# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Samsung Exynos7885 SoC clock controller

maintainers:
  - Dávid Virág <virag.david003@gmail.com>
  - Chanwoo Choi <cw00.choi@samsung.com>
  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
  - Sylwester Nawrocki <s.nawrocki@samsung.com>
  - Tomasz Figa <tomasz.figa@gmail.com>

description: |
  Exynos7885 clock controller is comprised of several CMU units, generating
  clocks for different domains. Those CMU units are modeled as separate device
  tree nodes, and might depend on each other. The root clock in that root tree
  is an external clock: OSCCLK (26 MHz). This external clock must be defined
  as a fixed-rate clock in dts.

  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.

  Each clock is assigned an identifier and client nodes can use this identifier
  to specify the clock which they consume. All clocks available for usage
  in clock consumer nodes are defined as preprocessor macros in
  'dt-bindings/clock/exynos7885.h' header.

properties:
  compatible:
    enum:
      - samsung,exynos7885-cmu-top
      - samsung,exynos7885-cmu-core
      - samsung,exynos7885-cmu-peri

  clocks:
    minItems: 1
    maxItems: 10

  clock-names:
    minItems: 1
    maxItems: 10

  "#clock-cells":
    const: 1

  reg:
    maxItems: 1

allOf:
  - if:
      properties:
        compatible:
          contains:
            const: samsung,exynos7885-cmu-top

    then:
      properties:
        clocks:
          items:
            - description: External reference clock (26 MHz)

        clock-names:
          items:
            - const: oscclk

  - if:
      properties:
        compatible:
          contains:
            const: samsung,exynos7885-cmu-core

    then:
      properties:
        clocks:
          items:
            - description: External reference clock (26 MHz)
            - description: CMU_CORE bus clock (from CMU_TOP)
            - description: CCI clock (from CMU_TOP)
            - description: G3D clock (from CMU_TOP)

        clock-names:
          items:
            - const: oscclk
            - const: dout_core_bus
            - const: dout_core_cci
            - const: dout_core_g3d

  - if:
      properties:
        compatible:
          contains:
            const: samsung,exynos7885-cmu-peri

    then:
      properties:
        clocks:
          items:
            - description: External reference clock (26 MHz)
            - description: CMU_PERI bus clock (from CMU_TOP)
            - description: SPI0 clock (from CMU_TOP)
            - description: SPI1 clock (from CMU_TOP)
            - description: UART0 clock (from CMU_TOP)
            - description: UART1 clock (from CMU_TOP)
            - description: UART2 clock (from CMU_TOP)
            - description: USI0 clock (from CMU_TOP)
            - description: USI1 clock (from CMU_TOP)
            - description: USI2 clock (from CMU_TOP)

        clock-names:
          items:
            - const: oscclk
            - const: dout_peri_bus
            - const: dout_peri_spi0
            - const: dout_peri_spi1
            - const: dout_peri_uart0
            - const: dout_peri_uart1
            - const: dout_peri_uart2
            - const: dout_peri_usi0
            - const: dout_peri_usi1
            - const: dout_peri_usi2

required:
  - compatible
  - "#clock-cells"
  - clocks
  - clock-names
  - reg

additionalProperties: false

examples:
  # Clock controller node for CMU_PERI
  - |
    #include <dt-bindings/clock/exynos7885.h>

    cmu_peri: clock-controller@10010000 {
        compatible = "samsung,exynos7885-cmu-peri";
        reg = <0x10010000 0x8000>;
        #clock-cells = <1>;

        clocks = <&oscclk>,
                 <&cmu_top CLK_DOUT_PERI_BUS>,
                 <&cmu_top CLK_DOUT_PERI_SPI0>,
                 <&cmu_top CLK_DOUT_PERI_SPI1>,
                 <&cmu_top CLK_DOUT_PERI_UART0>,
                 <&cmu_top CLK_DOUT_PERI_UART1>,
                 <&cmu_top CLK_DOUT_PERI_UART2>,
                 <&cmu_top CLK_DOUT_PERI_USI0>,
                 <&cmu_top CLK_DOUT_PERI_USI1>,
                 <&cmu_top CLK_DOUT_PERI_USI2>;
        clock-names = "oscclk",
                      "dout_peri_bus",
                      "dout_peri_spi0",
                      "dout_peri_spi1",
                      "dout_peri_uart0",
                      "dout_peri_uart1",
                      "dout_peri_uart2",
                      "dout_peri_usi0",
                      "dout_peri_usi1",
                      "dout_peri_usi2";
    };

...
