ARM: mmp: append brownstone support

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

ARM: pxa168: added support for Teton BGA platform

Added board defintion, header, and debug UART support.

Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao

ARM: pxa168: added support for Teton BGA platform

Added board defintion, header, and debug UART support.

Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

show more ...

[ARM] mmp: support jasper development board

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

[ARM] mmp: add support for Marvell MMP2

Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's
ARMv6 compatible. Support basic interrupt handler and timer,
and basic support for MMP2 based F

[ARM] mmp: add support for Marvell MMP2

Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's
ARMv6 compatible. Support basic interrupt handler and timer,
and basic support for MMP2 based FLINT platform.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

show more ...

[ARM] mmp: rename irq.c to irq-pxa168.c to allow other SoC IRQ chips

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

[ARM] mmp: avengers lite (pxa168) board bring up

Signed-off-by: Gavin Gu <gavin.gu@marvell.com>
Signed-off-by: Jing Xiang <jxiang@marvell.com>
Signed-off-by: Jack Ren <jack.ren@marvell.com>
Signed-o

[ARM] mmp: avengers lite (pxa168) board bring up

Signed-off-by: Gavin Gu <gavin.gu@marvell.com>
Signed-off-by: Jing Xiang <jxiang@marvell.com>
Signed-off-by: Jack Ren <jack.ren@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

show more ...

[ARM] pxa: add base support for pxa910-based TTC_DKB

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

[ARM] pxa: add base support for pxa910-based TavorEVB

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

[ARM] pxa: add base support for Marvell PXA910

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

[ARM] pxa: add base support for Marvell's PXA168 processor line

"""The Marvell® PXA168 processor is the first in a family of application
processors targeted at mass market opportunities in computing

[ARM] pxa: add base support for Marvell's PXA168 processor line

"""The Marvell® PXA168 processor is the first in a family of application
processors targeted at mass market opportunities in computing and consumer
devices. It balances high computing and multimedia performance with low
power consumption to support extended battery life, and includes a wealth
of integrated peripherals to reduce overall BOM cost .... """

See http://www.marvell.com/featured/pxa168.jsp for more information.

1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core,
there are many enhancements like instructions for flushing the
whole D-cache, and so on

2. Clock reuses Russell's common clkdev, and added the basic support
for UART1/2.

3. Devices are a bit different from the 'mach-pxa' way, the platform
devices are now dynamically allocated only when necessary (i.e.
when pxa_register_device() is called). Description for each device
are stored in an array of 'struct pxa_device_desc'. Now that:

a. this array of device description is marked with __initdata and
can be freed up system is fully up

b. which means board code has to add all needed devices early in
his initializing function

c. platform specific data can now be marked as __initdata since
they are allocated and copied by platform_device_add_data()

4. only the basic UART1/2/3 are added, more devices will come later.

Signed-off-by: Jason Chagas <chagas@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

show more ...

ARM: mmp: Remove legacy clk code

Remove all the legacy clk code that supports a non-common clk framework
implementation of 'struct clk' in mach-mmp. This code doesn't look to be
comp

ARM: mmp: Remove legacy clk code

Remove all the legacy clk code that supports a non-common clk framework
implementation of 'struct clk' in mach-mmp. This code doesn't look to be
compiled anymore given that the MMP is fully supported in the
multi-platform config via ARCH_MULTIPLATFORM as of commit 377524dc4d77
("ARM: mmp: move into ARCH_MULTIPLATFORM"). The ARCH_MULTIPLATFORM
config selects COMMON_CLK and therefore the Makefile rule can never
actually compile the code in these files.

Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200409064416.83340-9-sboyd@kernel.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
[sboyd@kernel.org: Squash in a clock.h include removal found by Stephen
Rothwell <sfr@canb.auug.org.au>]

show more ...

