ARM: exynos_defconfig: Enable USB Video Class support

The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a built-in
Silicon Motion USB UVC WebCam. Enable support for the USB Vi

ARM: exynos_defconfig: Enable USB Video Class support

The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a built-in
Silicon Motion USB UVC WebCam. Enable support for the USB Video Class
driver and its needed media Kconfig symbols so the camera is supported.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull late ARM SoC updates from Kevin Hilman:
"This is a collection of a few late fixes and other mis

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull late ARM SoC updates from Kevin Hilman:
"This is a collection of a few late fixes and other misc stuff that had
dependencies on things being merged from other trees.

The bulk of the changes are for samsung/exynos SoCs for some changes
that needed a few minor reworks so ended up a bit late. The others
are mainly for qcom SoCs: a couple fixes and some DTS updates"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
ARM: multi_v7_defconfig: Enable PBIAS regulator
soc: qcom: smd: Correct fBLOCKREADINTR handling
soc: qcom: smd: Use correct remote processor ID
soc: qcom: smem: Fix errant private access
ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path
ARM: dts: qcom: msm8960-cdp: Use stdout-path
ARM: dts: qcom: msm8660-surf: Use stdout-path
ARM: dts: qcom: ipq8064-ap148: Use stdout-path
ARM: dts: qcom: apq8084-mtp: Use stdout-path
ARM: dts: qcom: apq8084-ifc6540: Use stdout-path
ARM: dts: qcom: apq8074-dragonboard: Use stdout-path
ARM: dts: qcom: apq8064-ifc6410: Use stdout-path
ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path
ARM: dts: qcom: Label serial nodes for aliasing and stdout-path
reset: ath79: Fix missing spin_lock_init
reset: Add (devm_)reset_control_get stub functions
ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12
cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o
ARM: dts: add iommu property to JPEG device for exynos4
ARM: dts: enable SPI1 for exynos4412-odroidu3
...

show more ...

drm/bridge: Add vendor prefixes

Use vendor prefixes for Kconfig symbols and filenames. This should make
it easier to identify the various bridge drivers and to organize the
directory

drm/bridge: Add vendor prefixes

Use vendor prefixes for Kconfig symbols and filenames. This should make
it easier to identify the various bridge drivers and to organize the
directory.

v2: fix object name for dw-hdmi (Fabio Estevam)

Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

drm/panel: Add Samsung prefix to panel drivers

The likelihood of getting a large number of panel drivers from different
vendors is quite high. Add a prefix to the two existing Samsung pa

drm/panel: Add Samsung prefix to panel drivers

The likelihood of getting a large number of panel drivers from different
vendors is quite high. Add a prefix to the two existing Samsung panel
drivers to set a guideline for future patch submissions. Using vendor
prefixes consistently should allow a cleaner organization of the tree.

Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

ARM: exynos_defconfig: Enable cpufreq-dt driver

With the latest patches the cpufreq-dt can be used on multiple
Exynos SoCs: 3250, 4210, 4212, 4412 and 5250.

Enable it along with

ARM: exynos_defconfig: Enable cpufreq-dt driver

With the latest patches the cpufreq-dt can be used on multiple
Exynos SoCs: 3250, 4210, 4212, 4412 and 5250.

Enable it along with default ondemand governor to conserve the energy,
reduce temperature while maintaining acceptable performance.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable NTC Thermistors support

The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have
IIO based ADC thermistors. Enable built-in support for its driver.

ARM: exynos_defconfig: Enable NTC Thermistors support

The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have
IIO based ADC thermistors. Enable built-in support for its driver.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3

Enable CONFIG_SND_SOC_ODROIDX2 and CONFIG_SND_SIMPLE_CARD to enable
sound on Odroid-XU3 board using the max98090 audi

ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3

Enable CONFIG_SND_SOC_ODROIDX2 and CONFIG_SND_SIMPLE_CARD to enable
sound on Odroid-XU3 board using the max98090 audio codec.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for Odroid-XU3

Odroid-XU3 board support power monitor sensor.

Below is the output of boot log.
[ 3.241438] ina2xx 0-0040:

ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for Odroid-XU3

Odroid-XU3 board support power monitor sensor.

