|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6 |
|
| #
f06f924a |
| 26-Mar-2020 |
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> |
ARM: bcm2835_defconfig: Enable fixed-regulator
This regulator is now used to control the SD card's power supply on the
Raspberry Pi 4.
Suggested-by: Stefan Wahren <stefan.wahren
ARM: bcm2835_defconfig: Enable fixed-regulator
This regulator is now used to control the SD card's power supply on the
Raspberry Pi 4.
Suggested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200326134458.13992-1-nsaenzjulienne@suse.de
show more ...
|
|
Revision tags: v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21 |
|
| #
93d3ae35 |
| 17-Feb-2020 |
Marek Szyprowski <m.szyprowski@samsung.com> |
ARM: bcm2835_defconfig: add support for Raspberry Pi4
Add drivers needed to boot Raspberry Pi4 board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lo
ARM: bcm2835_defconfig: add support for Raspberry Pi4
Add drivers needed to boot Raspberry Pi4 board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200217155506.5245-1-m.szyprowski@samsung.com
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
show more ...
|
| #
1bba6080 |
| 23-Feb-2020 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
The commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
accidentally dropped the DEBUG FS support in bcm283
ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
The commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
accidentally dropped the DEBUG FS support in bcm2835_defconfig. So
restore the config as before the commit.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
show more ...
|
|
Revision tags: v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10 |
|
| #
4c6f5d40 |
| 12-Jun-2019 |
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> |
ARM: defconfig: enable cpufreq driver for RPi
This enables on both multi_v7_defconfig and bcm2835_defconfig the new
firmware based clock and cpufreq drivers for the Raspberry Pi platform
ARM: defconfig: enable cpufreq driver for RPi
This enables on both multi_v7_defconfig and bcm2835_defconfig the new
firmware based clock and cpufreq drivers for the Raspberry Pi platform.
In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled,
the conservative governor was selected as default since it better
handles the high frequency transition latency.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
show more ...
|
|
Revision tags: v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1 |
|
| #
3337d5cf |
| 07-Mar-2019 |
Alexey Brodkin <alexey.brodkin@synopsys.com> |
configs: get rid of obsolete CONFIG_ENABLE_WARN_DEPRECATED
This Kconfig option was removed during v4.19 development in commit
771c035372a0 ("deprecate the '__deprecated' attribute warnin
configs: get rid of obsolete CONFIG_ENABLE_WARN_DEPRECATED
This Kconfig option was removed during v4.19 development in commit
771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely
and for good") so there's no point to keep it in defconfigs any longer.
FWIW defconfigs were patched with:
--------------------------->8----------------------
find . -name *_defconfig -exec sed -i '/CONFIG_ENABLE_WARN_DEPRECATED/d' {} \;
--------------------------->8----------------------
Link: http://lkml.kernel.org/r/20190128152434.41969-1-abrodkin@synopsys.com
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
|
Revision tags: v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3 |
|
| #
24632d6b |
| 14-Nov-2018 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Enable BCM2835 MMAL-based V4L2 camera driver
This enables the bcm2835-camera driver, which depends on bcm2835-vchiq.
After that we gain more test coverage (e.g. K
ARM: bcm2835_defconfig: Enable BCM2835 MMAL-based V4L2 camera driver
This enables the bcm2835-camera driver, which depends on bcm2835-vchiq.
After that we gain more test coverage (e.g. Kernel CI).
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
show more ...
|
|
Revision tags: v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6 |
|
| #
99fa3b0c |
| 02-Sep-2018 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Enable bcm2835-audio
This enables the bcm2835-audio driver, which depends on bcm2835-vchiq.
After that we gain more test coverage (e.g. Kernel CI).
Signe
ARM: bcm2835_defconfig: Enable bcm2835-audio
This enables the bcm2835-audio driver, which depends on bcm2835-vchiq.
After that we gain more test coverage (e.g. Kernel CI).
