Use the tables at the top of the page to manage firmware images that are currently available on the BMC. The image at the top of the table is the Primary image, which will be used the next time the device is booted. To change which image is Primary, move the image you want to use as the Primary to the top of the tablw using the arrows.
Use the Upload images section of this page to transfer new firmware images to the BMC. After uploading a new image, activate it to make it available for use.
Server images
In-memory firmware version: v1.99.4-82-g874f12e
Host: 1.2.3
Linux: 2.3.4
Other OS: 4.5.6
Saved
BMC images
In-memory firmware version: v4.0.4-83r
Specify an image file located on your workstation or a TFTP server. An image file may contain firmware images for the server, BMC, or other hardware devices. Each image that you upload will be unpacked from the image file, and added to the appropriate list above.