Below is the output of boot log.
[ 3.241438] ina2xx 0-0040: power monitor ina231 (Rshunt = 10000 uOhm)
[ 3.248068] ina2xx 0-0041: power monitor ina231 (Rshunt = 10000 uOhm)
[ 3.254724] ina2xx 0-0044: power monitor ina231 (Rshunt = 10000 uOhm)
[ 3.261354] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm)

ina231-i2c-0-40
Adapter: s3c2410-i2c
in0: +0.00 V
in1: +1.01 V
power1: 175.00 mW
curr1: +0.18 A

ina231-i2c-0-41
Adapter: s3c2410-i2c
in0: +0.00 V
in1: +1.21 V
power1: 50.00 mW
curr1: +0.04 A

ina231-i2c-0-44
Adapter: s3c2410-i2c
in0: +0.00 V
in1: +1.02 V
power1: 50.00 mW
curr1: +0.04 A

ina231-i2c-0-45
Adapter: s3c2410-i2c
in0: +0.00 V
in1: +1.04 V
power1: 75.00 mW
curr1: +0.07 A

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for Odroid-XU3

Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan
power on Odroid-XU3.

Signed-off-by: Anand Mo

ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for Odroid-XU3

Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan
power on Odroid-XU3.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: savedefconfig

This patch does 'savedefconfig' for exynos_defconfig to remove useless
configs and check its dependencies. Sometimes some configs could be
ignore

ARM: exynos_defconfig: savedefconfig

This patch does 'savedefconfig' for exynos_defconfig to remove useless
configs and check its dependencies. Sometimes some configs could be
ignored because of the dependencies even they are enabled in defconfig
file manually. So checking the dependencies would be better.

Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable display on Trats2 board

Enable the Exynos DSI and S6E8AA0 panel for full X11 display on Trats2.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung

ARM: exynos_defconfig: Enable display on Trats2 board

Enable the Exynos DSI and S6E8AA0 panel for full X11 display on Trats2.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable HDMI support

Many Exynos boards have an HDMI port so enable Exynos DRM HDMI
support.

Signed-off-by: Javier Martinez Canillas <javier.martinez@colla

ARM: exynos_defconfig: Enable HDMI support

Many Exynos boards have an HDMI port so enable Exynos DRM HDMI
support.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable options to mount a rootfs via NFS

This patch enables the options to mount a rootfs over NFS and also
support for automatic configuration of IP addresses dur

ARM: exynos_defconfig: Enable options to mount a rootfs via NFS

This patch enables the options to mount a rootfs over NFS and also
support for automatic configuration of IP addresses during boot as
needed by NFS.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable ChromeOS EC chardev driver

Exynos Chromebooks have an Embedded Controller known as the ChromeOS EC
Enable the driver that provides an interface to access fr

ARM: exynos_defconfig: Enable ChromeOS EC chardev driver

Exynos Chromebooks have an Embedded Controller known as the ChromeOS EC
Enable the driver that provides an interface to access from user-space.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable CPU idle

Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top
Running) mode on Exynos 4210 (coupled), Exynos 4x12 and Exynos 5250.
Enable

ARM: exynos_defconfig: Enable CPU idle

Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top
Running) mode on Exynos 4210 (coupled), Exynos 4x12 and Exynos 5250.
Enable it in default configuration to reduce energy consumption.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable Marvell WiFi-Ex support

Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a MMC/SDIO
Marvell WiFi-Ex chip. This patch enables wireless support and th

ARM: exynos_defconfig: Enable Marvell WiFi-Ex support

Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a MMC/SDIO
Marvell WiFi-Ex chip. This patch enables wireless support and the
mwifiex driver.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Disable IOMMU support

Enabling Exynos DRM IOMMU support for Exynos is currently broken and
causes a BUG on exynos-iommu driver. This was not an issue since the

ARM: exynos_defconfig: Disable IOMMU support

Enabling Exynos DRM IOMMU support for Exynos is currently broken and
causes a BUG on exynos-iommu driver. This was not an issue since the
options was disabled in exynos_defconfig but after commit 8dcc14f82f06
("drm/exynos: IOMMU support should not be selectable by user"), it is
selected if EXYNOS_IOMMU is enabled which is in exynos_defconfig.

So a kernel built using exynos_defconfig after the mentioned commit
fails to boot [0]. Disable IOMMU support in Exynos defconfig until
things get sorted out.