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
show more ...
|
|
Revision tags: v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
| #
992f641f |
| 25-May-2018 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Enable RPi voltage sensor
The patch enables the hwmon driver for the Raspberry Pi.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: E
ARM: bcm2835_defconfig: Enable RPi voltage sensor
The patch enables the hwmon driver for the Raspberry Pi.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
show more ...
|
| #
8a14f80a |
| 21-Apr-2018 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Enable VCHIQ driver
In order to gain more test coverage (e.g. Kernel CI) enable
the VCHIQ driver.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
ARM: bcm2835_defconfig: Enable VCHIQ driver
In order to gain more test coverage (e.g. Kernel CI) enable
the VCHIQ driver.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|
| #
17937c75 |
| 21-Apr-2018 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Enable LAN78XX driver
This patch enables the necessary driver for Raspberry Pi 3 B+,
which has a LAN7515 chip.
Signed-off-by: Stefan Wahren <stefan.wahre
ARM: bcm2835_defconfig: Enable LAN78XX driver
This patch enables the necessary driver for Raspberry Pi 3 B+,
which has a LAN7515 chip.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|
|
Revision tags: v4.16 |
|
| #
4e46a858 |
| 25-Feb-2018 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2385_defconfig: Enable BT support for BCM43438
The Raspberry Pi Zero W has an onboard BT chip (BCM43438). So enable the
necessary HCI UART driver (requires serial device bus).
ARM: bcm2385_defconfig: Enable BT support for BCM43438
The Raspberry Pi Zero W has an onboard BT chip (BCM43438). So enable the
necessary HCI UART driver (requires serial device bus).
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|
|
Revision tags: v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12 |
|
| #
6235a80a |
| 23-Jun-2017 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Enable wifi driver for RPi Zero W
This enables the wifi driver for Raspberry Pi Zero W. We need
to build this as a module otherwise the drivers tries to load the
ARM: bcm2835_defconfig: Enable wifi driver for RPi Zero W
This enables the wifi driver for Raspberry Pi Zero W. We need
to build this as a module otherwise the drivers tries to load the
firmware before the root partition is mounted.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|
| #
01bd2f0f |
| 23-Jun-2017 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Increase CMA for VC4
The VC4 needs more memory than the default setting:
cma: cma_alloc: alloc failed, req-size: 4096 pages, ret: -12
vc4-drm soc
ARM: bcm2835_defconfig: Increase CMA for VC4
The VC4 needs more memory than the default setting:
cma: cma_alloc: alloc failed, req-size: 4096 pages, ret: -12
vc4-drm soc:gpu: failed to allocate buffer with size 16777216
So increase the value to 32 MB and fix this issue.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|
| #
651e6d3c |
| 23-Jun-2017 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Enable Mini UART console support
Since pl011 is connected to the BT chip, we need to enable the Mini
UART for serial console.
Signed-off-by: Stefan Wahre
ARM: bcm2835_defconfig: Enable Mini UART console support
Since pl011 is connected to the BT chip, we need to enable the Mini
UART for serial console.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|
| #
3e9aaaf1 |
| 21-May-2017 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Enable serial & ethernet USB gadget support
In order to use the serial and ethernet USB gadget support on
Raspberry Zero, we also need to enable the PHY driver, k
ARM: bcm2835_defconfig: Enable serial & ethernet USB gadget support
In order to use the serial and ethernet USB gadget support on
Raspberry Zero, we also need to enable the PHY driver, kernel module
and OTG support.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2 |
|
| #
51a08de0 |
| 08-Mar-2017 |
Gerd Hoffmann <kraxel@redhat.com> |
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will i
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will improve storage performance.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
show more ...
|
| #
bdd3c254 |
| 04-Mar-2017 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835: Enable missing CMA settings for VC4 driver
Currently bcm2835_defconfig has CMA disabled which makes the
HDMI output on a Raspberry Pi 1 stop working during boot:
ARM: bcm2835: Enable missing CMA settings for VC4 driver
Currently bcm2835_defconfig has CMA disabled which makes the
HDMI output on a Raspberry Pi 1 stop working during boot:
fb: switching to vc4drmfb from simple
Console: switching to colour dummy device 80x30
[drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vc4-drm soc:gpu: failed to allocate buffer with size 9216000
vc4-drm soc:gpu: Failed to set initial hw configuration.