ARM: mmp: add SMP support

Used to bring up the second core on MMP3.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

ARM: mmp: add support for MMP3 SoC

Similar to MMP2, which this patch is based on. Known differencies from MMP2
are:

* Two PJ4B cores instead of one PJ4
* Tauros 3 L2 cache c

ARM: mmp: add support for MMP3 SoC

Similar to MMP2, which this patch is based on. Known differencies from MMP2
are:

* Two PJ4B cores instead of one PJ4
* Tauros 3 L2 cache controller instead of Tauros 2
* A GIC interrupt controller optionally used instead of the MMP one
* A TWD local timer
* Different USB2 PHY
* A USB3 SS controller
* More interrupt muxes

Hard to tell what else is different, because documentation is not
available.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ARM: mmp: move into ARCH_MULTIPLATFORM

With all dependencies taken care of, this enables building
the Marvell mmp platform as part of ARCH_MULTIPLATFORM, along
with other ARMv5 and A

ARM: mmp: move into ARCH_MULTIPLATFORM

With all dependencies taken care of, this enables building
the Marvell mmp platform as part of ARCH_MULTIPLATFORM, along
with other ARMv5 and ARMv7 platforms.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>

show more ...

ARM: mmp: build sram driver alone

sram driver can be used by many chips besides CPU_MMP2, and so build
it alone. Also need to select MMP_SRAM for MMP_TDMA driver.

Reported-by: D

ARM: mmp: build sram driver alone

sram driver can be used by many chips besides CPU_MMP2, and so build
it alone. Also need to select MMP_SRAM for MMP_TDMA driver.

Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

irqchip: move mmp irq driver

Move irq-mmp driver from mach-mmp directory into irqchip directory.
It's used to support multiple platform.

Signed-off-by: Haojian Zhuang <haojian.z

irqchip: move mmp irq driver

Move irq-mmp driver from mach-mmp directory into irqchip directory.
It's used to support multiple platform.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

show more ...

ARM: mmp: move mmp2 clock definition to separated file

move mmp2 clock definition to another file. Then mmp2 can
choose common clock framework or private clock framework.

Signed

ARM: mmp: move mmp2 clock definition to separated file

move mmp2 clock definition to another file. Then mmp2 can
choose common clock framework or private clock framework.

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

show more ...

arm: mmp: move pxa910 clock definition to separated file

move pxa910 clock definition to another file. Then pxa910 can
choose common clock framework or private clock framework.

arm: mmp: move pxa910 clock definition to separated file

move pxa910 clock definition to another file. Then pxa910 can
choose common clock framework or private clock framework.

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

show more ...

arm: mmp: move pxa168 clock definition to separated file

move pxa168 clock definition to another file. Then pxa168 can
choose common clock framework or private clock framework.

arm: mmp: move pxa168 clock definition to separated file

move pxa168 clock definition to another file. Then pxa168 can
choose common clock framework or private clock framework.

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

show more ...

arm: mmp: make private clock definition exclude from common clock

the clock.c is mmp private implementation, make it excluded
from common clock framework

Signed-off-by: Chao Xie

arm: mmp: make private clock definition exclude from common clock

the clock.c is mmp private implementation, make it excluded
from common clock framework

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

show more ...

ARM: mmp: add pm support for pxa910

add suspend/resume functionality for pxa910

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Raul Xiong <xjian@marvell.com>

ARM: mmp: add pm support for pxa910

add suspend/resume functionality for pxa910

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Raul Xiong <xjian@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

show more ...

ARM: mmp: add PM support for mmp2

MMP2 can enter system sleep level during suspend.
It can be waken up by PMIC interrupt, RTC/ALARM.

Signed-off-by: Chao Xie <chao.xie@marvell.co

ARM: mmp: add PM support for mmp2

MMP2 can enter system sleep level during suspend.
It can be waken up by PMIC interrupt, RTC/ALARM.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

show more ...

ARM: mmp: support mmp2 with device tree

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

ARM: mmp: support DT in irq

Merge irq-pxa168 and irq-mmp2. And support device tree also.

Since CONFIG_SPARSE_IRQ is enabled in arch-mmp, base irq starts from
NR_IRQS_LEGACY.

ARM: mmp: support DT in irq

Merge irq-pxa168 and irq-mmp2. And support device tree also.

Since CONFIG_SPARSE_IRQ is enabled in arch-mmp, base irq starts from
NR_IRQS_LEGACY.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

show more ...