[0]:
[ 1.242183] ------------[ cut here ]------------
[ 1.246191] kernel BUG at drivers/iommu/exynos-iommu.c:481!
[ 1.251747] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[ 1.257561] Modules linked in:
[ 1.260603] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.19.0-07478-g796e1c55717e #490
[ 1.268412] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 1.274489] task: ee06c000 ti: ee05a000 task.ti: ee05a000
[ 1.279874] PC is at __exynos_sysmmu_enable+0x184/0x190
[ 1.285080] LR is at exynos_iommu_attach_device+0x44/0xb0
[ 1.290461] pc : [<c0254a14>] lr : [<c0254a64>] psr: 60000193
[ 1.290461] sp : ee05bcf8 ip : 00000000 fp : ed84aa40
[ 1.301916] r10: ed84a890 r9 : a0000113 r8 : 6db30000
[ 1.307125] r7 : ed84aa40 r6 : 00000000 r5 : 00000000 r4 : ee174e10
[ 1.313635] r3 : 6db30000 r2 : ed84aa40 r1 : 6db30000 r0 : ee174e10
[ 1.320147] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 1.327524] Control: 10c5387d Table: 4000406a DAC: 00000015
[ 1.333252] Process swapper/0 (pid: 1, stack limit = 0xee05a210)
[ 1.339241] Stack: (0xee05bcf8 to 0xee05c000)
[ 1.343581] bce0: 6db30000 ee174e10
[ 1.351741] bd00: ed84a880 00000000 ed84aa40 ee174e10 a0000113 ed84a890 00000000 c0254a64
[ 1.359900] bd20: 00000000 6db30000 ee174e10 ed84adc0 00000005 00000034 00000001 c0692c1c
[ 1.368059] bd40: 00000097 c02526c8 ee29f050 c0017210 ee29f050 ee174e10 edab6810 c0282558
[ 1.376219] bd60: edab6a10 ee1cb000 00000005 c0283520 ee29f240 c028f210 edab6810 ee2ef280
[ 1.384378] bd80: edb24680 ed84a680 ee1cb000 c02883f8 edab6810 ee1cb000 ee1cb000 00000000
[ 1.392537] bda0: ed84a680 ee2ef450 00000000 c027e968 ee1cb000 00000000 00000000 c0268fd4
[ 1.400696] bdc0: edab6800 c06b0de4 ee1cb000 c026a8bc ee2ef0c0 c028f210 00000002 ee2ef460
[ 1.408855] bde0: ee2ef460 00000002 ee2ef280 c0288728 c04af5d0 edab6810 ee2ef280 00000000
[ 1.417014] be00: c06b1348 c0288918 c06b0f00 c06b0f00 edab6810 00000001 c06b0da0 c027eaf4
[ 1.425173] be20: c070334c edaee190 00000000 edab6810 ffffffed c06b0da0 00000000 c028da1c
[ 1.433332] be40: edab6810 c070334c 00000000 c028c5f8 edab6810 c06b0da0 edab6844 00000000
[ 1.441492] be60: eda3c740 c028c7a4 c06b0da0 00000000 c028c718 c028af74 ee005274 ee3b7b40
[ 1.449652] be80: c06b0da0 ee3b7680 c06b1540 c028bde4 c05b6990 c06b0da0 c0703324 c06b0da0
[ 1.457811] bea0: c0703324 00000000 c069ab18 c028cdc4 00000000 00000000 c0703324 c027ebd8
[ 1.465970] bec0: 00000000 c05b6990 ffffffff 00000000 00000000 00000000 00000000 c00c4574
[ 1.474129] bee0: 00000000 00000000 c069ab18 c027eb1c 00000000 c069ab18 c069ab18 c0008944
[ 1.482288] bf00: 00000036 c04770e8 ee049800 c06eace0 ee06c000 60000113 c069eab0 00000000
[ 1.490447] bf20: 00000000 c069eab0 60000113 00000000 ef7fcabc ef7fcaae c061c594 c0038640
