-Jan-2012 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: nomadik: convert to generic clock
Remove more custom stuff by simply converting the Nomadik machine to use generic clocks and move the driver to drivers/clk.
Acked-by: Arnd Bergmann <arnd@arnd
ARM: nomadik: convert to generic clock
Remove more custom stuff by simply converting the Nomadik machine to use generic clocks and move the driver to drivers/clk.
Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Mike Turquette <mturquette@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
b5111d9e |
| 09-Jan-2012 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: nomadik: register PL031 RTC
This registers the PL031 derivate found in the Nomadik 8815 SoCs.
Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
#
7c77852d |
| 09-Jan-2012 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: nomadik: register AMBA devices dynamically
This makes AMBA devices on the Nomadik main CPU die register dynamically, and refactor the registration of the RNG to use this.
Acked-by: Arnd Bergma
ARM: nomadik: register AMBA devices dynamically
This makes AMBA devices on the Nomadik main CPU die register dynamically, and refactor the registration of the RNG to use this.
Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
056c78d3 |
| 09-Jan-2012 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: nomadik: register GPIOs dynamically
Register the NHK8815 GPIO devices dynamically like the Ux500 does it.
Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@li
ARM: nomadik: register GPIOs dynamically
Register the NHK8815 GPIO devices dynamically like the Ux500 does it.
Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v3.2, v3.2-rc7 |
|
#
53d68af1 |
| 18-Dec-2011 |
Russell King <rmk+kernel@arm.linux.org.uk> |
ARM: amba: nomadik: use common amba device initializers
Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.l
ARM: amba: nomadik: use common amba device initializers
Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
show more ...
|
Revision tags: v3.2-rc6, v3.2-rc5, v3.2-rc4 |
|
#
35b47a40 |
| 28-Nov-2011 |
Russell King <rmk+kernel@arm.linux.org.uk> |
ARM: restart: nomadik: use new restart hook
Hook the Nomadik NHK platform restart code into the new restart hook.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
61b38753 |
| 28-Nov-2011 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: 7179/1: nomadik: localize cpu-8815 header
The symbols from cpu-8815.c were being broadcast across the entire kernel but are only really used locally in mach-nomadik so let's localize them.
Sig
ARM: 7179/1: nomadik: localize cpu-8815 header
The symbols from cpu-8815.c were being broadcast across the entire kernel but are only really used locally in mach-nomadik so let's localize them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
show more ...
|
Revision tags: v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3 |
|
#
0f332861 |
| 22-Aug-2011 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: 7032/1: plat-nomadik: break out GPIO driver specifics
The <[plat|mach]/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and d
ARM: 7032/1: plat-nomadik: break out GPIO driver specifics
The <[plat|mach]/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file.
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
show more ...
|
Revision tags: v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1 |
|
#
ba327b1e |
| 26-May-2010 |
Linus Walleij <linus.walleij@stericsson.com> |
ARM: 6145/1: ux500 MTU clockrate correction
This adjusts the clockrate for the MTU timer. On the different UX500 variants this rate is different. The platform can also have been set up at hardware i
ARM: 6145/1: ux500 MTU clockrate correction
This adjusts the clockrate for the MTU timer. On the different UX500 variants this rate is different. The platform can also have been set up at hardware initialization, bootloader or early init for different clock speeds. To have the clock framework available early so the timers can use them, the clock initialization for Nomadik and ux500 is moved to IRQ init time. A custom per-clock callback is added to handle special cases like this.
This solves a user-visible bug: without this patch the current UX500 platforms will not be synchronized to wall-clock time and the platform will drift in time.
Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
show more ...
|
Revision tags: v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1 |
|
#
3e3c62ca |
| 02-Mar-2010 |
Rabin Vincent <rabin.vincent@stericsson.com> |
ARM: 5972/1: nomadik-gpio: convert to platform driver
On the U8500 platform there are four GPIO blocks, each with a 4K address space, including the peripheral identification. However, each of these
ARM: 5972/1: nomadik-gpio: convert to platform driver
On the U8500 platform there are four GPIO blocks, each with a 4K address space, including the peripheral identification. However, each of these blocks have a varying number of banks, each of which have 32 GPIOs and an interrupt line.
The current nomadik-gpio driver implementation can handle each of these sub-banks easily with one instance each, but cannot as-is be hooked up to them because it is an AMBA driver and it expects to see a peripheral with the appropriate peripheral ids but having only one bank and only one interrupt.
Solve this by converting the driver to a platform driver.
Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
show more ...
|
Revision tags: v2.6.33, v2.6.33-rc8, v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2 |
|
#
d2392ba0 |
| 19-Dec-2009 |
Alessandro Rubini <rubini@unipv.it> |
hwrng: nomadik - Add platform device for rng in cpu-8815
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Acked-by: Matt Mackall <mpm@selenic.c
hwrng: nomadik - Add platform device for rng in cpu-8815
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
show more ...
|
Revision tags: v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4, v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2 |
|
#
0b260fd4 |
| 02-Jul-2009 |
Alessandro Rubini <rubini@gnudd.com> |
[ARM] 5587/1: nomadik: add l2cc
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
2ec1d359 |
| 02-Jul-2009 |
Alessandro Rubini <rubini@gnudd.com> |
[ARM] 5584/1: nomadik: add gpio driver and devices
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm
[ARM] 5584/1: nomadik: add gpio driver and devices
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
show more ...
|
#
28ad94ec |
| 02-Jul-2009 |
Alessandro Rubini <rubini@gnudd.com> |
[ARM] 5590/1: Add basic support for ST Nomadik 8815 SoC and evaluation board
This patch adds the basic infrastructure for the Nomadik 8815 CPU and the "Nomadik Hardware Kit" NHK8815. This patch only
[ARM] 5590/1: Add basic support for ST Nomadik 8815 SoC and evaluation board
This patch adds the basic infrastructure for the Nomadik 8815 CPU and the "Nomadik Hardware Kit" NHK8815. This patch only includes the serial console and core stuff, no drivers.
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
show more ...
|
Revision tags: v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
1a59d1b8 |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it u
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5 |
|
#
98badfd3 |
| 27-Jul-2015 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: nomadik: move l2x0 setup to device tree The cache setup magic value in the Nomadik machine is plain wrong, the correct settings can be done using device tree in accordance with
ARM: nomadik: move l2x0 setup to device tree The cache setup magic value in the Nomadik machine is plain wrong, the correct settings can be done using device tree in accordance with the settings from ST's own port. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
show more ...
|
Revision tags: v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6 |
|
#
4cec8cd7 |
| 30-May-2015 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: nomadik: move hog code to use DT hogs Instead of introducing a board-specific DT node for biasing the MMC/SD and SATA ports, use the new device tree hogs. Signed-off-by: Li
ARM: nomadik: move hog code to use DT hogs Instead of introducing a board-specific DT node for biasing the MMC/SD and SATA ports, use the new device tree hogs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
show more ...
|