MAINTAINERS: add the Renesas RZ/N1 USBF controller entry

After contributing the driver, add myself as the maintainer
for Renesas RZ/N1 USBF controller.

Signed-off-by: Herve Codina <herve.codina@boo

MAINTAINERS: add the Renesas RZ/N1 USBF controller entry

After contributing the driver, add myself as the maintainer
for Renesas RZ/N1 USBF controller.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230105152257.310642-6-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

MAINTAINERS: Update the ACPICA development list address

The previous ACPICA development list address, devel@acpica.org, started
to bounce some time ago and it is not likely to be restored, so replac

MAINTAINERS: Update the ACPICA development list address

The previous ACPICA development list address, devel@acpica.org, started
to bounce some time ago and it is not likely to be restored, so replace
it with a new one, acpica-devel@lists.linuxfoundation.org.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

MAINTAINERS: update fscrypt git repo

fscrypt.git is being renamed to linux.git, so update MAINTAINERS
accordingly. (The reasons for the rename are to match what I'm doing
for the new fsverity repo,

MAINTAINERS: update fscrypt git repo

fscrypt.git is being renamed to linux.git, so update MAINTAINERS
accordingly. (The reasons for the rename are to match what I'm doing
for the new fsverity repo, which also involves the branch names changing
to be clearer; and to avoid ambiguity with userspace tools.)

As long as I'm updating the fscrypt MAINTAINERS entry anyway, also:

- Move my name to the top, so that people bother me first if they just
choose the first person. (In practice I'm the primary maintainer, and
Ted and Jaegeuk are backups.)

- Remove an unnecessary wildcard.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230116233424.65657-1-ebiggers@kernel.org

show more ...

MAINTAINERS: update fsverity git repo, list, and patchwork

We're moving fsverity development to use its own git repo, mailing list,
and patchwork project, instead of reusing the fscrypt ones. Updat

MAINTAINERS: update fsverity git repo, list, and patchwork

We're moving fsverity development to use its own git repo, mailing list,
and patchwork project, instead of reusing the fscrypt ones. Update the
MAINTAINERS file accordingly.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230116232257.64377-1-ebiggers@kernel.org

show more ...

dt-bindings: net: add generic ethernet-switch-port binding

The dsa-port.yaml binding had several references that can be common to all
ethernet ports, not just dsa-specific ones. Break out the generi

dt-bindings: net: add generic ethernet-switch-port binding

The dsa-port.yaml binding had several references that can be common to all
ethernet ports, not just dsa-specific ones. Break out the generic bindings
to ethernet-switch-port.yaml they can be used by non-dsa drivers.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

dt-bindings: net: add generic ethernet-switch

The dsa.yaml bindings had references that can apply to non-dsa switches. To
prevent duplication of this information, keep the dsa-specific information
i

dt-bindings: net: add generic ethernet-switch

The dsa.yaml bindings had references that can apply to non-dsa switches. To
prevent duplication of this information, keep the dsa-specific information
inside dsa.yaml and move the remaining generic information to the newly
created ethernet-switch.yaml.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

spi: remove s3c24xx driver

The s3c24xx platform was removed,s o there are no remaining users
for its spi driver.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arn

spi: remove s3c24xx driver

The s3c24xx platform was removed,s o there are no remaining users
for its spi driver.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

clk: remove s3c24xx driver

The s3c24xx platform is gone, so the clk driver can be removed as
well.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@li

clk: remove s3c24xx driver

The s3c24xx platform is gone, so the clk driver can be removed as
well.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

mmc: remove s3cmci driver

The s3c24xx platform is gone, so this driver can be removed as well.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@l

mmc: remove s3cmci driver

The s3c24xx platform is gone, so this driver can be removed as well.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

power: remove s3c adc battery driver

The s3c-adc driver is removed along with the s3c24xx platform,
so the battery driver is no longer needed either.

Reviewed-by: Krzysztof Kozlowski <krzysztof.koz

power: remove s3c adc battery driver

The s3c-adc driver is removed along with the s3c24xx platform,
so the battery driver is no longer needed either.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: s3c: remove all s3c24xx support

The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exc

ARM: s3c: remove all s3c24xx support

The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exclusively for s3c24xx and not shared with s3c64xx,
as well as the glue logic in Kconfig and the maintainer file entries.

Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Christer Weinigel <christer@weinigel.se>
Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: openmoko-kernel@lists.openmoko.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

MAINTAINERS: arm64: tesla: correct pattern for directory

The path is actually not a pattern but a directory, so correct it to be
effective.

Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: htt

MAINTAINERS: arm64: tesla: correct pattern for directory

The path is actually not a pattern but a directory, so correct it to be
effective.

Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20230113104050.30856-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

show more ...

MAINTAINERS: Remove some obsolete drivers info(tdfx, mga, i810, savage, r128, sis)

Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked these drivers obsolete 7 years

MAINTAINERS: Remove some obsolete drivers info(tdfx, mga, i810, savage, r128, sis)

Commit 399516ab0fee ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked these drivers obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
3dfx Glide-->driver/gpu/drm/tdfx
Matrox-->driver/gpu/drm/mga
Intel i810-->driver/gpu/drm/i810
S3 Savage-->drivers/gpu/drm/savage
ATI Rage 128->drivers/gpu/drm/r128
Silicon Integrated Systems->drivers/gpu/drm/sis

It's time to remove these drivers.

Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-11-cai.huoqing@linux.dev

show more ...

net: dsa: microchip: ptp: add 4 bytes in tail tag when ptp enabled

When the PTP is enabled in hardware bit 6 of PTP_MSG_CONF1 register, the
transmit frame needs additional 4 bytes before the tail ta

net: dsa: microchip: ptp: add 4 bytes in tail tag when ptp enabled

When the PTP is enabled in hardware bit 6 of PTP_MSG_CONF1 register, the
transmit frame needs additional 4 bytes before the tail tag. It is
needed for all the transmission packets irrespective of PTP packets or
not.
The 4-byte timestamp field is 0 for frames other than Pdelay_Resp. For
the one-step Pdelay_Resp, the switch needs the receive timestamp of the
Pdelay_Req message so that it can put the turnaround time in the
correction field.
Since PTP has to be enabled for both Transmission and reception
timestamping, driver needs to track of the tx and rx setting of the all
the user ports in the switch.
Two flags hw_tx_en and hw_rx_en are added in ksz_port to track the
timestampping setting of each port. When any one of ports has tx or rx
timestampping enabled, bit 6 of PTP_MSG_CONF1 is set and it is indicated
to tag_ksz.c through tagger bytes. This flag adds 4 additional bytes to
the tail tag. When tx and rx timestamping of all the ports are disabled,
then 4 bytes are not added.

Tested using hwstamp -i <interface>

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com> # mostly api
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: thunderbolt: Move into own directory

We will be adding tracepoints to the driver so instead of littering the
main network driver directory, move the driver into its own directory.
While there,

net: thunderbolt: Move into own directory

We will be adding tracepoints to the driver so instead of littering the
main network driver directory, move the driver into its own directory.
While there, rename the module to thunderbolt_net (with underscore) to
match with the thunderbolt_dma_test convention.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

dt-bindings: crypto: add documentation for Aspeed ACRY

Add device tree binding documentation for the Aspeed
ECDSA/RSA ACRY Engines Controller.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Revi

dt-bindings: crypto: add documentation for Aspeed ACRY

Add device tree binding documentation for the Aspeed
ECDSA/RSA ACRY Engines Controller.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

ARM: sa1100: remove unused board files

The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and
Simpad machines were all marked as unused as there are no known users
left. Remove all of

ARM: sa1100: remove unused board files

The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and
Simpad machines were all marked as unused as there are no known users
left. Remove all of these, along with references to them in defconfig
files and drivers.

Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600
and Jornada 720, each of which had one person still using them, with
Collie also being supported in Qemu.

Cc: Peter Chubb <peter.chubb@unsw.edu.au>
Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

staging: media: remove davinci vpfe_capture driver

This driver was for the davinci dm644x and dm3xx platforms that are
now removed from the kernel, so there are no more users.

Acked-by: Hans Verkui

staging: media: remove davinci vpfe_capture driver

This driver was for the davinci dm644x and dm3xx platforms that are
now removed from the kernel, so there are no more users.

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: omap1: remove unused board files

All board support that was marked as 'unused' earlier can
now be removed, leaving the five machines that that still
had someone using them in 2022, or that are

ARM: omap1: remove unused board files

All board support that was marked as 'unused' earlier can
now be removed, leaving the five machines that that still
had someone using them in 2022, or that are supported in
qemu.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

scsi: MAINTAINERS: Add myself as the maintainer for Qcom UFS drivers

Qcom UFS drivers are left unmaintained till now. I'd like to step up to
maintain the drivers and the binding.

Acked-by: Bjorn An

scsi: MAINTAINERS: Add myself as the maintainer for Qcom UFS drivers

Qcom UFS drivers are left unmaintained till now. I'd like to step up to
maintain the drivers and the binding.

Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

MAINTAINERS: update Robert Foss' email address

Update the email address for Robert's maintainer entries and fill in
.mailmap accordingly.

Link: https://lkml.kernel.org/r/20230106152151.115648-1-rob

MAINTAINERS: update Robert Foss' email address

Update the email address for Robert's maintainer entries and fill in
.mailmap accordingly.

Link: https://lkml.kernel.org/r/20230106152151.115648-1-robert.foss@linaro.org
Signed-off-by: Robert Foss <rfoss@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vasily Averin <vasily.averin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

MAINTAINERS: Add f2fs's patchwork

>From now on, f2fs also has its own patchwork link, thanks to Jaegeuk
for starting this tool!

Let's update it to f2fs entry.

Signed-off-by: Yangtao Li <frank.li@v

MAINTAINERS: Add f2fs's patchwork

>From now on, f2fs also has its own patchwork link, thanks to Jaegeuk
for starting this tool!

Let's update it to f2fs entry.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

show more ...

drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY

This patch adds support for the onsemi NCN26000 10BASE-T1S industrial
Ethernet PHY. The driver supports Point-to-Multipoint operati

drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY

This patch adds support for the onsemi NCN26000 10BASE-T1S industrial
Ethernet PHY. The driver supports Point-to-Multipoint operation without
auto-negotiation and with link control handling. The PHY also features
PLCA for improving performance in P2MP mode.

Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

drivers/net/phy: add helpers to get/set PLCA configuration

This patch adds support in phylib to read/write PLCA configuration for
Ethernet PHYs that support the OPEN Alliance "10BASE-T1S PLCA
Manage

drivers/net/phy: add helpers to get/set PLCA configuration

This patch adds support in phylib to read/write PLCA configuration for
Ethernet PHYs that support the OPEN Alliance "10BASE-T1S PLCA
Management Registers" specifications. These can be found at
https://www.opensig.org/about/specifications/

Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net/ethtool: add netlink interface for the PLCA RS

Add support for configuring the PLCA Reconciliation Sublayer on
multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g.,
10BASE-T1S). This p

net/ethtool: add netlink interface for the PLCA RS

Add support for configuring the PLCA Reconciliation Sublayer on
multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g.,
10BASE-T1S). This patch adds the appropriate netlink interface
to ethtool.

Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...