[ 1.498607] bf40: c05cb1d0 c061bc24 00000006 00000006 c069ea50 c06724d4 00000006 c06724b4
[ 1.506766] bf60: c06c7600 c0647588 c0692c1c 00000097 00000000 c0647d40 00000006 00000006
[ 1.514925] bf80: c0647588 c003d2d8 00000000 c046921c 00000000 00000000 00000000 00000000
[ 1.523084] bfa0: 00000000 c0469224 00000000 c000e680 00000000 00000000 00000000 00000000
[ 1.531243] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.539402] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 1.547567] [<c0254a14>] (__exynos_sysmmu_enable) from [<c0254a64>] (exynos_iommu_attach_device+0x44/0xb0)
[ 1.557199] [<c0254a64>] (exynos_iommu_attach_device) from [<c02526c8>] (iommu_attach_device+0x18/0x24)
[ 1.566576] [<c02526c8>] (iommu_attach_device) from [<c0017210>] (arm_iommu_attach_device+0x18/0x50)
[ 1.575690] [<c0017210>] (arm_iommu_attach_device) from [<c0282558>] (drm_iommu_attach_device+0x50/0xb4)
[ 1.585150] [<c0282558>] (drm_iommu_attach_device) from [<c0283520>] (fimd_bind+0x94/0x1b8)
[ 1.593483] [<c0283520>] (fimd_bind) from [<c02883f8>] (component_bind_all+0xb4/0x214)
[ 1.601380] [<c02883f8>] (component_bind_all) from [<c027e968>] (exynos_drm_load+0x9c/0x13c)
[ 1.609802] [<c027e968>] (exynos_drm_load) from [<c0268fd4>] (drm_dev_register+0xa0/0xf4)
[ 1.617960] [<c0268fd4>] (drm_dev_register) from [<c026a8bc>] (drm_platform_init+0x44/0xcc)
[ 1.626293] [<c026a8bc>] (drm_platform_init) from [<c0288728>] (try_to_bring_up_master.part.3+0xc8/0x104)
[ 1.635839] [<c0288728>] (try_to_bring_up_master.part.3) from [<c0288918>] (component_master_add_with_match+0xcc/0x114)
[ 1.646602] [<c0288918>] (component_master_add_with_match) from [<c027eaf4>] (exynos_drm_platform_probe+0xec/0x114)
[ 1.657019] [<c027eaf4>] (exynos_drm_platform_probe) from [<c028da1c>] (platform_drv_probe+0x48/0x98)
[ 1.666221] [<c028da1c>] (platform_drv_probe) from [<c028c5f8>] (driver_probe_device+0x114/0x234)
[ 1.675075] [<c028c5f8>] (driver_probe_device) from [<c028c7a4>] (__driver_attach+0x8c/0x90)
[ 1.683494] [<c028c7a4>] (__driver_attach) from [<c028af74>] (bus_for_each_dev+0x54/0x88)
[ 1.691653] [<c028af74>] (bus_for_each_dev) from [<c028bde4>] (bus_add_driver+0xd8/0x1cc)
[ 1.699812] [<c028bde4>] (bus_add_driver) from [<c028cdc4>] (driver_register+0x78/0xf4)
[ 1.707797] [<c028cdc4>] (driver_register) from [<c027ebd8>] (exynos_drm_init+0xbc/0x110)
[ 1.715956] [<c027ebd8>] (exynos_drm_init) from [<c0008944>] (do_one_initcall+0x80/0x1d0)
[ 1.724117] [<c0008944>] (do_one_initcall) from [<c0647d40>] (kernel_init_freeable+0x108/0x1d4)
[ 1.732796] [<c0647d40>] (kernel_init_freeable) from [<c0469224>] (kernel_init+0x8/0xe4)
[ 1.740869] [<c0469224>] (kernel_init) from [<c000e680>] (ret_from_fork+0x14/0x34)
[ 1.748419] Code: e3403110 11a02001 01a02003 eaffffe4 (e7f001f2)
[ 1.754502] ---[ end trace f58ad362326928d7 ]---

