ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b

select MESON_IRQ_GPIO in Kconfig for Amlogic's meson8b SoC

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-of

ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b

select MESON_IRQ_GPIO in Kconfig for Amlogic's meson8b SoC

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM: meson: Add SMP bringup code for Meson8 and Meson8b

This adds the necessary SMP-operations and startup code to use the
additional cores on the Amlogic Meson8/Meson8m2 (both are using

ARM: meson: Add SMP bringup code for Meson8 and Meson8b

This adds the necessary SMP-operations and startup code to use the
additional cores on the Amlogic Meson8/Meson8m2 (both are using the same
sequence) and Meson8b (using a slightly difference sequence) SoCs.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
[add Meson8/Meson8m2 support and allow taking CPU cores offline as well]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm: meson: select the clock controller for Meson8

Select COMMON_CLK_MESON8B also for MACH_MESON8 since the Meson8b clock
controller driver can also be used on Meson8 SoCs now that we ha

arm: meson: select the clock controller for Meson8

Select COMMON_CLK_MESON8B also for MACH_MESON8 since the Meson8b clock
controller driver can also be used on Meson8 SoCs now that we have a
separate compatible for it.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm: meson: explicitly select clk drivers

The AmLogic clock controller code is used by both arm and arm64
architectures. Explicitly select the core code for all Meson (32-bit
arm) bu

arm: meson: explicitly select clk drivers

The AmLogic clock controller code is used by both arm and arm64
architectures. Explicitly select the core code for all Meson (32-bit
arm) builds, and also select the Meson8b driver when that machine is
built.

Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB

This replaces:

- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
now be selected directly.

- "s

ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB

This replaces:

- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
now be selected directly.

- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
is now selectable by everyone, so we need not declare our
intent to select it.

When ordering the symbols the following rationale was used:
if the selects were in alphabetical order, I moved select GPIOLIB
to be in alphabetical order, but if the selects were not
maintained in alphabetical order, I just replaced
"select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB".

Cc: Michael Büsch <m@bues.ch>
Cc: arm@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: use "depends on" for SoC configs instead of "if" after prompt

Many ARM sub-architectures use prompts followed by "if" conditional,
but it is wrong.

Please notice the differ

ARM: use "depends on" for SoC configs instead of "if" after prompt

Many ARM sub-architectures use prompts followed by "if" conditional,
but it is wrong.

Please notice the difference between

config ARCH_FOO
bool "Foo SoCs" if ARCH_MULTI_V7

and

config ARCH_FOO
bool "Foo SoCs"
depends on ARCH_MULTI_V7

These two are *not* equivalent!

In the former statement, it is not ARCH_FOO, but its prompt that
depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO
is selected by another, but ARCH_MULTI_V7 is still disabled. As it is
not unmet dependency, Kconfig never warns. This is probably not what
you want.

The former should be used only when you need to do so, and you really
understand what you are doing. (In most cases, it should be wrong!)

For enabling/disabling sub-architectures, the latter is always correct.

As a good side effect, this commit fixes some entries over 80 columns
(mach-imx, mach-integrator, mach-mbevu).

[Arnd: I note that there is not really a bug here, according to
the discussion that followed, but I can see value in being consistent
and in making the lines shorter]

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Krzysztof Halasa <khc@piap.pl>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: meson: Enable Meson8b SoCs

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: meson: select PINCTRL_MESON and ARCH_REQUIRE_GPIOLIB

Make sure that the Meson pinctrl driver is built whenever Meson
support is enabled.

Signed-off-by: Beniamino Galvani <b

ARM: meson: select PINCTRL_MESON and ARCH_REQUIRE_GPIOLIB

Make sure that the Meson pinctrl driver is built whenever Meson
support is enabled.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

ARM: meson: enable L2 cache

This enables the L2 cache controller available in Amlogic SoCs.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Acked-by: Arnd Bergmann <arnd@

ARM: meson: enable L2 cache

This enables the L2 cache controller available in Amlogic SoCs.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Carlo Caione <carlo@caione.org>

show more ...

ARM: meson: add meson8 support

Add a MACH_MESON8 symbol and add "amlogic,meson8" to the list of
compatible strings for the Meson DT machine to support devices based
on the Meson8 fam

ARM: meson: add meson8 support

Add a MACH_MESON8 symbol and add "amlogic,meson8" to the list of
compatible strings for the Meson DT machine to support devices based
on the Meson8 family of SoCs.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Carlo Caione <carlo@caione.org>

show more ...

ARM: meson: add basic support for MesonX SoCs

This patch adds the basic machine file for the MesonX SoCs. Only Meson6
is populated.

Signed-off-by: Carlo Caione <carlo@caione.org

ARM: meson: add basic support for MesonX SoCs

This patch adds the basic machine file for the MesonX SoCs. Only Meson6
is populated.

Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...