So enable CMA and DMA_CMA in bcm2835_defconfig.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 4400d9ac05ee ("ARM: bcm2835: Enable the VC4 graphics driver in the defconfig")
Reviewed-by: Eric Anholt <eric@anholt.net>
show more ...
|
|
Revision tags: v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31 |
|
| #
bab0cb90 |
| 02-Nov-2016 |
Martin Sperl <kernel@martin.sperl.org> |
ARM: bcm2835: add thermal driver to default config
Add the thermal driver to list of compiled modules in the default
config for bcm2835.
Signed-off-by: Martin Sperl <kernel@mart
ARM: bcm2835: add thermal driver to default config
Add the thermal driver to list of compiled modules in the default
config for bcm2835.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|
|
Revision tags: v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7 |
|
| #
3652bb35 |
| 31-Mar-2016 |
Eric Anholt <eric@anholt.net> |
ARM: bcm2835: Enable NFS root support.
This is also present in multi_v7_defconfig, and means that I can test
the pi1 with the 2835 defconfig in my normal environment.
Signed-off
ARM: bcm2835: Enable NFS root support.
This is also present in multi_v7_defconfig, and means that I can test
the pi1 with the 2835 defconfig in my normal environment.
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|
| #
4400d9ac |
| 31-Mar-2016 |
Eric Anholt <eric@anholt.net> |
ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
Combined with the queued DT changes, we now get HDMI and 3D support.
Signed-off-by: Eric Anholt <eric@anholt.net>
A
ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
Combined with the queued DT changes, we now get HDMI and 3D support.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
show more ...
|
| #
8d1a8c92 |
| 31-Mar-2016 |
Eric Anholt <eric@anholt.net> |
ARM: bcm2835: Enable CONFIG_PM.
The power domain driver we've enabled doesn't actually do anything
without it, and we need it to do its job for VC4 to initialize
successfully.
ARM: bcm2835: Enable CONFIG_PM.
The power domain driver we've enabled doesn't actually do anything
without it, and we need it to do its job for VC4 to initialize
successfully.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
show more ...
|
| #
bf9dbf50 |
| 31-Mar-2016 |
Eric Anholt <eric@anholt.net> |
ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
This approximately triples write performance for the SD card. My card
is too full of important data to collect very reliable number
ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
This approximately triples write performance for the SD card. My card
is too full of important data to collect very reliable numbers, but I
see 271.361% +/- 166.742% improvement (n=3 before, 6 after), for 'dd
if=/dev/zero of=/boot/asdf bs=1M count=3 oflag=dsync,direct'. Read
performance appears to be unaffected.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
show more ...
|
|
Revision tags: openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1 |
|
| #
aa6c53be |
| 06-Feb-2016 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Enable RPi power domain driver
After enabling the Raspberry Pi firmware driver which allow us to handle
power domains for USB or graphics.
Signed-off-by:
ARM: bcm2835_defconfig: Enable RPi power domain driver
After enabling the Raspberry Pi firmware driver which allow us to handle
power domains for USB or graphics.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|
| #
da496d12 |
| 06-Feb-2016 |
Stefan Wahren <stefan.wahren@i2se.com> |
ARM: bcm2835_defconfig: Enable RPi firmware driver
This enables the Raspberry Pi driver for GPU specific features.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-o
ARM: bcm2835_defconfig: Enable RPi firmware driver
This enables the Raspberry Pi driver for GPU specific features.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|
| #
e55345e7 |
| 06-Feb-2016 |
Stephen Warren <swarren@wwwdotorg.org> |
ARM: bcm2835_defconfig: enable ARMv7 support
This makes the RPi2 work; it has an ARMv7 CPU.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eri
ARM: bcm2835_defconfig: enable ARMv7 support
This makes the RPi2 work; it has an ARMv7 CPU.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
show more ...
|