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable support for cpufreq on Exynos SoCs

This commit enables the cpufreq subsystem. Moreover, support
for using CPU as a cooling device is provided.

Sign

ARM: exynos_defconfig: Enable support for cpufreq on Exynos SoCs

This commit enables the cpufreq subsystem. Moreover, support
for using CPU as a cooling device is provided.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable thermal emulation for Exynos TMU

Enabling thermal emulation on Exynos SoCs. New sysfs attribute
- emul_temp is created.

Signed-off-by: Lukasz Majew

ARM: exynos_defconfig: Enable thermal emulation for Exynos TMU

Enabling thermal emulation on Exynos SoCs. New sysfs attribute
- emul_temp is created.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Remove CONFIG_EXYNOS_THERMAL_CORE define

After Exynos TMU rework to use device tree for configuration
this flag can be removed. It is not used anymore.

Si

ARM: exynos_defconfig: Remove CONFIG_EXYNOS_THERMAL_CORE define

After Exynos TMU rework to use device tree for configuration
this flag can be removed. It is not used anymore.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

Merge tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC defconfig changes from Olof Johansson:
"Most of these changes are to enable new

Merge tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC defconfig changes from Olof Johansson:
"Most of these changes are to enable new drivers that have been merged,
or various additions to make defconfigs more useful. There's also a
set of patches trimming down omap2plus kernel size a bit since it is
quite large"

* tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
ARM: config: add DEVTMPFS option by default to keystone config
ARM: multi_v7_defconfig: Enable Exynos5420 Multi-Cluster PM support
ARM: shmobile: Select CONFIG_REGULATOR in defconfig once again
ARM: exynos_defconfig: Enable CONFIG_FHANDLE
ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2
ARM: exynos_defconfig: Enable CONFIG_LOCKUP_DETECTOR
ARM: config: enable ARCH_HIP01
ARM: omap2plus_defconfig: Enable OHCI & EHCI HCD support
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform
ARM: imx_v6_v7_defconfig: enable more USB functions
ARM: imx_v6_v7_defconfig: Select CONFIG_FB_MXS
ARM: omap2plus_defconfig: Enable pcf857x
ARM: omap2plus_defconfig: Add NOR flash support
ARM: omap2plus_defconfig: Enable support for davinci_emac
ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY
ARM: efm32: update defconfig
ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig
ARM: multi_v7_defconfig: Enable Hip01 platform
ARM: config: multi_v7: Update it for Keystone defconfig
ARM: shmobile: Enable kzm9g board in multiplatform defconfig
...

show more ...

ARM: exynos_defconfig: Enable CONFIG_FHANDLE

CONFIG_FHANDLE is required by systemd, which is the default init system
in more and more distributions. So lets enable it for Exynos as well

ARM: exynos_defconfig: Enable CONFIG_FHANDLE

CONFIG_FHANDLE is required by systemd, which is the default init system
in more and more distributions. So lets enable it for Exynos as well
(it's already enabled in multi_v7_defconfig)

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2

Enable drivers for PMICs and MUICs present on Exynos-based devices:
- max14577: charger, extcon, fuel gauge (max

ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2

Enable drivers for PMICs and MUICs present on Exynos-based devices:
- max14577: charger, extcon, fuel gauge (max17040), regulator,
used on: Gear 1, Gear 2,
- max77693: charger, extcon, fuel gauge (max17042),
used on: Trats2,

This allows full usage of charging stack on these devices along with
extcon connector.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable CONFIG_LOCKUP_DETECTOR

On enabling CONFIG_LOCKUP_DETECTOR the kernel to act as a watchdog
to detect hard and soft lockups. Enabling CONFIG_LOCKUP_DETECTOR

ARM: exynos_defconfig: Enable CONFIG_LOCKUP_DETECTOR

On enabling CONFIG_LOCKUP_DETECTOR the kernel to act as a watchdog
to detect hard and soft lockups. Enabling CONFIG_LOCKUP_DETECTOR
don't introduce much overhead on exyons SOC.
(CONFIG_LOCKUP_DETECTOR is enabled on multi_v7_defconfig.)

Tested on Exynos5422 ODROID XU3 board.

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Anand Moon <moon.linux@yahoo.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...

ARM: exynos_defconfig: Enable LM90 driver

multi_v7_defconfig has it as Y already, so build it in here, too, for
consistency, and therefore build in HWMON as well.

Signed-off-by:

ARM: exynos_defconfig: Enable LM90 driver

multi_v7_defconfig has it as Y already, so build it in here, too, for
consistency, and therefore build in HWMON as well.

Signed-off-by: Andreas Faerber <afaerber@suse.de>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

show more ...