ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs

Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs.
Since OTP values might be required by drivers required during
boot, make sure the

ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs

Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs.
Since OTP values might be required by drivers required during
boot, make sure the driver is built-in (e.g. i.MX thermal
driver).

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: multi_v7_defconfig: configure I2C driver built-in

PMIC often require the I2C bus, and the PMIC regulators might be
necessary to power on eMMC/SD-card or other supplies required
for successful b

ARM: multi_v7_defconfig: configure I2C driver built-in

PMIC often require the I2C bus, and the PMIC regulators might be
necessary to power on eMMC/SD-card or other supplies required
for successful boot. Make sure I2C driver for i.MX devices is
built-in.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules

We need the CPCAP MFD and regulator built-in for UART console to work,
the rest can be loadable modules. Note that us

ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules

We need the CPCAP MFD and regulator built-in for UART console to work,
the rest can be loadable modules. Note that users probably want to also
enable serial 8250_OMAP that is not yet enabled by default.

Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: multi_v7_defconfig: Enable USB gadget configfs as loadable module

With USB OTG now enabled, it makes sense to allow configuring the
USB gadgets via configfs.

Signed-off-by: Tony Lindgren <tony

ARM: multi_v7_defconfig: Enable USB gadget configfs as loadable module

With USB OTG now enabled, it makes sense to allow configuring the
USB gadgets via configfs.

Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants

With MUSB USB OTG controller enabled, let's now enable the USB PHYs
found on omap varian SoCs.

Signed-off-by: Tony Lindgren <

ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants

With MUSB USB OTG controller enabled, let's now enable the USB PHYs
found on omap varian SoCs.

Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules

We can support USB OTG with MUSB driver on many ARM SoCs. Let's
enable all the SoCs with MUSB as loadable modules. And let's enable
t

ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules

We can support USB OTG with MUSB driver on many ARM SoCs. Let's
enable all the SoCs with MUSB as loadable modules. And let's enable
their related DMA hardware.

And as MUSB is an USB OTG controller, let's enable OTG support too.

Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP

Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7/k2g based SoC's
can use sdhci-omap for eMMC/SD/SDIO controller..

Signed-off-by: Kishon Vijay Abr

ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP

Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7/k2g based SoC's
can use sdhci-omap for eMMC/SD/SDIO controller..

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: multi_v7_defconfig: Enable thermal driver for RPi 2/3

This turns on the CONFIG_BCM2835_THERMAL as module for
Raspberry Pi 2 and 3.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-

ARM: multi_v7_defconfig: Enable thermal driver for RPi 2/3

This turns on the CONFIG_BCM2835_THERMAL as module for
Raspberry Pi 2 and 3.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

show more ...

ARM: configs: multi_v7: add stm32 support

This patch adds stm32 support to multi_v7_defconfig

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@s

ARM: configs: multi_v7: add stm32 support

This patch adds stm32 support to multi_v7_defconfig

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

show more ...

ARM: multi_v7_defconfig: Enable serial console on RPi 3

The Raspberry Pi 3 uses the 8250-based auxilary UART of the BCM2837 SoC
as the primary serial console of the board, so enable it in the
multip

ARM: multi_v7_defconfig: Enable serial console on RPi 3

The Raspberry Pi 3 uses the 8250-based auxilary UART of the BCM2837 SoC
as the primary serial console of the board, so enable it in the
multiplatform defconfig.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>

show more ...

irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUG

CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS,
just with less information.

Spring cleanup time.

Signed-off-by: Marc Zyngier <marc.zyngier

irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUG

CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS,
just with less information.

Spring cleanup time.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shunyong <shunyong.yang@hxt-semitech.com>
Link: https://lkml.kernel.org/r/20180117142647.23622-1-marc.zyngier@arm.com

show more ...

ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)

Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mo

ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)

Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: multi_v7_defconfig: Select PWM_RCAR as module

Enable PWM support for R-Car and friends by default.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.d

ARM: multi_v7_defconfig: Select PWM_RCAR as module

Enable PWM support for R-Car and friends by default.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards

Enable following drivers for recently merged devices:
- CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDM

ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards

Enable following drivers for recently merged devices:
- CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI
- Sii9234 DRM HDMI-MHL bridge for Trats2
- dedicated Odroid ASoC machine driver for Odroid XU3/XU4

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

show more ...

ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module

The RPMSG_VIRTIO is now user selectable option so we explicitly
select it in multi_v7_defconfig. Till now RPMSG_VIRTIO was
selected by ST_REMOT

ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module

The RPMSG_VIRTIO is now user selectable option so we explicitly
select it in multi_v7_defconfig. Till now RPMSG_VIRTIO was
selected by ST_REMOTEPROC=m in multi_v7_defconfig.

Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER

Enable the GPIO controller driver used for UniPhier SoC family.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Ar

ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER

Enable the GPIO controller driver used for UniPhier SoC family.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: multi_v7_defconfig: Enable CONFIG_ARCH_BCM_HR2

Turn on Broadcom Hurrican 2 SoC support by default to get access to its
drivers.

Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Flor

ARM: multi_v7_defconfig: Enable CONFIG_ARCH_BCM_HR2

Turn on Broadcom Hurrican 2 SoC support by default to get access to its
drivers.

Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

ARM: multi_v7_defconfig: enable the Meson MX SDIO/MMC controller

This enables the new Amlogic Meson MX SDIO/MMC controller driver, which
typically connects to the SD card and SDIO wifi module.
The d

ARM: multi_v7_defconfig: enable the Meson MX SDIO/MMC controller

This enables the new Amlogic Meson MX SDIO/MMC controller driver, which
typically connects to the SD card and SDIO wifi module.
The driver is enabled as built-in to allow booting from the SD card.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM: multi_v7_defconfig: Enable UAS support for Odroid HC1 board

Odroid HC1 board has built-in JMicron USB to SATA bridge, which supports
UAS protocol. Enable support for it to make sure that all bu

ARM: multi_v7_defconfig: Enable UAS support for Odroid HC1 board

Odroid HC1 board has built-in JMicron USB to SATA bridge, which supports
UAS protocol. Enable support for it to make sure that all built-in storage
devices are available. Enable it as module to keep in line with multi_v7
policy to enable drivers as build-in only if they are critical for boot
process. On Odroid HC1 the kernel itself has to be still read from the
SD-card, so assume that modules/initrd is also accessible there.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

show more ...

ARM: multi_v7_defconfig: Enable USB3503 driver

The Odroid U3 (Exynos 4412 based) for instance needs this driver,
otherwise its USB hub will not come up.

Also selecting it as built-in to allow booti

ARM: multi_v7_defconfig: Enable USB3503 driver

The Odroid U3 (Exynos 4412 based) for instance needs this driver,
otherwise its USB hub will not come up.

Also selecting it as built-in to allow booting from USB without
an initrd/initramfs.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

show more ...

ARM: multi_v7_defconfig: Enable BQ32000 RTC driver

The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000).
To increase hardware support enable the driver in the
multi_v7_defconfig multiplatform configura

ARM: multi_v7_defconfig: Enable BQ32000 RTC driver

The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000).
To increase hardware support enable the driver in the
multi_v7_defconfig multiplatform configuration.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: multi_v7_defconfig: make eSDHC driver built-in

Sometimes root file system is deployed on SD card. It's
proper to build eSDHC driver into kernel.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Ac

ARM: multi_v7_defconfig: make eSDHC driver built-in

Sometimes root file system is deployed on SD card. It's
proper to build eSDHC driver into kernel.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig

This selects both the Tegra20 and Tegra30 I2S interfaces (that were
previously auto-selected by Kconfig but are not anymore) to
multi_v7_

ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig

This selects both the Tegra20 and Tegra30 I2S interfaces (that were
previously auto-selected by Kconfig but are not anymore) to
multi_v7_defconfig, as modules.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL

Turn on CONFIG_BRCMSTB_THERMAL as module.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

multi_v7_defconfig: Make rockchip PHY built-in

Enable the rockchip PHY driver for multi_v7_defconfig builds.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@

multi_v7_defconfig: Make rockchip PHY built-in

Enable the rockchip PHY driver for multi_v7_defconfig builds.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...